Secura B90B-MMF-015

Contents

User Manual

Secura Electric Milk Frother Replacement Mixer Set

Introduction

This manual provides instructions for the B90B-MMF-015 Electric Milk Frother and Heater Replacement Mixer Set, designed exclusively for Secura automatic electric milk frother and warmer models. Please read this manual carefully before use to ensure proper installation and operation.

Compatibility

This replacement whisk set is specifically designed for the following Secura automatic electric milk frother and warmer models:

  • MMF-015
  • MMF-003 (250 ml)
  • MMF-003B (250 ml)
  • MMF-603 (500 ml)
  • MMF-615 (500 ml)

Important: This replacement whisk set is not compatible with other brands or models.

Package Contents

Your package should contain the following items:

  • 1 x Frothing Whisk (spring coil design)
  • 1 x Heating Whisk (solid plastic design)
Top view of the frothing whisk (spring coil) and heating whisk (solid plastic piece).
Figure 1: Frothing Whisk (top) and Heating Whisk (bottom)

The frothing whisk features a spring coil for creating foam, while the heating whisk is a solid plastic piece for stirring and heating milk without frothing.

Specifications

Feature Description
Model B90B-MMF-015 (Replacement Mixer Set)
Compatible Frother Models Secura MMF-015, MMF-003, MMF-003B, MMF-603, MMF-615
Material Plastic + Rustproof Stainless Steel 304 (for frothing whisk)
Color Black
Frothing Whisk Dimensions Diameter: 1.18 inches (3 cm), Height: 0.55 inches (1.4 cm)
Heating Whisk Dimensions Width: 0.78 inches (2 cm), Height: 0.55 inches (1.4 cm)
Noise Level 45dB Low Noise (characteristic of compatible frothers)
Food Grade Yes
Dishwasher Safe Yes
Detailed dimensions of the frothing and heating whisks, along with key features like rustproof stainless steel, dishwasher safe, low noise, and food grade materials.
Figure 2: Whisk Dimensions and Features

This image illustrates the physical dimensions and material properties of the replacement whisks.

Setup and Installation

Before installing the replacement whisk, ensure your Secura milk frother is unplugged and cool.

  1. Identify the correct whisk:
    • Use the Frothing Whisk (with the spring coil) for creating milk foam.
    • Use the Heating Whisk (solid plastic piece) for heating milk without frothing.
  2. Remove the old whisk: Gently pull the existing whisk from the bottom of the frother's interior.
  3. Insert the new whisk: Align the center hole of the desired replacement whisk with the spindle at the bottom of the frother. Push down firmly until it clicks securely into place.
Secura milk frother with the frothing and heating whisks shown separately, indicating where they attach inside the frother. Max and Min fill lines are visible.
Figure 3: Frother Unit with Whisks and Fill Lines

This image shows the frother unit and the two whisks, illustrating their placement and the internal MAX/MIN indicators.

Operating Instructions (with installed whisk)

Once the correct whisk is installed, operate your Secura milk frother according to its original manual. The replacement whisks function identically to the original parts.

  1. For Heating Milk (without froth):
    • Install the Heating Whisk (solid plastic piece).
    • Pour milk into the frother, ensuring it does not exceed the 'MAX' fill line for heating.
    • Close the lid and press the appropriate button on your frother for heating.
  2. For Frothing Milk (hot or cold):
    • Install the Frothing Whisk (spring coil design).
    • Pour milk into the frother, ensuring it does not exceed the 'MAX' fill line for frothing (which is typically lower than the heating MAX line due to foam expansion). Refer to your frother's manual for exact fill lines.
    • Close the lid and press the appropriate button on your frother for frothing (hot or cold, depending on your model's capabilities).
Diagram showing the heating whisk used for hot milk and the frothing whisk used for frothed milk, with images of a cup of hot milk and a cup of frothed coffee.
Figure 4: Whisk Selection for Desired Outcome

This diagram visually explains which whisk to use for heating milk versus frothing milk.

Care and Maintenance

Proper care will extend the life of your replacement whisks.

  • Cleaning: The whisks are dishwasher safe. For manual cleaning, rinse immediately after use with warm, soapy water. Use a soft brush if necessary to remove any milk residue.
  • Drying: Ensure whisks are completely dry before storing or re-installing.
  • Storage: Store whisks in a clean, dry place when not in use.
  • Material: The frothing whisk is made of rustproof Stainless Steel 304, and both whisks are food-grade plastic, ensuring durability and safety.

Troubleshooting

If you encounter issues with your milk frother after replacing the whisk, consider the following:

  • No Froth / Poor Froth:
    • Ensure the Frothing Whisk (spring coil) is correctly installed.
    • Check that the milk level is within the frother's specified 'MAX' frothing line. Overfilling can prevent proper frothing.
    • Ensure the whisk is clean and free of obstructions.
  • Milk Not Heating:
    • Ensure the Heating Whisk (solid plastic) is correctly installed, or if frothing, that the frothing whisk is properly seated.
    • Verify the milk level is within the 'MAX' heating line.
    • Confirm the frother unit itself is functioning correctly (refer to your frother's original manual).
  • Whisk Detaches During Operation:
    • Ensure the whisk was pushed down firmly until it clicked into place during installation.
    • Inspect the whisk and the frother's spindle for any damage or wear.

For issues not related to the whisk, please consult the original user manual for your Secura milk frother.

User Tips

  • Always use cold milk for best frothing results.
  • For thicker froth, use milk with higher fat content.
  • Clean the whisk immediately after use to prevent milk residue from drying and becoming difficult to remove.

Warranty and Support

This replacement whisk set is designed to be a direct replacement for original Secura frother parts. For warranty information regarding your Secura milk frother, please refer to the documentation provided with your original appliance or contact Secura customer support directly.

If you have questions specifically about the B90B-MMF-015 replacement whisk set, please contact the seller or manufacturer of this replacement part.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.