GODIAG GT115

Contents

GODIAG GT115 IMMO System Test Platform User Manual

Model: GT115

1. Product Overview

The GODIAG GT115 is a sophisticated connecting cable and test platform specifically engineered for the V-A-G MQB IMMO system. This tool is indispensable for engineers and technicians performing off-vehicle operations such as IMMO programming, key matching, and diagnostic procedures on MQB IMMO systems. It features advanced POGO PIN technology, ensuring stable and precise data reading and writing directly to the vehicle's dashboard without causing damage to the cables or components.

The MQB (Modular Transverse Matrix) architecture is a widely used platform for various V-A-G models, encompassing a range from superminis to large family cars, and replaces older platforms like PQ25, PQ35, and PQ46. The GT115 is designed to support these modern vehicle systems.

GODIAG GT115 IMMO System Test Platform with various cables and connectors
Figure 1: GODIAG GT115 IMMO System Test Platform and included components.

2. Product Features and Functions

2.1 Key Features

  • Synchronous Detection: Effortlessly detect keys and vehicle IMMO modules.
  • Independent Diagnostics: Perform standalone diagnostics for engine and power expansion modules.
  • Gateway Communication: Conduct communication diagnostics and programming tests for engine and power modules via the gateway.
  • POGO PIN Technology: Read and write data to the dashboard with precision and stability.
  • Comprehensive Testing: Test BCM modules through the gateway for seamless communication and programming.
  • Real-Time Monitoring: Display current power supply voltage and module current for accurate diagnostics.
  • Battery Voltage Detection: Ensure optimal performance with 2032 battery voltage detection.

2.2 Detailed Functions

  1. Synchronous detection of key and vehicle IMMO module.
  2. Independent diagnosis of engine and power expansion module.
  3. Communication diagnosis and programming test of engine module and power module through gateway module.
  4. IMMO 4th generation POGO PIN read and write data and key synchronization detection.
  5. Connect BCM module with gateway module for communication diagnosis and programming test (Note: Press the corresponding switch when required).
  6. Gateway module detection.
  7. Current connected power supply voltage display.
  8. Current connected module current display.
  9. 2032 battery voltage detection.
  10. With POGO PIN to read and write data to the dashboard.

3. Setup and Connection

3.1 General Connection Diagram

The GT115 platform connects to various vehicle modules and a computer for diagnostic and programming tasks. Ensure all connections are secure before powering on the device.

Wiring diagram for V-A-G MQB IMMO System showing connections to Gateway, BCM, Dashboard, Engine, and a laptop
Figure 2: General connection diagram for V-A-G MQB IMMO System using GODIAG GT115.
Wiring diagram for V-A-G CAN-Bus UDS 4th Generation IMMO System showing connections to various modules and a laptop
Figure 3: Connection diagram for V-A-G CAN-Bus UDS 4th Generation IMMO System.

3.2 POGO PIN Connection Procedure

The POGO PIN feature allows for direct and stable data reading and writing to the dashboard. Follow these steps carefully:

  1. Connect the power supply to the GT115. Note: The power switch on the GT115 must be OFF initially.
  2. Press the IGN ignition power switch to the ON position.
  3. Connect the instrument plug to the GT115.
  4. Identify the correct POGO PIN connection point on the dashboard. Carefully connect the probe from the GT115 to this point.
  5. Turn on the main power switch of the GT115 for 3-5 seconds.
  6. Observe the ABS light on the dashboard. If it flashes, you have successfully entered POGO PIN read/write mode.
Close-up image showing the POGO PIN probe connected to a dashboard circuit board
Figure 4: POGO PIN probe connected to a dashboard for data access.
Detailed view of the POGO PIN connection area on a dashboard
Figure 5: Detailed view of POGO PIN connection points.

4. Operating Instructions

Once the GT115 is properly set up and connected, you can proceed with various diagnostic and programming operations. Always refer to the specific software or diagnostic tool you are using in conjunction with the GT115 for detailed operational steps.

4.1 IMMO System Operations

  • IMMO Programming: Use the GT115 to facilitate the programming of new keys or IMMO modules.
  • Key Matching: Perform procedures to match new or existing keys to the vehicle's IMMO system.
  • IMMO Data Read/Write: Utilize the POGO PIN for direct reading and writing of IMMO data from/to the dashboard.

4.2 Diagnostic Procedures

  • Engine and Power Module Diagnosis: Conduct independent diagnostics on these modules to identify faults.
  • Gateway Communication Diagnosis: Test communication between the engine/power modules and the gateway.
  • BCM Module Testing: Connect and diagnose the BCM module via the gateway. Remember to activate the corresponding switch on the GT115 when testing the BCM module.

4.3 Real-Time Monitoring

The GT115 provides real-time feedback:

  • Voltage Display: Monitor the current connected power supply voltage.
  • Current Display: Observe the current drawn by the connected module.
  • Battery Voltage: Check the voltage of the 2032 battery, if applicable.

5. Maintenance

To ensure the longevity and optimal performance of your GODIAG GT115, follow these maintenance guidelines:

  • Cleaning: Keep the device and its connectors clean and free from dust and debris. Use a soft, dry cloth for cleaning. Avoid liquid cleaners.
  • Storage: Store the GT115 in a cool, dry place away from direct sunlight, extreme temperatures, and high humidity.
  • Cable Care: Handle all cables and connectors with care. Avoid bending or pulling them excessively, which can damage internal wiring.
  • POGO PIN Protection: When not in use, ensure the POGO PIN probe is protected to prevent damage to its delicate tip.

6. Troubleshooting

If you encounter issues while using the GODIAG GT115, consider the following:

  • No Power/Device Not Responding:
    • Check all power connections. Ensure the power supply is correctly connected and providing adequate voltage.
    • Verify that the power switch on the GT115 is in the ON position.
  • Communication Errors:
    • Ensure all cables are securely connected to the GT115, the vehicle modules, and the diagnostic computer.
    • Confirm that the correct diagnostic software is running and properly configured for the vehicle and operation.
    • For BCM module testing, ensure the corresponding switch on the GT115 is activated.
  • POGO PIN Read/Write Issues:
    • Double-check that the POGO PIN probe is making firm and correct contact with the designated point on the dashboard.
    • Ensure the power switch was turned on for the specified 3-5 seconds after connecting the probe.
    • Confirm the ABS light flashes, indicating successful entry into read/write mode. If not, repeat the POGO PIN connection procedure.
  • Incorrect Readings (Voltage/Current):
    • Verify the GT115 is correctly connected to the power source and the module being monitored.
    • Check the 2032 battery voltage if the issue relates to battery-powered functions.

7. Specifications

AttributeDetail
Brand NameGODIAG
ModelGT115
Item NumberHKSF414
OriginMainland China
CertificationNONE
High-concerned chemicalNone
Package Length20 cm
Package Width15 cm
Package Height5 cm
Package Weight0.5 kg

8. User Tips

  • Verify Application: The GODIAG GT115 is specifically designed for V-A-G MQB IMMO systems (IMMO4, CAN-Bus UDS 4th Generation). It is not intended for cloning transmission modules or other non-IMMO related systems in vehicles like GMC or Chevrolet Cruze/Traverse. Always confirm the tool's compatibility with the specific vehicle system you intend to work on.
  • Software Integration: The GT115 acts as a hardware interface. Its full functionality is realized when used in conjunction with compatible diagnostic and programming software. Ensure your software is up-to-date and correctly configured.
  • Safety First: Always disconnect the vehicle's battery or ensure proper power management before connecting or disconnecting modules to avoid electrical damage.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your original point of purchase or the manufacturer directly. Keep your purchase receipt and product serial number handy for faster service.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.