Introduction
Thank you for choosing the HICON HZB-16Z Automatic Ice Maker. This compact and efficient appliance is designed to provide you with fresh ice cubes quickly and conveniently, whether at home, in a dormitory, or during outdoor activities. Featuring advanced functions like UV disinfection, automatic cleaning, and intelligent sensing, it ensures a hygienic and hassle-free ice-making experience.
This manual provides essential information for the safe and effective operation and maintenance of your ice maker. Please read it thoroughly before first use and keep it for future reference.

The HICON HZB-16Z Ice Maker is lightweight, small, and easy to carry, making it suitable for various settings.
Setup
- Unpacking: Carefully remove the ice maker from its packaging. Ensure all components are present and undamaged.
- Placement: Place the ice maker on a stable, level surface away from direct sunlight and heat sources. Ensure adequate ventilation around the unit. Its compact size makes it easy to place in various locations, including dormitories or offices.
- Initial Cleaning: Before first use, it is recommended to clean the interior of the ice maker. Refer to the 'Maintenance' section for detailed cleaning instructions.
- Water Addition: The HZB-16Z uses a manual water addition method. Open the lid and pour clean drinking water into the water reservoir up to the maximum fill line. The water injection volume is 1.2L.
- Power Connection: Connect the power cord to a suitable 220V/50Hz power outlet.
Product demonstration video showing manual water addition and ice making process.
Operating Instructions
- Start Ice Making: After adding water and connecting power, press the 'On/Off' button to start the ice-making cycle. The machine will automatically begin producing ice.
- Ice Output Time: The HZB-16Z can produce ice cubes in approximately 6-13 minutes per cycle. Each cycle yields 9 round ice cubes.
- Adjusting Ice Cube Size: Use the 'Select' button to switch between small and large ice cube modes. This allows you to choose the appropriate ice thickness for different beverages, such as small ice for smoothies and large ice for cocktails.
- Automatic Sensing: The ice maker is equipped with an infrared sensor that automatically detects the ice volume. It will stop ice production when the ice basket is full and resume when ice is removed. It also features a water shortage stop function to prevent dry burning.
- UV Disinfection: The unit includes a UV disinfection lamp, which helps maintain hygiene by sterilizing the water and ice-making components, achieving a sterilization rate of up to 99.9% against common pathogenic bacteria.

Control panel showing options for ice size, UV disinfection, and automatic cleaning.

Infrared automatic detection ensures ice production stops when full and prevents dry burning when water is low.
Maintenance
- Automatic Cleaning: The HZB-16Z features an automatic pipeline cleaning mode. To activate, long-press the 'On/Off' button for eight seconds. The cleaning cycle lasts for 30 minutes, ensuring hygienic operation and caring for family health.
- Drainage: The ice maker is designed with hands-free sunken drainage, making it easier to clear stored water and prevent residue buildup. Regularly drain any remaining water to maintain cleanliness.
- Exterior Cleaning: Wipe the exterior of the ice maker with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Storage: If storing the ice maker for an extended period, ensure it is thoroughly cleaned and dried. Drain all water and store in a cool, dry place.

The automatic cleaning function helps maintain the hygiene of the ice maker's internal pipelines.

Hands-free sunken drainage simplifies the process of emptying the water reservoir.
Troubleshooting
- Ice maker not producing ice: Check if the water reservoir is filled to the appropriate level. Ensure the power cord is securely plugged in.
- Ice cubes are too small or too large: Adjust the ice cube size setting using the 'Select' button on the control panel.
- 'Water Shortage' indicator is on: Add water to the reservoir. The machine will automatically resume ice production.
- 'Ice Full' indicator is on: Remove ice from the ice basket. The machine will automatically resume ice production.
- Unusual noise: Ensure the unit is placed on a stable, level surface. If the noise persists, contact customer support.
- Poor ice quality: Ensure you are using clean, filtered water. Regularly perform the automatic cleaning cycle.
For issues not covered here, please refer to the Warranty/Support section for assistance.
Specifications

Detailed product parameters for the HICON HZB-16Z Ice Maker.
| Feature | Specification |
|---|---|
| Product Model | HZB-16Z |
| Power | 95W |
| Voltage/Frequency | 220V/50Hz |
| Water Injection Volume | 1.2L |
| Ice Output Time | 6-13 minutes |
| Ice Cube Shape | Round ice cubes |
| 24H Ice Production | 12kg |
| Net Weight | 6.1KG |
| Machine Size (LxWxH) | 222x294x290 mm (with base) |
| Water Inlet Method | Manual water addition |
| Disinfection Feature | UV Disinfection Lamp (99.9% sterilization rate) |
| Cleaning Feature | Automatic Pipeline Cleaning |
| Sensing Technology | Infrared Automatic Detection (Ice full/Water shortage stop) |
| Insulation | Three-layer foam process |
User Tips
- Optimize Ice Size: Experiment with both small and large ice cube settings to find the perfect fit for your drinks. Small ice is great for quick chilling of juices or smoothies, while large ice is ideal for slower-melting in cocktails or whiskey.
- Regular Cleaning is Key: Make it a habit to run the automatic cleaning cycle periodically, especially if you use the ice maker frequently. This ensures the internal components remain hygienic and free from mineral buildup.
- Monitor Water and Ice Levels: Although the machine has automatic sensors, a quick glance through the transparent window can help you anticipate when to add water or empty the ice basket, ensuring continuous ice production.
- Use Quality Water: For the best tasting and clearest ice, always use filtered or purified water. This also helps prolong the life of your ice maker.
Warranty and Support
For warranty information, technical support, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.