Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Yeelight Smart LED Bulb W4 Lite E27. Please read this manual thoroughly before use to ensure proper functionality and safety.

Figure 1: User Manual Cover for Yeelight Smart LED Bulb W4L Dimmable
Important Safety Warnings
- Ensure the power is OFF before installing, removing, or examining the light bulb to prevent electric shock.
- Do not use this product in a lamp with a dimmer (e.g., a desk lamp with a round dimmer switch) to avoid damaging the product.
- Do not use this product in a damp environment.
- Avoid using the light bulb in a narrow and ill-ventilated lamp shade, as this may cause weak signals or heat dissipation issues.
- This product is for indoor use only.
- Do not disassemble this product, as the light diodes can cause eye damage.
- The light bulb will generate heat during operation. Ensure sufficient ventilation for proper heat dissipation.
- For lamps where this bulb replaces a significantly lighter one, be aware that the increased weight might reduce the mechanical stability of the luminaire and lampholder, potentially affecting contact and retention.
- Maintain a separation distance of at least 20cm between the antenna and the user's body during normal use.
- The light source (LEDs) in this product is fixed and non-replaceable.
Setup and Installation
1. Install the Bulb
- Ensure the power to the light fixture is turned off at the switch.
- Carefully screw the Yeelight Smart LED Bulb W4 Lite into an E27 lamp holder.
- Turn on the power to the light fixture.

Figure 2: Bulb Installation Steps
2. Connect with Mi Home / Xiaomi Home App
The Yeelight Smart LED Bulb W4 Lite can be controlled via the Mi Home / Xiaomi Home app, allowing interaction with other smart home devices.
- Download the Mi Home / Xiaomi Home app:
- Scan the QR code below to download and install the app. If the app is already installed, you will be directed to the connection setup page.
- Alternatively, search for "Mi Home / Xiaomi Home" in your device's app store.
- Add your device:
- Open the Mi Home / Xiaomi Home app.
- Tap the "+" icon in the upper right corner.
- Follow the on-screen prompts to add your Yeelight Smart LED Bulb.

Figure 3: Scan to download Mi Home / Xiaomi Home App
Note: The app version may be updated. Please follow the instructions within the current app version.
3. Apple HomeKit Smart Control
To integrate your Yeelight Smart LED Bulb with Apple HomeKit:
- Open the Home app on your iPhone or iPad.
- Tap "Add Accessory".
- Scan the HomeKit QR code located on the back cover of this user manual or directly on the lamp. Alternatively, enter the 8-digit setup code found above the QR code to grant access.
Important HomeKit Notes:
- Ensure a Wi-Fi network with Internet access is available. This product does not support 5 GHz networks; use a 2.4 GHz network.
- It is recommended to use iOS 9.0 or above for controlling HomeKit-compatible accessories.
- The HomeKit setup code is crucial. Do not lose it. If you restore factory settings and re-add the product to the Home app, you will need this code again.
- If the user manual is lost, scan the QR code or enter the setup code found on the lamp itself.
Operation
Smart Control Features
- Voice Control: Compatible with major smart home platforms like Google Assistant, Apple HomeKit, Amazon Alexa, Samsung SmartThings, and Yandex Alice, allowing easy voice management.
- Smart Interaction: Integrate with various smart home ecosystems for seamless control and automation.
- Adjustable Color Temperature: Adjust the light from 2700K (warm white) to 6500K (cool white) to suit any mood or activity.
- Adjustable Brightness: Dim the light from 5% to 100% to create the perfect ambiance.
- Smart Scenarios: Utilize pre-set or custom scenarios for various activities like movie night, reading, or parties.

Figure 4: Voice Control and App Interface
Dynamic Lighting and Customization
- 16 Million Colors (Multicolor Model YLQPD-0011): Choose from a vast spectrum of colors to create the perfect ambiance for any occasion, from vibrant parties to immersive gaming.
- Music Sync: Synchronize the bulb's changing colors with your favorite music for a dynamic lighting experience.
- Game Sync: Enjoy an immersive gaming experience with light effects triggered by in-game actions, compatible with platforms like Razer Chroma™ RGB and Overworlf.
- Group Control & Customized Lighting Scenes: Group multiple bulbs and customize lighting scenes (e.g., movie night, birthday, cozy home, reading, candle flicker) within the Yeelight App.
- Scheduled Smart Bulb: Program timers and routines in the app to automate your smart home lighting, simulating sunlight or night light according to your daily schedule.

Figure 5: Product Highlights and Features

Figure 6: Immersive Gaming Experience
Over-the-Air (OTA) Updates
The smart LED bulb supports OTA updates, ensuring that you always have access to the most advanced features and the newest software versions in real-time, enhancing security and functionality.

Figure 7: OTA Update Process
Maintenance
- Ensure the bulb is used in dry locations only.
- To clean the bulb, ensure power is disconnected. Wipe gently with a dry, soft cloth. Do not use liquid cleaners.
- The light source (LEDs) in this product is non-replaceable. Do not attempt to disassemble or repair the bulb.
- Regularly check for and install firmware updates via the Yeelight app to ensure optimal performance and access to new features.
Troubleshooting
- Weak Signal or Heat Issues: If you experience weak signals or the bulb heats up excessively, ensure it is not used in a narrow or ill-ventilated lamp shade. Provide sufficient airflow around the bulb.
- App Connectivity Problems:
- Verify your Wi-Fi network is 2.4 GHz, as the bulb does not support 5 GHz networks.
- Ensure your smartphone and the bulb are connected to the same Wi-Fi network during setup.
- Check for app updates and ensure you are running the latest version of the Mi Home / Xiaomi Home or Yeelight app.
- Restart your Wi-Fi router and the bulb.
- HomeKit Setup Code Lost: If you lose the user manual with the HomeKit setup code, the code is also printed on the lamp itself.
- Bulb Not Responding: Try turning the power off and on at the switch to reset the bulb. If issues persist, consider a factory reset (refer to app instructions for this process).
Specifications
| Feature | Specification |
|---|---|
| Product Name | Yeelight Smart LED Bulb W4 Lite (Color/White) |
| Model | YLQPD-0011 (Multicolor), YLQPD-0012 (White) |
| Lamp Holder | E27 |
| Rated Power | 9W |
| Luminous Flux | 806lm |
| Rated Input | 220-240 V~50/60 Hz 0.085 A |
| Color Temperature Range | 2700-6500K |
| Dimming Depth | 5% - 100% |
| Wireless Connectivity | Wi-Fi IEEE 802.11 b/g/n 2.4 GHz, BLE (Bluetooth Low Energy) |
| Service Life | Approx. 15,000 h |
| Operating Temperature | -10°C to 40°C |
| Operating Humidity | 0-85% RH |
| Operating Frequency | 2412 - 2480 MHz |
| Maximum Output Power | 20 dBm |
| Dimensions | Ø60 × 110 mm |
| Package Weight | 0.101 kg |
| Package Dimensions (L x W x H) | 13 cm x 9 cm x 7 cm |
| Certification | CE |
| Power Source | AC |
| Installation Method | Self-contained |
| Origin | Mainland China |
User Tips
- For the full range of smart features, always use the official Yeelight or Mi Home / Xiaomi Home app.
- When setting up, ensure your Wi-Fi router is configured for 2.4 GHz, as the bulb is not compatible with 5 GHz networks.
- Take advantage of the group control feature in the app to manage multiple bulbs simultaneously and create synchronized lighting effects.
- Explore the various pre-set scenes in the app, or create your own custom scenes to match different moods and activities.
Compliance and Support
EU Declaration of Conformity
Hereby, Qingdao Yeelink Information Technology Co., Ltd., declares that the radio equipment type YLQPD-0012 is in compliance with Directive 2014/53/EU.
UK Declaration of Conformity
Hereby, Qingdao Yeelink Information Technology Co., Ltd. declares that the radio equipment type YLQPD-0012 is in compliance with Radio Equipment Regulations 2017.
WEEE Disposal and Recycling
All products bearing the WEEE symbol (a crossed-out wheeled bin) indicate that they should not be mixed with unsorted household waste. To protect human health and the environment, please dispose of your waste equipment at a designated collection point for the recycling of waste electrical and electronic equipment, as appointed by the government or local authorities. Correct disposal and recycling help prevent potential negative consequences to the environment and human health. Contact your installer or local authorities for more information on collection points and terms.
Additional Resources
For a complete user manual and additional documentation, please refer to the official PDF document: Yeelight Smart LED Bulb W4L User Manual (PDF).