Motorola One 5G Ace XT2113-2 XT2113-5

Contents

Motorola One 5G Ace LCD Display Screen Touch Panel Digitizer with Frame User Manual

Models: XT2113-2, XT2113-5

1. Introduction

This manual provides detailed instructions for the proper installation, testing, and care of your new Motorola One 5G Ace LCD Display Screen Touch Panel Digitizer with Frame. Please read all instructions carefully before proceeding with installation to ensure optimal performance and prevent damage.

2. Safety Information

  • Always power off your device completely and disconnect the battery before beginning any repair.
  • Use appropriate tools to avoid damaging components.
  • Handle the display assembly by its edges to prevent damage to the screen or flex cables.
  • Static electricity can damage electronic components. Consider using an anti-static wrist strap.
  • If you are unsure about any step, seek professional assistance.

3. Package Contents

Verify that your package contains the following items:

  • 1x LCD Display Screen Touch Panel Digitizer with Frame for Motorola One 5G Ace
  • 1x Universal Tool Set (may vary)
Motorola One 5G Ace LCD Display Assembly with Frame and Repair Tools
Motorola One 5G Ace LCD Display Assembly with Frame and Repair Tools

4. Specifications

AttributeValue
TypeLCD & Touch Screen Digitizer
Model NumberFor Motorola One 5G Ace
LCD KitYes
Touch Screen TypeCapacitive Screen
Screen Size> 3"
MaterialIPS
CertificationNONE
High-concerned chemicalNone
OriginMainland China

5. Setup and Installation

5.1. Pre-Installation Test

It is crucial to test the new display assembly before fully installing it into your device. This ensures the part is functional and prevents unnecessary damage during a full installation.

  1. Check for Damage: Carefully inspect the packing box, the new screen, and its flex cables for any visible damage. If any damage is found, do not proceed with installation and contact support.
  2. Connect Flex Cable: Without using any adhesive, carefully connect the flex cable(s) of the new display to the corresponding connector(s) on your phone's motherboard. Ensure a secure but temporary connection.
  3. Power On and Test: Reconnect the battery (if removed) and power on your phone. Perform a thorough test of the display functions, including:
    • Screen display (check for dead pixels, discoloration, lines).
    • Touch functionality (test all areas of the screen, multi-touch).
    • Brightness adjustment.
    • Proximity sensor (if applicable).
  4. Power Off: If the test is successful, power off your phone again and disconnect the battery before proceeding with the full installation.
Front and Rear View of Motorola One 5G Ace LCD Display Assembly
Front and Rear View of Motorola One 5G Ace LCD Display Assembly

5.2. Installation Tips

  1. Power Off and Disassemble: Ensure the phone is powered off, the battery is removed, and the defective screen is carefully detached.
  2. Clean Connectors: Use rubbing alcohol or a rubber eraser to gently clean all connectors on both the phone's motherboard and the new display's flex cables. This removes any residue that could interfere with the connection.
  3. Secure Connections: When connecting the flex cables, ensure they are inserted deep enough and are seated tightly. Loose connections are a common cause of display and touch issues.
  4. Post-Connection Test: After connecting the new display but before final adhesion, temporarily re-insert the battery and power on the device. Perform display and touch tests again to confirm functionality. Power off once complete.
  5. Clean Operation Area: Before sealing the new screen, thoroughly clean the internal operation area to remove any fine particles or dust. Dust can accumulate under the camera lens or cause pressure points that damage the LCD.
  6. Final Fixation: Once all tests are successful and the area is clean, use appropriate adhesive or glue to securely fix the new screen into the phone's frame. Apply even pressure and allow sufficient curing time if using liquid adhesive.
  7. Power On: After the adhesive has set, power on your device.
Front View of Motorola One 5G Ace LCD Display
Front View of Motorola One 5G Ace LCD Display
Rear View of Motorola One 5G Ace LCD Display Assembly with Frame
Rear View of Motorola One 5G Ace LCD Display Assembly with Frame

6. Operating Instructions (Post-Installation)

Once the new display is successfully installed, your Motorola One 5G Ace should function as normal. Perform the following checks:

  • Display Quality: Verify that the screen displays images clearly, with correct colors and no visible defects.
  • Touch Responsiveness: Test the touch screen across its entire surface to ensure smooth and accurate response.
  • Sensor Functionality: Check the proximity sensor (screen turns off during calls) and ambient light sensor (auto-brightness).
  • Button Functionality: Ensure all physical buttons (power, volume) integrated with the frame are working correctly.

7. Maintenance

To prolong the life of your new display, follow these maintenance guidelines:

  • Screen Protection: Consider using a screen protector (tempered glass or film) to guard against scratches and minor impacts.
  • Cleaning: Clean the screen with a soft, lint-free cloth, preferably microfiber. For stubborn smudges, lightly dampen the cloth with water or a screen-specific cleaning solution. Avoid harsh chemicals.
  • Avoid Pressure: Do not apply excessive pressure to the screen, especially when carrying the phone in a pocket or bag.
  • Temperature Extremes: Avoid exposing your device to extreme temperatures, which can affect display performance and longevity.

8. Troubleshooting

If you encounter issues after installation, consider the following:

  • No Display/Black Screen:
    • Ensure all flex cables are securely connected. Disconnect and reconnect them.
    • Check for any bent or damaged pins on the connectors.
    • Verify the battery is properly connected and charged.
  • Touch Not Working/Unresponsive:
    • Recheck the digitizer flex cable connection.
    • Ensure there are no foreign objects or debris between the screen and the frame.
    • Perform a hard reset of the device.
  • Lines on Screen/Discoloration:
    • This often indicates a damaged flex cable or a faulty display. Recheck connections.
    • Ensure no pressure is being applied to the screen from inside the device.
  • Backlight Issues:
    • Check the display flex cable for damage.
    • Ensure the backlight connector is properly seated.

If troubleshooting steps do not resolve the issue, contact the seller or a professional repair service.

9. User Tips

  • Take Your Time: Rushing through the repair process can lead to mistakes and damage. Work slowly and methodically.
  • Organize Screws: Keep track of all screws and small parts, as they often differ in size and length. A magnetic mat or labeled containers can be very helpful.
  • Watch a Video Guide: Before starting, search for a detailed video tutorial specific to your Motorola One 5G Ace model. Visual guides can clarify complex steps.
  • Gentle Handling: Flex cables are delicate. Avoid bending them sharply or applying excessive force.
  • Cleanliness is Key: A clean workspace prevents dust and debris from getting trapped inside your phone, which can cause issues with the camera or display.

10. Warranty and Support

For warranty information and technical support, please refer to the seller's policies or contact the seller directly through the platform where the purchase was made. Keep your purchase receipt or order number handy for any inquiries.

© 2023 UbreakFixParts Store. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.