Douk Audio EQ5-TONE

Contents

Nobsound EQ5 TONE Mini Bluetooth 5-Band EQ Equalizer Audio Preamp

Model: EQ5-TONE | Brand: Douk Audio

1. Introduction

The Nobsound EQ5 TONE is a versatile mini Bluetooth 5-band EQ equalizer and audio preamp designed to enhance your audio experience. It features separate and rich frequency band controls, an adjustable VU meter, Bluetooth 5.0 input, and a bypass function for pure audio signal. Its compact size and robust design make it suitable for various audio setups.

Video: Overview of the Nobsound EQ5 TONE's features and operation.

2. Package Contents

Please check the package carefully for the following items:

  • 1 * EQ5-TONE Equalizer
  • 1 * USB cable (Type-C)
  • 1 * User Manual (This document, also available as PDF: User Manual PDF)
  • 1 * Screwdriver
  • 1 * Bluetooth Antenna
Packing list for EQ5-TONE Equalizer including the device, USB cable, Bluetooth antenna, and screwdriver.
Figure 1: EQ5-TONE Packing List and Dimensions. Includes the equalizer unit, USB-C cable, Bluetooth antenna, and a screwdriver. Dimensions are 164mm (W) x 108mm (D) x 82mm (H).

3. Product Overview

3.1 Front Panel Controls

Front panel of the EQ5-TONE with labels for VU meters, volume knob, EQ adjustment knobs, balance knob, input select switch, and EQ/Bypass switch.
Figure 2: Front Panel Layout. Features dual VU meters (L and R), a Volume knob, five EQ adjustment knobs (75Hz, 400Hz, 800Hz, 4KHz, 10KHz), a Balance adjustment knob, an AUX/Bluetooth input select switch, an EQ/Bypass select switch, and a Power switch.
  • VU Meter (L/R): Displays audio signal levels for left and right channels.
  • Volume Knob: Adjusts the overall output volume.
  • 5 Bands EQ Adjustment Knobs: Individual controls for 75Hz, 400Hz, 800Hz, 4KHz, and 10KHz frequencies.
  • Balance Adjustment Knob: Adjusts the balance between the left and right audio channels.
  • AUX / Bluetooth Input Select Switch: Toggles between AUX (wired) and Bluetooth (wireless) input modes.
  • EQ / Bypass Select Switch: Toggles between EQ processing mode and Bypass mode (audio signal passes through without EQ processing).
  • Power Switch (ON/OFF): Turns the device on or off.

3.2 Rear Panel Connections and Adjustments

Rear panel of the EQ5-TONE with labels for input/output, Bluetooth antenna, and VU meter adjustments.
Figure 3: Rear Panel Connections. Shows RCA L/R Output, RCA L/R Input, Bluetooth Antenna (ANT), DC 5V IN (USB-C power), and VU meter adjustment controls (LIGHT, SPEED, GAIN).
  • ANT: Connection point for the Bluetooth antenna.
  • OUTPUT (RCA L/R): RCA stereo audio output to an amplifier, headphone amplifier, or active speakers.
  • INPUT (RCA L/R): RCA stereo audio input from various audio sources.
  • LIGHT: Adjusts the background light intensity of the VU meters.
  • SPEED: Adjusts the pointer movement speed of the VU meters.
  • GAIN: Adjusts the sensitivity (gain) of the VU meters.
  • DC 5V IN: USB Type-C power input (requires a separate 5V power supply, ≥500mA).

4. Setup Instructions

  1. Power Connection:
    • Connect the provided USB Type-C cable to the "DC 5V IN" port on the rear panel of the EQ5-TONE.
    • Plug the other end of the USB cable into a separate 5V USB power supply (not included, ≥500mA).
    • Toggle the Power switch on the front panel to the "ON" position.
    • Note: Do not use the USB port of computers or share the power supply with audio sources to avoid common ground noise.
  2. Input Connection:
    • Wired Input (RCA / 3.5mm AUX): Connect your audio source (e.g., CD player, tablet, phone, PC) to the "INPUT" RCA ports or the 3.5mm AUX input on the rear panel.
    • Wireless Input (Bluetooth):
      1. Toggle the AUX/BT switch on the front panel to the "BT" position.
      2. Enable Bluetooth on your audio device (e.g., phone, tablet).
      3. Search for "DOUK AUDIO" in your device's Bluetooth settings and connect.
    • Note: Stereo RCA and 3.5mm AUX inputs are in parallel. To avoid signal mixing, do not connect both RCA and 3.5mm AUX inputs simultaneously.
  3. Output Connection:
    • Connect the "OUTPUT" RCA ports or the 3.5mm AUX output on the rear panel to your active speakers, amplifier, or headphone amplifier.

5. Operating Instructions

  1. Power On/Off: Use the "ON/OFF" switch on the front panel.
  2. Input Selection: Use the "AUX/BT" switch to select between wired (AUX) and wireless (Bluetooth) input.
  3. Volume Adjustment: Rotate the "VOLUME" knob on the front panel to adjust the overall sound level.
  4. Equalization (EQ) Adjustment:
    • Use the five EQ adjustment knobs (75Hz, 400Hz, 800Hz, 4KHz, 10KHz) to fine-tune specific frequency bands according to your preference.
    • Toggle the "EQ/PASS" switch to "EQ" to enable equalization.
    Illustration of 5-band EQ adjustment knobs for 75Hz, 400Hz, 800Hz, 4KHz, and 10KHz.
    Figure 4: 5-Band EQ Adjustment. Adjust individual frequency bands for customized sound.
  5. Balance Adjustment: Rotate the "BALANCE" knob to adjust the left/right channel balance. This helps compensate for sound field positioning issues.
  6. Bypass Function:
    • Toggle the "EQ/PASS" switch to "PASS" to bypass the EQ preamplification. The audio signal will output directly from input to output without any processing, preserving the original sound.
    • Note: In bypass mode, the VU meters will not function if the signal hasn't been preamplified.
    Image showing the EQ/PASS switch and Balance knob, illustrating the bypass design.
    Figure 5: Bypass Design and Balance Adjustment. The EQ/PASS switch allows for direct signal pass-through.
  7. VU Meter Adjustment: Use the small adjustment controls (LIGHT, SPEED, GAIN) on the rear panel with the provided screwdriver to customize the VU meter's appearance and responsiveness.
    Close-up of the VU meter on the EQ5-TONE.
    Figure 6: Adjustable VU Meter. Customize background light, pointer speed, and gain for visual effect.

6. User Tips

  • For optimal sound quality and to avoid noise, always use a dedicated, high-quality 5V USB power supply for the EQ5-TONE. Avoid sharing power with your audio source or computer USB ports.
  • When using wired inputs, ensure only one input (RCA or 3.5mm AUX) is connected at a time to prevent signal mixing.
  • Experiment with the EQ bands to tailor the sound to your specific speakers and listening environment.
  • The VU meters add a dynamic visual element; adjust their light, speed, and gain to match your aesthetic preference.

7. Troubleshooting (FAQ)

Q: Why is there noise after the sound passes through EQ Tone preamp?
A: This can often be caused by a poor quality USB power supply.
  • Change to a better USB power supply. A poor quality USB power supply can have ripple and cause great interference.
  • The EQ5-TONE needs an independent USB power supply. Try not to share a USB power supply with the player or audio source.
Q: The rear 3.5mm input is independent of the RCA input, can it be switched?
A: Not supported. The two sets of input (RCA and 3.5mm Jack) and output are connected in parallel. This means you only need to use one of the groups at the same time. They cannot be switched independently as separate inputs.

8. Specifications

FeatureSpecification
BrandDouk Audio
ModelEQ5-TONE
Audio InputBluetooth / Stereo RCA / 3.5mm AUX
Audio OutputStereo RCA / 3.5mm AUX
EQ Bands75Hz / 400Hz / 800Hz / 4KHz / 10KHz
VU Meter SupportLIGHT / SPEED / GAIN adjustment
Bypass FunctionSupported
Balance AdjustmentL/R channel balance adjustment
Input Impedance50KΩ
Output Impedance15Ω
Frequency Response5Hz-20KHz
THD0.003%@1 KHz
Working VoltageDC 5V (≥500mA)
Power InterfaceUSB (Type-C)
Diameter of VU Meter45mm
Dimensions (W*D*H)164*108*82mm / 6.46*4.25*3.23in
Net Weight730g / 1.61lb
Package Weight1.0kg / 2.20lb

9. Maintenance

  • Keep the device clean and dry. Avoid exposing it to moisture, dust, or extreme temperatures.
  • Use a soft, dry cloth to clean the exterior. Do not use harsh chemicals or abrasive cleaners.
  • Ensure proper ventilation around the unit to prevent overheating.
  • When not in use for extended periods, disconnect the power supply.

10. Warranty and Support

This product comes with a 2-year warranty, as indicated on the product listing.

Contact Information:

  • Website: www.doukaudio.com
  • Email: nobsound@doukaudio.com
  • WeChat/Whatsapp: +86-17704028602
  • Address: Room 1329, Wang Cheng Building, Long Guan East Road, Long Hua District, Shen Zhen, Guang Dong, China, 518000
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.