SAGE LU MEI SP328E

Contents

SP328E Group&Sync SPI RGB LED Controller User Manual

Model: SP328E | Brand: SAGE LU MEI

1. Introduction

The SP328E is a versatile Group&Sync SPI RGB LED Controller designed for controlling WS2811, WS2812B, and other SPI RGB pixel LED strips. It features Bluetooth control, advanced Mesh networking technology for flexible device grouping, and unified management. This controller allows for ultra-long-distance lighting effect frame synchronization, making it an ideal device for smart wireless lighting control in various environments.

SP328E Controller with phone app interface
Figure 1: SP328E Controller and mobile application interface, showing customizable colors with visual preview.

2. Safety & Warnings

Read all instructions before use to ensure safety and prevent damage.

  • Warning: Keep the device and its cord out of reach of children under 3 years old.
  • Ensure the power supply voltage matches the controller's specifications (DC 5-24V).
  • Do not expose the device to moisture or extreme temperatures.
  • Avoid disassembling or modifying the controller, as this may void the warranty and pose safety risks.

3. Product Overview

The SP328E controller is designed for ease of use and robust performance. Key components and features include:

  • BT Mesh Networking Technology: Enables flexible device grouping and unified management. Ensures stability even if some devices fail.
  • Wide Wireless Communication Range: Up to 30 meters between any two devices in a Mesh network. Synchronization signal can reach up to 260 meters with RF amplification.
  • BanlanX App: Scene-based UI design for visual previews, personalized scene favorites, dynamic effects, versatile DIY options, and lively music effects.
  • OTA Updates: Supports Over-The-Air updates to ensure the device stays current with the latest features and improvements.
Detailed view of SP328E controller ports
Figure 2: SP328E Controller Port Layout. Features include LED light Interface (GND, DAT, VCC), ON/OFF switch, Indicator light, MIC, and DC Power Jack (Working Voltage: DC5V~24V).
Dimensions and key specifications of the SP328E controller
Figure 3: SP328E Controller Dimensions and Key Specifications. Length: 118mm (4.65in), Width: 45mm (1.77in), Height: 15mm (0.59in). Grouping Type: BLE Mesh, Frame Sync Range: 260M, Max Pixels: 900.

4. Specifications

Attribute Value
Model Number SP328E
Features Group&Sync SPI RGB LED Controller
Connection Mode Bluetooth
Certification CE, ROHS
Voltage 5-24V DC
Material Plastic
Wattage 1W
Power Source DC
Remote Distance 30m (device communication) / 260m (frame sync)
Applicable Lights SPI RGB Light (WS2811, WS2812B, etc.)
Controlled Method APP (BanlanX)
Max Pixels 900
Grouping Type BLE Mesh

5. Setup Instructions

  1. Preparation: Remove all protective films from the device.
  2. Connect LED Strip: Connect your compatible SPI RGB LED strip to the controller's LED light interface (GND, DAT, VCC). Ensure correct polarity and pin assignments for your specific LED strip.
  3. Power Connection: Connect the provided USB cable to the DC Power Jack on the controller and then to a certified 5V-24V power adapter. The controller supports a wide voltage range, but ensure your power supply matches the requirements of your LED strip.
  4. Power On: Press and hold the power button for 3 seconds to turn on the controller. The indicator light should illuminate.
  5. App Download: Download the "BanlanX" app from your smartphone's app store (available for Android and iOS).
  6. Bluetooth Pairing: Open the BanlanX app and follow the on-screen instructions to discover and pair with your SP328E controller via Bluetooth.
BT MESH Networking application scenarios
Figure 4: BT MESH Networking for seamless connection and smart control in various application scenarios like courtyards, squares, and markets.

6. Operating Instructions

6.1 Basic Control

  • Power On/Off: Press and hold the power button for 3 seconds.
  • Cycle Modes: Short press the power button to cycle through pre-programmed functions/modes.

6.2 App Control (BanlanX)

The BanlanX app provides comprehensive control over your LED strips:

  • Visual Scene-Based UI: Enjoy real-time visual previews of lighting effects.
  • Dynamic Effects: Choose from up to 30 dynamic effects to create immersive scenes.
  • Music Effects: Activate sound-responsive music mode to synchronize lights with your audio.
  • DIY Options: Create and customize your own lighting effects with rich customization modes.
  • Favorites: Save your preferred light effects for quick access and easy recall.
  • Grouping & Synchronization: Utilize BT Mesh networking to group multiple SP328E controllers for synchronized lighting across a wide area (up to 200 devices per group, spanning 10 groups).
Visual scene-based UI with real-time preview on a phone
Figure 5: Visual scene-based UI in the BanlanX app, offering real-time visual preview of lighting effects.
Dynamic, Music, and DIY modes examples
Figure 6: Examples of Dynamic, Music, and DIY modes available through the app for varied lighting experiences.
Master/slave controller setup for multi-device synchronization
Figure 7: Master Control Linkage and Multi-Device Synchronization. The BLE Mesh network supports up to 200 devices per group, with devices able to span across 10 groups.

7. User Tips

  • For optimal performance, ensure your smartphone's Bluetooth is enabled and within range of the controller.
  • Regularly check the BanlanX app for available OTA updates to access new features and improvements.
  • When setting up multiple controllers, plan your Mesh network layout to maximize synchronization range and reliability.
  • Experiment with the DIY modes to create unique lighting scenes tailored to your preferences.

8. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the controller. Do not use liquid cleaners or abrasive materials.
  • Storage: Store the controller in a cool, dry place away from direct sunlight and extreme temperatures when not in use for extended periods.
  • Software Updates: Keep the BanlanX app updated to ensure the controller's firmware is current. The app will notify you of available OTA updates.

9. Troubleshooting

  • Controller not powering on:
    • Ensure the power adapter is correctly connected and providing 5-24V DC.
    • Check the power button; press and hold for 3 seconds.
  • LED strip not lighting up:
    • Verify the LED strip is correctly connected to the controller (GND, DAT, VCC).
    • Ensure the LED strip is compatible with SPI RGB protocols (e.g., WS2811, WS2812B).
    • Check the power supply for the LED strip itself, if separate.
  • Cannot connect via Bluetooth/App:
    • Make sure Bluetooth is enabled on your smartphone.
    • Ensure the controller is powered on and within Bluetooth range (approx. 30m).
    • Restart the BanlanX app and try pairing again.
    • If issues persist, try restarting your smartphone and the controller.
  • Lights not synchronizing in a Mesh network:
    • Ensure all controllers are within the effective communication range of each other (up to 30m between nodes).
    • Check for any physical obstructions that might interfere with the RF signal.
    • Verify that all controllers are properly configured within the BanlanX app for grouping and synchronization.

10. Warranty & Support

For technical support or warranty inquiries, please contact the manufacturer or their authorized representative:

  • Manufacturer: Shenzhen Shengluomei Technology Co., Ltd.
  • Address: No. 205 No. 6, Lane 2, Wuhiro Community, Sakata Street, Longgang District, Shenzhen City, Guangdong Province, Mainland China
  • Phone: +86-15914360896
  • Email: 821880792@qq.com
  • EU Authorized Representative: Apex CE Specialists GmbH
  • EU Address: Grafenberger Allee 277, 40237 Düsseldorf, DE
  • EU Phone: +49-1776995991
  • EU Email: Info@apex-ce.de

A detailed user manual in PDF format can be found here.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.