1. Introduction
Thank you for choosing the Alloet 4G LTE Portable WiFi Router H806. This device is designed to provide high-speed internet access on the go, acting as a WiFi repeater, 4G router, and network expander. With its compact design and powerful features, you can share your 3G/4G internet connection with up to 10 users simultaneously.
2. Package Contents
Please check the box for the following items:
- 1 x Alloet 4G LTE Portable WiFi Router (Model H806)
- 1 x Charging Cable (USB)
- 1 x User Manual
- 1 x 2100 mAh Lithium Battery
3. Specifications
| Feature | Description |
|---|---|
| Model | H806 |
| 4G LTE Frequency Band | B1/B3/B5/B40 (Southeast Asia, Middle East, Africa) |
| 3G UMTS WCDMA | B1/B8 (Europe, Asia) |
| Max Speed | Download 150Mbps, Upload 50Mbps |
| WiFi Support | 802.11 b/g/n |
| Number of Sharing Users | Up to 10 users |
| Battery | 2100 mAh Lithium Battery |
| Standby Time | Over 50 hours |
| Continuous Work Time | Up to 6 hours |
| Antenna | Built-in |
| Input Voltage | 100V~240V |
| Output Voltage | 5V DC±10% |
| Output Current | 1.0A |
| Language | Chinese and English |
| Dimensions | 98mm x 59mm x 15mm |
4. Device Setup
Follow these steps to set up your Alloet 4G LTE Portable WiFi Router:
- Open the Back Cover: Locate the notch on the side of the router and carefully pry open the back cover.
- Insert SIM Card: Insert your activated 3G/4G SIM card into the designated SIM card slot. Ensure the SIM card is oriented correctly as shown in the diagram below.
- Insert Battery: Place the provided 2100 mAh lithium battery into the battery compartment, ensuring the contacts align properly.
- Close the Back Cover: Replace the back cover, pressing firmly until it clicks into place.
- Power On: Press and hold the 'BOOT key' (power button) located on the side of the device for a few seconds until the indicator lights illuminate.
Default Wi-Fi Information (located on the sticker inside the device):
- Model: H806 (or MF800 as seen in some units)
- IP: 192.168.100.1
- User: admin
- Password: admin
- SSID: 4G-MIFI-BBD
- WIFI KEY: 1234567890
For a visual guide on setup, please refer to the video below:
5. Operating Instructions
- Power On: Ensure the device is powered on by pressing and holding the 'BOOT key' until the indicator lights are active.
- Connect to Wi-Fi: On your smartphone, tablet, or laptop, search for available Wi-Fi networks. Select the network name (SSID) displayed on the sticker inside your router (e.g., "4G-MIFI-BBD").
- Enter Password: When prompted, enter the Wi-Fi key (password) found on the sticker (e.g., "1234567890").
- Access Internet: Once connected, your device should have internet access through the 4G LTE router.
6. LED Indicators
The router features several LED indicators on its front panel to show the device's status:
- Signal Indicator: Displays the strength of the 4G/3G cellular signal. More bars indicate a stronger signal.
- Wi-Fi Indicator: Lit when Wi-Fi is active and broadcasting.
- Battery Indicator: Shows the current battery level. May change color or blink to indicate low battery or charging status.
- Message Indicator: May indicate new SMS messages received on the SIM card.
7. Maintenance
- Cleaning: Use a soft, dry cloth to clean the device. Do not use liquid cleaners or aerosols.
- Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, avoid fully discharging the battery frequently. If storing for extended periods, charge the battery to about 50% and recharge every few months.
- Firmware Updates: Check the manufacturer's website periodically for any available firmware updates to ensure optimal performance and security.
8. Troubleshooting
- No Internet Connection:
- Ensure your SIM card is active and has a data plan.
- Check the signal indicator on the router. If there's no signal, try moving to a different location.
- Verify that the Wi-Fi password entered on your connecting device is correct.
- Restart both the router and your connecting device.
- Slow Speed:
- Check the signal strength. A weak signal can lead to slower speeds.
- Reduce the number of connected devices.
- Ensure there are no obstructions between the router and your device.
- Device Not Powering On:
- Ensure the battery is correctly inserted and charged.
- Connect the router to a power source using the charging cable to see if it powers on or charges.
9. User Tips
- Check Frequency Bands: Before purchasing or using in a new region, always verify that the router's supported 4G LTE and 3G UMTS WCDMA frequency bands match those of your local network operator.
- Keep Default Credentials Safe: The default Wi-Fi SSID and password, along with the admin login, are crucial for initial setup and troubleshooting. Keep the sticker or a note of these details in a safe place.
- Optimal Placement: For the best signal and speed, place the router in an open area, away from walls, large metal objects, and other electronic devices that might cause interference.
- Battery Management: For extended use, consider carrying a power bank to recharge the router, especially during long trips.
10. Safety Information
- Do not expose the device to extreme temperatures, direct sunlight, or high humidity.
- Avoid dropping or subjecting the device to strong impacts.
- Do not attempt to disassemble or modify the device. This will void the warranty and may cause damage.
- Use only the provided or approved charging cable and battery.
- Keep the device away from water and other liquids.
11. Warranty and Support
For specific warranty information, technical support, or service inquiries, please refer to the documentation provided with your purchase or contact the seller directly. Keep your proof of purchase for warranty claims.
