1. Introduction
Thank you for choosing the ULTIMEA Poseidon D60 5.1 Channel Dolby Atmos Soundbar. This manual provides essential information for setting up, operating, and maintaining your home theater system. Please read it carefully before use and keep it for future reference.
For additional guidance, including video tutorials and troubleshooting, please visit the ULTIMEA website or contact support at support@ultimea.com.
Product demonstration video showcasing the 5.1 channel Dolby Atmos sound system.
2. Safety Instructions
Please read and save this user manual for future reference. Do not make unauthorized alterations to the product, as this may compromise safety, regulatory compliance, system performance, and void the warranty.
- Avoid dropping the device.
- Do not disassemble the product.
- Do not submerge the device in water.
- Avoid extreme temperatures.
- Do not use the device outdoors during thunderstorms.
- Use original or certified cables only.
- Do not place dangerous items (e.g., liquid-filled objects, lit candles) on top of this device.
- Clean with a dry, soft, lint-free cloth. Do not use any corrosive cleaner or oil.
- To avoid hearing damage, do not listen for extended periods at high volume.
- Do not expose the batteries to extreme heat sources such as direct sunlight or open flames.
- The ideal operating temperature for this product and its accessories is between 41°F/5°C and 95°F/35°C.
- The adapter should be installed near the device and be easily accessible.
- Do not use this product in environments of extreme heat or cold. Never expose this device to strong sunshine or wet environments.
3. Accessories List
Please check that all the following items are included in your package:
- 1x Soundbar
- 1x Subwoofer
- 2x Surround Speakers
- 1x Power Adaptor
- 1x Subwoofer Power Cable
- 1x Stereo 3.5mm to RCA Audio Cable
- 1x Stereo RCA to RCA Cable (6m)
- 1x HDMI Cable
- 1x Digital Optical Cable
- 1x Remote Control
- 1x Wall Mounted Kit
- 1x Wall Bracket
- 4x Mounting Screws for Speakers
- 1x User Manual (PDF available online)

Main components of the ULTIMEA Poseidon D60 system.
4. Controls
4.1 Soundbar Control Panel
The control panel is located on the top of the soundbar.
- Power Button (★): Press to power the soundbar on or off.
- Input Mode Button (★): Press to switch between input channels: eARC, Bluetooth (BT), Optical (OPT), Auxiliary (AUX), USB.
- Bluetooth Button (★): Press to switch to BT channel and enter pairing mode.
- Volume Down Button (-): Decrease the volume.
- Volume Up Button (+): Increase the volume.
4.2 Remote Control
The remote control provides comprehensive control over your soundbar system.

Remote control layout and functions.
- Power Button (★): Power on/off.
- eARC Button (★): Switch to HDMI eARC channel.
- Bluetooth Button (★): Switch to BT channel and enter pairing mode. Hold for 3 seconds to disconnect current device and connect to a new device manually on your mobile phone/PC/TV (BT ID: Poseidon D60).
- OPT Button (★): Switch to Optical channel.
- AUX Button (★): Switch to AUX channel.
- EQ Button (★): Switch among Movie, Dialogue, Music modes. Display shows: "E901", "E902", "E903".
- USB Button (★): Switch to USB channel.
- Volume Up Button (+): Increase volume.
- Volume Down Button (-): Decrease volume.
- Previous Button (★): Skip to previous track (BT and USB modes).
- Next Button (★): Skip to next track (BT and USB modes).
- Play/Pause Button (★): Play/pause (BT and USB modes). In USB mode, hold for 3 seconds to switch between single loop playback and list loop playback.
- Surround Button (★): Adjust surround sound level. Display shows: "S-1", "S-0", "S-1".
- BASSMX Button (★): Adjust bass level. Display shows: "bS-1", "bS0", "bS1".
- Mute Button (★): Mute/recover volume.
5. Setup and Connection
5.1 Connecting to TV via eARC / ARC
Your TV's HDMI port needs to support eARC to transmit the Dolby Atmos audio format to your Soundbar.
- Connect one end of the HDMI cable to the eARC/ARC port on the back of your TV.
- Connect the other end to the eARC port of the soundbar.
- Press the "eARC" button on the remote control to select "eARC" input.

HDMI eARC connection for highest quality audio transmission.
Note on Audio Output Settings:
- For Dolby Atmos content: Set the audio output on your TV to Pass Through (TV Settings > Home > Settings > Sound > Digital Audio Output > Pass Through).
- For DTS content: Set the audio output on your TV to PCM (TV Settings > Home > Settings > Sound > Digital Audio Output > PCM).
HDMI IN vs. HDMI ARC vs. HDMI eARC:
- HDMI IN: Standard input for audio/video, no ARC/eARC functionality.
- HDMI ARC: Supports two-way communication for audio between TV and sound system.
- HDMI eARC: An updated version of HDMI ARC, supporting higher quality audio formats like Dolby Atmos and DTS:X.
Ensure the "CEC" function is enabled on your TV. When eARC/ARC is connected, your TV remote can control the soundbar and TV simultaneously for power on/off and volume adjustment.
5.2 Connecting to TV via Optical / AUX
Option 1: Optical Connection
- Ensure your TV's port is labeled OPTICAL OUT. Connect both ends of the optical cable to the OPTICAL ports on your TV and soundbar.
- Ensure the optical plug is inserted correctly. Do not force the plug or insert it upside down to avoid damage.
Option 2: AUX Connection
- Connect the 3.5mm to 3.5mm Audio Cable to your TV's AUDIO OUT port.
- The soundbar does not support AUDIO IN port on TV.
Note: If there is no sound in Optical mode, try setting the TV audio output to PCM (TV Settings > Home > Settings > Sound > Digital Audio Output > PCM).
5.3 Connecting via Bluetooth
- Press the Bluetooth button (★) on the soundbar or remote control to enter Bluetooth pairing mode.
- Go to the Bluetooth settings on your phone/device, find and select "Poseidon D60" to connect to the soundbar.
Note: If the device is already in Bluetooth mode and connected, press and hold the Bluetooth button (★) for 3 seconds to disconnect the current device and manually connect to a new device.
5.4 Connecting Subwoofer and Surround Speakers

Rear view of the soundbar with various input ports.
- Use the 6m RCA-RCA cables to connect the subwoofer and surround speakers. Match the same color interfaces on the surround speakers with the corresponding ones on the subwoofer.
- Use the power cable to connect your subwoofer to a power port.
The subwoofer is pre-paired with the soundbar by ULTIMEA. However, if there is no sound from the subwoofer, you may need to re-pair them:
- Press and hold the "BASSMX" button on the remote control for 5 seconds. The display will show "Sub" flashing.
- Press and hold the ON/OFF button on the subwoofer for 5 seconds. The white LED will flash rapidly.
- The white LED will become solid when the subwoofer is successfully paired.
6. Placement Options
For an optimal listening experience, choose one of the following placement options based on your home environment. The soundbar and surround speakers should be placed at or near ear level.
6.1 Full 360° Surround (Better Surround)

Recommended placement for a full 360° surround experience.
6.2 Front Surround

Alternative placement for front surround sound.
7. Wall Mount Installation
The soundbar can be mounted on the wall. The wall-mounted surround speakers follow the same configuration as shown in the placement options.

Wall mount installation guide for the soundbar.
8. Operating Modes and Features
8.1 EQ Modes
Use the EQ button on the remote to switch between different sound modes:
- Movie Mode: Optimized for cinematic experiences.
- Dialogue Mode: Enhances vocal clarity for TV shows and podcasts.
- Music Mode: Balanced sound for music playback.
8.2 Surround Sound Adjustment
The Poseidon D60 features two adjustable surround speakers for true surround sound. Use the "Surround" button on the remote to adjust the surround sound level.

Adjustable surround level for personalized audio.
8.3 BassMX Technology
The ULTIMEA Poseidon D60 incorporates BassMX technology to boost low frequencies, providing a powerful and adjustable bass experience. Use the "BASSMX" button on the remote to fine-tune the bass level.

Subwoofer with BassMX for powerful bass.
8.4 App Control
The ULTIMEA Poseidon D60 can be controlled via a dedicated app, allowing for intelligent sound control and customization.

Intelligent App Control with various EQ settings.
9. Specifications
| Feature | Specification |
|---|---|
| Model Number | U2520 |
| Power Supply | AC 100-240V, ~50/60Hz |
| Soundbar Drivers | 2.25" x 3 (Soundbar) + 2.25" x 2 (Surround Speaker) + 5.25" (Subwoofer) |
| Frequency Range | 40Hz - 18kHz |
| Max Sound Pressure Level | >103dB |
| Signal-to-Noise Ratio | ≥ 87dB |
| Distortion | <1% |
| Static Noise | 38dB |
| Standby Power | <0.5W |
| Operating Temperature | 0°C - 45°C / 32°F - 113°F |
| Recommended Uses | For surround sound systems, Home theatre |
| Speaker Type | Soundbar |
| Mounting Type | Tabletop Mount |
| Connectivity Technology | HDMI, Bluetooth, Optical, AUX, USB |
| Number of Loudspeaker Enclosure | 2 |
| Power Source | AC |
| Remote Control | Yes (IR Signal) |
| Dolby Atmos | Yes |
| Speaker Channels | 5.1 |
| Listening Modes (EQ) | Movie, Dialogue, Music |
9.1 Dimensions and Weight
| Component | Dimensions (W x H x D) | Weight |
|---|---|---|
| Soundbar | 400 x 70 x 90 mm (15.7" x 2.8" x 3.5") | |
| Subwoofer | 155 x 244 x 215 mm (6.1" x 9.6" x 8.5") | |
| Surround Speaker | 135 x 70 x 90 mm (5.3" x 2.8" x 3.5") | |
| Packaging | 335 x 442 x 192 mm (13.1" x 17.4" x 7.5") | |
| Net Weight | 5.3 kg / 11.68 lbs | |
| Gross Weight | 6.8 kg / 14.99 lbs |
10. User Tips
- Bluetooth Connectivity: Yes, the ULTIMEA Poseidon D60 supports Bluetooth connectivity. You can easily pair your mobile phone, PC, or TV to the soundbar via Bluetooth. If already connected, hold the Bluetooth button for 3 seconds to disconnect and pair a new device.
- Optimal Sound: For the best Dolby Atmos experience, ensure your TV's HDMI port supports eARC and set the audio output to 'Pass Through'. For DTS content, use 'PCM' output.
- Surround Speaker Placement: Experiment with the placement of the two adjustable surround speakers to find the optimal setup for your room and personal preference.
11. Warranty and Support
A 1-year manufacturer's warranty is provided with this product. The seller also offers free technical support and spare parts.
For any questions or concerns, please reach out to the ULTIMEA support team:
- Email: support@ultimea.com
- US Support: +1 888-598-8875 (Mon-Fri 9am-5pm PST)
- EU Support: +49 89-628-25828 (Mon-Fri 9am-5pm CET)
For the complete user manual in PDF format, please refer to the official document: ULTIMEA Poseidon D60 User Manual (PDF).
12. Regulatory Compliance
12.1 FCC Regulatory Compliance
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
12.2 ISED Warnings
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
This equipment complies with IC exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with a minimum distance of 20cm between the radiator & body.
13. Proper Disposal Instructions
This mark on the product or its packaging indicates that this product should not be disposed of with other household waste at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling.
Business users should contact their suppliers and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.