ASAIR AGP11

Contents

ASAIR AGP11 Series Piezoresistive Vacuum Gauge User Manual

Model: AGP11 | Brand: ASAIR

1. Introduction

The ASAIR AGP11 Series Piezoresistive Vacuum Gauge is a high-precision instrument designed for accurate vacuum measurement. Utilizing advanced piezoresistive technology, it offers exceptional corrosion resistance, high precision, and long-term stability, making it suitable for a wide range of industrial and scientific applications. This manual provides essential information for the safe and effective installation, operation, and maintenance of your AGP11 vacuum gauge.

ASAIR AGP11 Piezoresistive Vacuum Gauge with key features
Figure 1: ASAIR AGP11 Series Piezoresistive Vacuum Gauge highlighting accuracy, range, and output options.

2. Safety Information

Please read and understand all safety instructions before installing, operating, or maintaining the AGP11 vacuum gauge. Failure to follow these instructions may result in personal injury or damage to the equipment.

  • Installation should only be performed by qualified personnel familiar with vacuum systems and electrical wiring.
  • Ensure the power supply voltage matches the specifications of the device (24V DC).
  • Do not exceed the specified operating temperature and pressure ranges.
  • Always disconnect power before performing any wiring or maintenance.
  • Handle the vacuum gauge with care to avoid damage to the sensor or connections.
  • Ensure proper grounding to prevent electrical hazards.

3. Product Overview

The AGP11 series vacuum gauge is designed for robust performance in demanding environments. Key features include:

  • High Precision: Accuracy of ±0.5% FS (Full Scale).
  • Wide Measurement Range: Available in 0-100 Torr and 0-1000 Torr variants.
  • Multiple Output Options: Supports 4-20mA, 0-10V, and 1-5V analog output signals.
  • Gas Type Independence: Measurement is not affected by the type of gas.
  • Corrosion Resistance: Constructed with 316L stainless steel and ceramic materials exposed to vacuum.
  • Optional Digital Display: Some models feature an integrated digital display for local reading.
  • Standardized Connection: Equipped with a KF16 flange for easy integration into vacuum systems.

Typical Applications:

  • Semiconductor manufacturing
  • Vacuum coating processes
  • Solar energy production
  • Metallurgy and material science
  • Petrochemical industry
  • Medical equipment
  • Aerospace research
  • Scientific research and development
  • Environmental protection systems

4. Specifications

The following table details the technical specifications for the ASAIR AGP11 Series Piezoresistive Vacuum Gauge:

ASAIR AGP11 Product Parameters and Dimensions
Figure 2: Detailed product parameters, dimensions, and model selection table for AGP11 series.
Table 1: AGP11 Series Technical Specifications
ParameterSpecification
ModelAGP11 Series
Measurement Range0-100 Torr, 0-1000 Torr
Accuracy±0.5% FS
Output Signal4-20mA, 0-10V, 1-5V (model dependent)
Power Supply24V DC
Process ConnectionKF16 (standard), KF25, KF40, 1/4" NPT, 1/2" NPT, 1/8" NPT, 1/4" VCR, 1/2" VCR, 1/4" Swagelok, 1/2" Swagelok (various options available)
Materials Exposed to Vacuum316L Stainless Steel, Ceramic
Operating Temperature0°C to 50°C
Storage Temperature-20°C to 70°C
WeightApprox. 0.5 kg (depending on configuration)

For detailed dimensions, please refer to the diagrams in Figure 2.

5. Setup and Installation

Proper installation is crucial for the accurate and reliable operation of the AGP11 vacuum gauge.

5.1 Mechanical Installation

  • The AGP11 series features a standardized KF16 flange connection for easy integration. Ensure the mating flange on your vacuum system is clean and free of debris.
  • Use appropriate O-rings and clamps to create a leak-tight seal.
  • Mount the gauge in a position that minimizes vibration and is easily accessible for wiring and observation.
  • Avoid mounting the gauge directly above sources of heat or in areas with extreme temperature fluctuations.

5.2 Electrical Wiring

The AGP11 gauge requires a 24V DC power supply. Refer to the wiring diagrams below and the pin definitions for correct connection. Always ensure power is disconnected before wiring.

ASAIR AGP11 Wiring Diagram
Figure 3: Wiring diagrams for 4-20mA and 0-10V/1-5V output models (refer to "Interface Definition" section of the image).
Table 2: Pin Definitions
Pin No.Function
1Power+ (24V DC)
2Power- (GND)
3Signal+ (Current/Voltage Output)
4Signal- (Current/Voltage Output)

Connect the plug to the corresponding socket and tighten the screw securely. Ensure all connections are firm and correctly polarized.

6. Operation

Once installed and wired correctly, the AGP11 vacuum gauge is ready for operation.

  • Power On: Apply 24V DC power to the gauge.
  • Reading Display (if applicable): For models with a digital display, the current vacuum pressure will be shown on the LED screen. The display typically shows the pressure in Torr.
  • Analog Output: The gauge will continuously provide an analog output signal (4-20mA, 0-10V, or 1-5V) corresponding to the measured vacuum pressure. This signal can be connected to a PLC, data acquisition system, or other control devices.
  • Display Controls (if applicable): Models with a display may have 'up' and 'down' buttons for adjusting display settings or viewing different parameters. Consult the specific model's detailed instructions for advanced display functions.
ASAIR AGP11 Vacuum Gauge with Digital Display
Figure 4: Front view of AGP11 with digital display showing a reading of "100".

7. Maintenance

The AGP11 vacuum gauge is designed for low maintenance due to its robust construction and corrosion-resistant materials. However, regular checks can ensure optimal performance and longevity.

  • Cleaning: Periodically inspect the vacuum connection port for any contamination. If cleaning is necessary, use appropriate vacuum-compatible cleaning agents and procedures. Avoid harsh chemicals or abrasive materials that could damage the sensor or sealing surfaces.
  • Connection Integrity: Regularly check all electrical and vacuum connections for tightness and signs of wear. Loose connections can lead to inaccurate readings or system leaks.
  • Calibration: While the AGP11 offers high stability, periodic calibration by a qualified technician using a certified reference standard is recommended to maintain measurement accuracy over time, especially in critical applications.
  • Environmental Conditions: Ensure the operating environment remains within the specified temperature and humidity ranges to prevent premature aging or malfunction.

8. Troubleshooting

This section provides guidance for common issues encountered with the AGP11 vacuum gauge. For problems not listed here, please contact technical support.

Table 3: Troubleshooting Guide
ProblemPossible CauseSolution
No display/No outputNo power or incorrect wiringCheck 24V DC power supply and verify wiring according to Section 5.2.
Inaccurate readingsContamination, leak in vacuum system, or gauge malfunctionCheck for leaks in the vacuum system. Inspect gauge for contamination. Consider professional calibration if issues persist.
Fluctuating readingsSystem instability, electrical noise, or vibrationEnsure stable vacuum conditions. Check for sources of electrical noise or excessive vibration near the gauge.
Gauge not responding to pressure changesSensor damage or internal faultContact technical support for diagnosis and potential repair or replacement.

9. User Tips

  • The AGP11's measurement is not affected by gas type, simplifying its use across various applications without needing gas-specific calibration factors.
  • Its compact and robust design facilitates easy installation and convenient disassembly, contributing to reduced maintenance efforts.
  • Consider the "screenless" models for applications where local visual indication is not required, relying solely on the analog output for system integration.
  • For critical applications, leverage the multiple output options (4-20mA, 0-10V, 1-5V) to integrate seamlessly with your existing control systems.

10. Warranty and Support

ASAIR (Guangzhou Aosong Electronic Co., Ltd.) is committed to providing high-quality products and excellent customer service.

  • Warranty: The AGP11 Series Piezoresistive Vacuum Gauge comes with a 1-year product warranty from the date of purchase.
  • Technical Support: For any technical inquiries, installation assistance, or troubleshooting guidance, please contact ASAIR's official support team.
  • Quality Assurance: Product quality certificates are available upon request.
  • Customization: Customized services, including cable length, PCB changes, OEM, and ODM, are available. Please contact support for details.

Contact Information:

For support, please email: support@aosong.com

ASAIR Company Profile, Certifications, and FAQ
Figure 5: ASAIR company information, certifications, and frequently asked questions.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.