1. Introduction
The Douk Audio MC5-BX is a compact, ultra low-noise 4-channel audio mixer designed for home, studio, and bar recording. It features 4 groups of 3.5mm inputs and 1 group of 3.5mm AUX output, capable of mixing signals from various sources such as CD players, instruments, portable recording devices, and video playback devices.

Figure 1: Douk Audio MC5-BX Audio Mixer Overview
2. Features
- Two Working Modes: The MC5-BX supports both Active and Passive modes to suit different requirements.
- Active Mode: Requires an independent DC 5V (≥0.5A) USB power supply. A built-in audio amplifier chip works to amplify the mixed audio signal, providing a larger power output.
- Passive Mode: No external power is required. In this mode, the MC5-BX operates in a pure resistance attenuation state, and the output audio signal will be slightly attenuated.
- Independent Volume Control: Equipped with one main output volume knob and four independent input volume knobs, allowing precise control over the input level of each of the 4 groups without interference.
- High Sonic Quality: Designed to deliver high sonic quality even at maximum output level.
- Compact and Durable Design: Mini size with an exquisite appearance. The metal casing provides better shielding performance. Its flexible circuit design ensures efficient mixing functions without compromising sound quality. The compact design makes it highly portable and convenient for use anytime, anywhere.
3. Product Components

Figure 2: Top Panel Controls and Indicators
- DC 5V Input: Type-C USB port for power supply in Active mode.
- IN-1, IN-2, IN-3, IN-4: Four 3.5mm AUX input jacks for connecting audio sources.
- OUT: Single 3.5mm AUX output jack for connecting to output devices.
- Power ON/OFF Switch: Toggles the power of the unit.
- Power Indicator: LED light indicating power status.
- Input 1, 2, 3, 4 Volume Knobs: Individual controls for the volume of each input channel.
- Output Volume Knob (VOL): Main control for the overall output volume.
- Active/Passive Mode Switch (IC/PASS): Selects between Active (IC) and Passive (PASS) operating modes.
4. Setup Instructions
4.1. Power Supply
- For Active Mode: Connect an independent DC 5V (≥0.5A) USB power supply to the Type-C USB port. It is crucial NOT to share the power supply with other audio devices to prevent common ground noise. A DC 5V power adapter is not included and must be prepared separately.
- For Passive Mode: No external power is required.
4.2. Audio Connections
- Connect your audio sources (e.g., CD players, instruments, phones, computers, Xbox, CD players) to the IN-1, IN-2, IN-3, IN-4 3.5mm AUX input jacks.
- Connect your output device (e.g., headphones, amplifier, mixer) to the OUT 3.5mm AUX output jack.

Figure 3: Active Mode Connection Diagram

Figure 4: Passive Mode Connection Diagram
4.3. Important Notes
- The MC5-BX only supports standard audio signals (e.g., from CD/DVD players, phones). Do not connect phono turntables or microphones directly, as this may result in poor audio quality or noise.
- Keep wireless devices such as Wi-Fi routers or mobile phones away from the MC5-BX to prevent potential noise interference.
5. Operating Instructions
5.1. Power On/Off
Use the ON/OFF switch located on the front panel to power the unit. The power indicator LED will illuminate when the unit is powered on.
5.2. Mode Selection
- Active Mode (IC): Slide the mode switch to the 'IC' position. In this mode, the mixer requires external DC 5V power, and the built-in amplifier will boost the mixed audio signal.
- Passive Mode (PASS): Slide the mode switch to the 'PASS' position. In this mode, the mixer does not require external power. The audio signal will pass through with slight attenuation.
5.3. Volume Adjustment
- Individual Input Volume: Adjust the IN-1, IN-2, IN-3, and IN-4 knobs to control the volume level of each connected audio source independently.
- Main Output Volume: Adjust the 'VOL' knob to control the overall output volume of the mixed audio signal.
Video 1: Product demonstration showing controls and connections.
6. Maintenance
- Clean the unit with a soft, dry cloth. Do not use liquid cleaners or solvents, as they may damage the finish or internal components.
- Avoid exposing the unit to excessive moisture, heat, or direct sunlight.
- Ensure proper ventilation around the device to prevent overheating.
7. Troubleshooting
7.1. No Sound or Low Volume
- Check Power: If in Active mode, ensure the unit is powered on and connected to an independent DC 5V USB power supply.
- Cable Connections: Verify that all audio cables are securely connected to the correct input and output jacks.
- Volume Levels: Ensure both individual input volume knobs and the main output volume knob (VOL) are adjusted to an audible level.
- Passive Mode Attenuation: Note that in Passive mode, the output signal will be slightly attenuated compared to Active mode.
7.2. Noise or Hum
- Independent Power Supply: If using Active mode, always use an independent DC 5V power supply. Sharing a power supply with other audio devices can cause common ground noise.
- Wireless Interference: Move wireless devices (e.g., Wi-Fi routers, mobile phones) away from the mixer to reduce potential electromagnetic interference.
- Input Source Compatibility: Confirm that only standard audio signals are connected. Phono turntables or microphones are not directly supported and may introduce noise.
8. Specifications
| Feature | Specification |
|---|---|
| Audio Input | 4 groups of 3.5mm AUX |
| Audio Output | 1x 3.5mm AUX |
| Passive Mode | |
| Power Requirement | No power required |
| Control | Passive |
| Input Impedance | 50KΩ |
| Output Impedance | 4.7KΩ |
| Active Mode | |
| Working Voltage | DC 5V (≥0.5A) |
| Power Interface | Type-C USB |
| Output Impedance | 3Ω |
| Dimensions (L*W*H) | 108*59*25mm / 4.25*2.32*0.98in (not including knobs) |
| Net Weight | 206g / 0.45lb |
| Package Weight | 300g / 0.66lb |
| Material | Plastic, Aluminum, Metal |
| Channels | 2 (2.0) |
| Certification | CE |

Figure 5: Product Dimensions and Weight
9. Packing List
The package includes:
- 1× MC5-BX Line Mixer
- 1× Type-C USB Cable
10. User Tips
- If you experience noise when the volume is turned up, ensure you are using an independent power supply for active mode and keep wireless devices away from the mixer.
- Remember that a DC 5V power adapter is not included and needs to be sourced separately for active mode operation.
11. Warranty and Support
For technical support, warranty information, or other inquiries, please contact Douk Audio through the following channels:
- Website: www.doukaudio.com
- Email: nobsound@doukaudio.com
- WeChat/Whatsapp: +86-17704028602
- Address: Room 1329, Wang Cheng Building, Long Guan East Road, Long Hua District, Shen Zhen, Guang Dong, China, 518000
A detailed user manual in PDF format is also available for download: MC5-BX User Manual (PDF)