1. Product Overview
This manual provides essential information for the installation, maintenance, and understanding of your replacement filter for Xiaomi Mi Air Purifier models. These filters are designed to maintain optimal air quality by effectively capturing various airborne pollutants.
Filter Types and Functions:
- Blue Version (Standard): Efficient for dust removal and PM2.5 filtration.
- Purple Version (Antibacterial): Features sterilization, disinfection, and anti-mildew properties, in addition to PM2.5 filtration.
- Green Version (Formaldehyde Removal): Specifically designed for efficient formaldehyde removal, suitable for newly decorated homes. This version includes an independent inner cylinder for activated carbon, which can be removed separately.
All filters are designed to remove PM2.5, dust, pollen, allergens, and bacterial particles. The activated carbon components in the purple and green versions also aid in removing formaldehyde and other odors.
Compatibility:
These replacement filters are compatible with Xiaomi Mi Air Purifier models: 1, 2, 2S, 2C, 2H, 3, 3S, 3C, 3H Pro.
Filter Life:
It is recommended to replace the filter every 3-6 months, depending on usage and air quality conditions.
2. Setup & Installation
Follow these steps to replace your air purifier filter and reset the filter life indicator.
Filter Replacement Procedure:
- Power Off: Ensure your Xiaomi Mi Air Purifier is turned off and unplugged from the power outlet before proceeding.
- Open Filter Compartment: Locate and open the filter compartment cover on your air purifier.
- Remove Old Filter: Carefully pull out the used filter from the compartment. Dispose of the old filter responsibly.
- Insert New Filter: Unpack your new filter. Align the new filter with the compartment and gently push it in until it is securely seated.
- Close Cover: Close the filter compartment cover securely.
Resetting Filter Life Indicator:
After replacing the filter, you must reset the filter life indicator on your air purifier to ensure accurate tracking of the new filter's lifespan.
- Power On: Plug in and turn on your air purifier.
- Locate Reset Button: On the back of the air purifier, locate the small button, often near the laser particle sensor.
- Press and Hold: Press and hold this button for approximately 6 seconds until the display shows "Filter Already Reset" or a similar confirmation.
- Verify: The display should now show 100% filter life. If a prompt still appears after resetting, wait for 8 minutes and check again.
Note on RFID: Some filters, particularly the '3 Pcs RFID' option, include an RFID chip for automatic recognition by the air purifier. Ensure the RFID tag is not damaged during installation.
3. Operating Instructions
Once the new filter is installed and the filter life indicator is reset, your Xiaomi Mi Air Purifier is ready for operation. The filter works in conjunction with your air purifier to clean the air.
- Refer to your specific Xiaomi Mi Air Purifier model's user manual for detailed operating instructions, including power on/off, mode selection, and smart features.
- The filter will continuously purify the air by trapping particles and absorbing odors/gases as the air purifier operates.
4. Maintenance
The filters are designed for single-use and cannot be cleaned or reused. Regular replacement is crucial for maintaining optimal air purification performance.
- Replacement Schedule: Replace the filter every 3-6 months. Your air purifier's display or companion app will typically indicate the remaining filter life.
- Disposal: Dispose of used filters according to local waste disposal regulations.
- Pre-filters (if applicable): If you are using the '10 Pcs Pre Filter' option, these are typically thin sheets designed to extend the life of the main HEPA/Carbon filter by capturing larger particles. These pre-filters can be replaced more frequently as needed.
5. Troubleshooting
If you encounter issues after installing a new filter, consider the following:
- Filter Not Recognized / Error Message:
- Ensure the filter is correctly seated in the compartment.
- Verify that the filter compartment cover is fully closed.
- Perform the filter life reset procedure as described in Section 2.
- If your filter has an RFID chip, ensure it is not damaged and is properly aligned.
- If the issue persists, refer to your air purifier's main user manual for specific error codes or contact customer support.
- Poor Purification Performance:
- Check if the filter is past its recommended lifespan. Replace if necessary.
- Ensure the air purifier itself is operating correctly.
- Verify that the correct filter type is installed for your specific purification needs (e.g., formaldehyde removal for new homes).
6. Specifications
| Feature | Detail |
|---|---|
| Type | Air Purifier Parts (Replacement Filter) |
| Material | HEPA / HEPA and Activated Carbon |
| HEPA Grade | H13 |
| Filter Life | Recommended 3-6 months |
| Function | Filters PM2.5, dust, pollen, allergies, bacterial, formaldehyde removal |
| Compatibility | Xiaomi Mi Air Purifier 1, 2, 2S, 2C, 2H, 3, 3S, 3C, 3H Pro |
| Dimensions (Blue/Purple/Green Filter) | 201mm (Diameter) x 290mm (Height) |
| Dimensions (10 Pcs Pre Filter) | 900mm x 300mm (Sheet) |
| Origin | Mainland China |
7. User Tips
- Filter Type Clarification: Please note that the main filters (Blue, Purple, Green versions) are full cylindrical filters. The '10 Pcs Pre Filter' option refers to thin filter sheets, not full cylindrical filters. Ensure you select the correct product based on your needs.
- Verify Order Contents: Upon receiving your order, carefully check the quantity and type of filters against your purchase details to ensure accuracy.
- RFID Functionality: If your air purifier model supports RFID for filter recognition, ensure the RFID tag on the new filter is intact and properly positioned for the purifier to detect it.
8. Warranty & Support
For any questions regarding the product, installation, or performance, please contact the seller directly. They can provide assistance and support for your specific purchase.