1. Introduction
The HOWEAR HW Ultra 3 Call Smartwatch is a feature-rich device designed for modern connectivity and health monitoring. It supports 4G/5G video calls, GPS precise positioning, and runs on an Android 8.1 operating system with a powerful 4-core chip and 4+64GB memory. This manual provides detailed instructions for setup, operation, and maintenance to help you get the most out of your smartwatch.

Figure 1: HOWEAR HW Ultra 3 Call Smartwatch Overview
2. Product Overview
Familiarize yourself with the physical components of your smartwatch:

Figure 2: Smartwatch Components
- Function Buttons: For navigating menus and interacting with the watch.
- Rotating Camera: A 180° swivel telescopic camera for versatile photo and video capture.
- Magnetic Wireless Charging Port: For convenient charging.
- Power On/Off Button: Used for powering the device on and off, and as an SOS button.
- SIM Card Slot: For inserting a Nano SIM card to enable 4G/5G connectivity.
- Strap Buckle: To secure the watch on your wrist.
3. Specifications
Below are the detailed technical specifications for the HW Ultra 3 Call Smartwatch:

Figure 3: Detailed Specifications Table
| Category | Parameter | Category | Function |
|---|---|---|---|
| Operating System | Android 8.1 | GPS Positioning | Application Market |
| Main Control Chip | ASR8601 (4 cores) | WiFi Connection | Sound Recording |
| Bracelet Memory | 4GB RAM + 64GB ROM | Bluetooth Connectivity | Calculator |
| Architecture | Quad-Core ARM A55 processor | Search for location online | Timer |
| Band | FDD:B1 B2 B3 B5 B7 B8 B20, WCDMA:B1 B2 B5 B8, GSM: Band B2 B3 B5 B8 | Route trajectory query replay | Stopwatch |
| Heart Rate Chip | 3918 | Telephone | Calendar |
| On-screen Display | 2.04 inch Square AMOLED screen, 368*448 resolution | Short Message | Memorandum |
| Battery Capacity | 720mAh | Mail List | Weather |
| Front-facing Camera | Rotate 200W | Album | TikTok |
| Rear Camera | Rotate 200W | Browser | |
| Touch Mode | Full-screen touch | Camera | APK Pure |
| Charging Port | Wireless contact charger | Music | Play Store |
| Waterproof Rating | IP67 | Video | |
| Standby Time | 5 days | Set Up | |
| Time of Use | 2 days (normal use) | File Browser | |
| Local Watch Faces | 10 | Facial Recognition | |
| Dial Market | 50+ | Binding Information | |
| Menu Style | 5 | Theme | |
| APP | Safety (Safe Guard / Safe Guard 2) | Motion | |
| Sedentary Reminder | |||
| Water Clock | |||
| Step Counting | |||
| Heart Rate | |||
| Blood Oxygen | |||
| Dial Market |
4. Setup Guide
4.1. Preparation Before Use
- Verify that the device model is correct and all accessories are included.
- Prepare a Nano SIM card. Ensure it has GPRS data, caller ID, and VoLTE functions enabled. Always turn off the smartwatch before inserting or removing the SIM card.
- Install the companion application, 'Safe Guard' or 'Safe Guard 2', on your mobile phone.
4.2. Installing the Nano SIM Card
Locate the SIM card slot on your smartwatch (refer to Figure 2). Carefully insert your activated Nano SIM card into the slot. Ensure it is correctly oriented.

Figure 4: SIM Card Slot Detail
4.3. Powering On/Off
- Power On: With the watch turned off, press and hold the Power On button until the screen illuminates.
- Power Off:
- Navigate to the Settings page, select the 'Shutdown' option, and confirm.
- Alternatively, long-press the Power On button and confirm the shutdown prompt.
4.4. App Download and Binding
To unlock the full potential of your smartwatch, download and bind it with the companion app:
- Download: Scan the QR code provided in the watch's packaging or search for 'Safe Guard' or 'Safe Guard 2' in your phone's app store.
- Registration and Login: Follow the in-app instructions to create an account and log in.
- App Account Binding: After logging in, go to 'Bind Device', select 'Smartwatch' as the device type, and either enter the 10-digit registration code displayed on your watch or scan the QR code on the watch to complete the binding process.

Figure 5: Popular Apps for Download
Video 1: Unboxing and Feature Showcase
5. Operating Instructions
5.1. Core Functions
- GPS, Base Station, WiFi Positioning: View your real-time location on the APP map.
- Footprint: Access your historical movement tracks within the APP.
- Safe Area: Set up to 3 safe geofences in the APP. The watch will send an alarm notification if it leaves these predefined areas.
- Weather Forecast: The watch automatically updates local weather information. Swipe left on the main interface to access the weather screen.
- Contacts: Store up to 100 numbers on the watch.
- Dialpad: Make calls directly from the watch. This function can be enabled or disabled via the APP settings.
- SOS Function: Set 3 emergency contact numbers in the APP. In an emergency, press and hold the Power On/SOS button for 3 seconds to activate the alarm. The watch will cyclically dial the 3 numbers.
- SMS Reminder Setting: Control whether the watch receives SMS notifications for alarm information. Standard SMS charges may apply.
- Reject Unfamiliar Calls: When enabled, only numbers in your directory (SOS, SMS alert, family numbers) can call the watch. When disabled, any number can call.
- Alarm Clock: Set up to 3 alarms via the APP.
5.2. Multimedia and Communication
- Camera: Use the built-in 180° rotating camera to take photos.
- Album: View, delete, or upload photos taken with the watch to the APP.
- Microchat: Engage in voice and picture chats with the companion APP. Note: The watch cannot initiate micro messages to the phone app, but the phone app can send messages to the watch.
- Video Call: Make video calls to mobile phones logged into the watch's APP account.

Figure 6: Rotating Camera in Action

Figure 7: HD Video Calls
5.3. Advanced Settings and Features
- No-Disturb Time Period: Set up to 4 time periods during which the watch will block all calls and other sounds.
- Settings: Customize lock screen mode, desktop style, volume (media, alarm, ringtone), brightness, VoLTE on/off, and view device information (model, version, IMEI).
- Alipay: Enable Alipay mobile payment for convenient cashless transactions. Scan the provided QR code via the Alipay APP on your phone for specific setup instructions.
- QR Code Information: Displays the device registration code.
- Public No.: Scan to follow the WeChat public account.
- APP Download: Provides a link to download the SafeGuard APP.
- WiFi: Tap to enter, then enable WiFi. Search for your network, tap to connect, and enter the password. If your WiFi is hidden, tap the upper right corner to add the network manually.
- Bluetooth: Tap to enter, then enable Bluetooth. Search for the desired Bluetooth device and tap to pair.
- Personalization: Change watch faces, themes, and wallpapers.
- Screen Brightness: Adjust screen brightness and display timeout.
- Sound Settings: Configure mute or normal sound modes, and adjust phone ringtone, message ringtone, call volume, and ringtone volume.
- Password Unlock: Change your watch password if needed.
- Restore Settings: Use this option to reset watch settings if you encounter signal or other issues.
- Software Upgrade: Connect to WiFi and tap here to wirelessly upgrade the system software as prompted.
- Time and Date: After inserting the SIM card, the watch will automatically update the current date and time via the network.

Figure 8: Online Payment Feature
6. User Tips
- GPS for Running: To activate GPS for a running session and track distance, ensure GPS is enabled in the watch settings. Then, open a sports tracking application (e.g., a pre-installed fitness app or one downloaded from the Play Store) and start a running activity. The watch will use its built-in GPS to record your route and distance.
- Apple Compatibility: This smartwatch primarily runs on Android Wear and is designed for compatibility with Android devices. While some basic functions might work with iOS devices via the companion app, full integration and all features may not be available.
- Mobile Network Support: The watch supports various FDD, WCDMA, and GSM bands for Asian, European, and African editions. For specific compatibility with your local mobile network (e.g., in France), please check the listed bands against your carrier's network specifications.
7. Troubleshooting
- No Signal/Connectivity Issues:
- Ensure your Nano SIM card is correctly inserted and activated with GPRS and VoLTE.
- Check your network coverage.
- Try restarting the watch.
- If issues persist, go to Settings > Restore Settings to reset network configurations.
- App Not Connecting:
- Ensure Bluetooth is enabled on both your phone and watch.
- Verify the 'Safe Guard' or 'Safe Guard 2' app is installed and you are logged in.
- Re-attempt the device binding process in the app.
- Check for app updates.
- Short Battery Life:
- High usage of 4G/5G calls, GPS, and video streaming can drain the battery faster.
- Adjust screen brightness and screen-on time in settings.
- Close unused background applications.
- Ensure the watch is charging correctly using the wireless magnetic charger.
- Watch Freezes or Becomes Unresponsive:
- Perform a soft reset by holding the Power On button until the watch restarts.
- If unresponsive, allow the battery to fully drain and then recharge.
8. Maintenance
- Cleaning: Wipe the watch and strap regularly with a soft, dry cloth. For stubborn dirt, use a slightly damp cloth and mild soap, then dry thoroughly.
- Water Resistance: The watch has an IP67 waterproof rating, meaning it is resistant to dust and can withstand immersion in water up to 1 meter for 30 minutes. It is suitable for daily use and light splashes but not recommended for swimming, diving, or prolonged water exposure.
- Charging: Use the provided wireless magnetic charger. Ensure the charging contacts on the watch and charger are clean and dry before charging.
- Storage: Store the watch in a cool, dry place away from direct sunlight and extreme temperatures.

Figure 9: Wireless Magnetic Charging
9. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the documentation provided at the time of purchase or contact your retailer. Keep your proof of purchase for any warranty claims.