Erilles Android Car Radio for Mazda 3 (2009-2013) User Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Erilles Android Car Radio, designed specifically for Mazda 3 models from 2009 to 2013. Please read this manual thoroughly before using the product to ensure proper functionality and safety.

2. Specifications

3. Setup and Installation

The Erilles Android Car Radio is designed for plug-and-play installation in compatible Mazda 3 models. Professional installation is recommended.

3.1. Compatibility Check

Ensure your Mazda 3 model year is between 2009 and 2013. Refer to the comparison images below to confirm fitment with your vehicle's dashboard.

Important Note:

Cars from model years 2004 and 2005 with small screens in the center console are NOT supported. If your vehicle has this small screen display, please do not purchase this unit.

3.2. Physical Installation

1. Carefully remove the existing car stereo unit from your Mazda 3 dashboard.
2. Connect the provided wiring harness to the car radio and your vehicle's existing wiring. Ensure all connections are secure.
3. If applicable, connect the GPS antenna, WiFi antenna, and 4G LTE antenna (for optional 4G models).
4. Slide the new Erilles Android Car Radio into the dashboard opening until it clicks into place.
5. Secure the unit with any retaining screws or clips.
6. Reassemble the dashboard trim.

3.3. Optional Accessory Installation

• Reverse Camera: Connect the reverse camera to the designated input on the car radio for automatic display when reversing.
• 360 Panoramic Camera (Optional): If you purchased the optional 360 panoramic feature, ensure the camera system is installed and connected as per its specific instructions. The 360 feature chip will be pre-installed in the radio if ordered together.
• External DAB+ (Optional): Connect the external DAB+ receiver for digital audio broadcasting.
• OBD2 Scanner (Optional): Connect a compatible OBD2 scanner (e.g., ELM 327 mini) via Bluetooth for vehicle diagnostics.

4. Operating Instructions

4.1. Initial Power On and Setup

1. Turn on your vehicle's ignition. The car radio should power on automatically.
2. Follow the on-screen prompts for initial setup, including language selection and time zone.
3. Connect to a Wi-Fi network for internet access and app downloads.

4.2. Key Features and Functions

• Navigation: Utilize the built-in GPS with support for BDS and GLONASS. Download and install your preferred map navigation apps. The dual-frequency GPS ensures rapid and accurate positioning.
• Wireless CarPlay & Android Auto: Connect your smartphone wirelessly via Wi-Fi for seamless integration of CarPlay or Android Auto. This allows access to navigation, music, calls, and messages directly from the car radio display.
• Bluetooth: Pair your phone via Bluetooth 5.4 for hands-free calling and audio streaming. The Qualcomm BT technology ensures lower power consumption and faster transmission.
• Wi-Fi & 4G LTE: Connect to 5G Wi-Fi hotspots or insert a SIM card (for optional 4G models) to access cellular networks for browsing, streaming, and app usage.
• DSP Sound Effects: Customize your audio experience with the integrated DSP (Digital Sound Processor) featuring 32-band EQ. Supports 'VELVET SOUND' audio technology and DTS.
• Split Screen: Use two applications simultaneously on the QLED display for enhanced multitasking.
• Steering Wheel Control: Control music playback, volume, and answer calls directly from your vehicle's steering wheel buttons.
• Reverse Camera Input: The unit automatically displays the reverse camera feed when the vehicle is in reverse gear.
• HDMI Output: Extended rear-seat entertainment is supported via HDMI output.
• Custom Home Page APP: Personalize your home screen with your favorite applications.
• Button Lights: Customize the color of the RGB button lights to match your vehicle's interior or personal preference.

5. Maintenance

To ensure the longevity and optimal performance of your Erilles Android Car Radio, follow these general maintenance guidelines:

• Cleaning: Use a soft, dry cloth to clean the screen and exterior surfaces. Avoid abrasive cleaners or solvents that could damage the display or finish.
• Software Updates: Erilles provides free firmware updates. Regularly check for and install available software updates to ensure the system runs efficiently and has the latest features and security patches.
• Cooling System: The unit features a powerful cooling fan to manage temperature. Ensure that the ventilation areas around the unit are not obstructed to allow for proper airflow.
• Environmental Conditions: Avoid exposing the unit to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.

6. Troubleshooting

If you encounter issues with your car radio, refer to the following common troubleshooting steps. If the problem persists, contact customer support.

• No Power: Check all power connections and ensure the vehicle's ignition is on. Verify the car's fuse box for any blown fuses related to the stereo system.
• No Sound: Check volume settings, ensure speakers are properly connected, and verify audio output settings in the system menu.
• GPS Signal Loss: Ensure the GPS antenna is properly installed and has a clear line of sight to the sky. Move the vehicle to an open area if signal is weak.
• Bluetooth Connectivity Issues: Ensure Bluetooth is enabled on both the car radio and your mobile device. Try unpairing and re-pairing the devices.
• Touchscreen Unresponsive: Try restarting the unit. If the issue continues, a factory reset might be necessary (note: this will erase all user data).
• System Lag/Freezing: Close unnecessary applications. If the issue persists, consider a system restart or factory reset. Ensure sufficient storage space is available.

7. Warranty and Support

Your Erilles Android Car Radio comes with a 2-year warranty from the date of purchase, covering manufacturing defects and malfunctions under normal use.

Erilles is committed to providing high-quality products and services. We offer free firmware updates to enhance your product's performance and features over time.

For any product issues within 15 days of receipt, please contact customer support for assistance. Depending on the issue, a free return, refund, or replacement unit may be provided.

For technical support, warranty claims, or general inquiries, please contact Erilles customer service through the platform where you purchased the product.

8. User Tips

• Check Compatibility Carefully: Before purchasing, always double-check the compatibility with your specific Mazda 3 model year, especially for 2004-2005 models with small center console screens, as these are not supported.
• Optimize Audio: Experiment with the 32-band DSP equalizer settings to fine-tune the audio output to your preference.
• Stay Updated: Regularly check for and install firmware updates to benefit from new features and performance improvements.
• Personalize Your Experience: Utilize the custom home page app feature to arrange your most-used applications for quick access. Adjust the RGB button lights to match your car's interior for a personalized touch.
• Utilize Split Screen: For long drives, use the split-screen feature to run navigation and music simultaneously, enhancing convenience and safety.