SCULPFUN SF-A9

Contents

SCULPFUN SF-A9 40W Laser Engraving Machine User Manual

Model: SF-A9 | Brand: SCULPFUN

Introduction

Thank you for choosing the SCULPFUN SF-A9 40W Laser Engraving Machine. This high-tech product integrates light, machinery, and electricity to provide precise engraving and cutting capabilities. Please read this manual carefully and keep it for proper use and maintenance of the equipment.

Important Safety Statement:

All losses caused by improper use or failure to follow the instructions in this user manual shall be borne by the individual. The manufacturer reserves the right to interpret this manual and modify any information, data, or technical details contained herein.

Safety Precautions

Before operating the equipment, users must carefully read and strictly adhere to the operating procedures. Laser processing involves risks. Users should carefully consider if the object being processed is suitable for laser operations. Processing objects and emissions must comply with local laws and regulations.

This equipment uses a Class IV laser (strong laser radiation). Laser radiation may cause the following conditions:

  1. Ignition of surrounding flammable materials.
  2. Production of other radiation and toxic/harmful gases during laser processing, depending on the objects.
  3. Direct irradiation of laser radiation can cause human injury.

The usage area must be equipped with fire-fighting equipment. It is prohibited to stack flammable and explosive items around the workbench and equipment. Good ventilation must be maintained.

The environment for the equipment should be dry, free of pollution, vibration, strong electricity, strong magnetism, and other interference. The working environment temperature should be 10-35°C, and humidity 5-95% (non-condensing).

Laser warning symbol

Laser Warning: Do not aim the laser at humans, animals, or flammable objects. Avoid skin burns and fires.

Eye protection warning symbol

Eye Protection: The laser's brightness is harmful to eyes. Do not look directly at the laser.

No reaching in symbol

Hand Safety: Keep hands away from the machine when it is operating to prevent injury.

Unplug symbol

Power Off: Unplug the machine when not in use to prevent accidental operation by third parties.

Product List (What's in the Box)

The SCULPFUN SF-A9 package includes the following components:

  • 1 x Host (Main machine frame)
  • 1 x 40W Laser head
  • 1 x Power Adapter
  • 4 x Footing
  • 1 x Air pump
  • 1 x Goggles (Safety glasses)
  • 4 x Expand the base
  • 1 x Antenna
  • 1 x Data cable
  • 1 x Motor wire (for rotary axis)
  • 5 x Ties
  • 2 x Key
  • 4 x Screw
  • 1 x Toolkit
  • 1 x Aluminum plate
  • 2 x Basswood board
  • 1 x Lens Repair Kit
SCULPFUN SF-A9 40W Laser Engraving Machine with accessories

Image: Overview of the SCULPFUN SF-A9 40W Laser Engraving Machine and its included accessories.

Components Overview

Familiarize yourself with the main components of the SF-A9 machine:

  1. Emergency stop knob
  2. Switch button
  3. Key switch
  4. Motherboard box
  5. Laser
  6. Fixed focus column
  7. Air pump
  8. X axis
  9. Y axis
Diagram of SCULPFUN SF-A9 components with numbered labels

Image: Labeled diagram showing the main components of the SF-A9 machine.

Structure Diagram

Detailed views of the machine's structure:

  • Front View: Shows the laser gear and emergency stop knob.
  • Right Elevation: Displays the Z-axis adjustment knob, motherboard box, and lock.
  • Rear View: Includes data line interface, air pump interface, adjustment screw, and power interface.
  • Left View: Shows the Z-axis scale and lock.
Detailed structural diagrams of the SF-A9 from different angles

Image: Multi-view diagram illustrating the structural details and interfaces of the SF-A9.

Assembly Instructions

  1. Install Laser Head: After unpacking, install the laser head onto the X-axis and tighten the thumb screws.
  2. Mount X-axis: Place the X-axis (with the laser head installed) onto the main host frame and secure it by tightening the four screws.
  3. Attach Feet and Antenna: Install the four feet and the BT/WiFi antenna.
  4. Connect Air Pipe: Connect the air pipe from the machine to the air pump.
  5. Connect Power and Data:
    1. Connect the data interface to your computer.
    2. Plug the air pump power cord into the air pump interface.
    3. Plug in the machine's power cord.
    4. You can now turn on the machine and begin use.
SCULPFUN SF-A9 40W Laser Engraving Machine with accessories

Image: The main machine and its components for assembly.

Focusing (Quick Focus & Precise Focus)

Quick Focus

  1. Put down the focusing column located on the right side of the laser head.
  2. Turn the right-hand screw to move the focus column to the surface of the engraving object.
  3. Tighten the screw, and then retract the focus column.

Precise Focus

When cutting thick objects, after completing the quick focus, rotate the precise focus downward by 1-3mm to improve the cutting effect.

You can accurately control the height by observing the scale on the left. Carving objects of different heights requires refocusing to ensure optimal work results.

Diagram illustrating quick and precise focusing steps for the laser module

Image: Visual guide for quick and precise focusing, showing the adjustment knob and height scale.

APP Download & Connection

APP Download

To download the Sculpfun Laser Tool APP:

  • Visit the official website: sculpfun.com (for MAC & WIN versions).
  • Search "sculpfun" on Google Play Store or Apple App Store on your mobile phone.
  • Alternatively, scan the QR codes provided below for direct download.
QR code for Android APP

Android APP

QR code for iOS APP

iOS APP

QR code for PC Tool (MAC or WIN)

PC Tool (MAC or WIN)

Note: Android users may need to use a browser to scan the QR code. After installation, grant necessary permissions. If Google Play Store is unavailable, scan the PC Tool QR code and visit the official website for the APK installation version.

Mobile APP Connection Method 1 (AP WIFI)

The machine defaults to AP mode. After powering on, it automatically broadcasts a Wi-Fi signal. Connect your mobile phone to the machine's Wi-Fi (SSID: Sculpfun SF-A9 XXXXX, Password: 12345678). The default IP address is 192.168.4.1. Enter this IP address in the SculpFun APP to connect.

Mobile APP Connection Method 2 (Home Wi-Fi Mode)

  1. Connect the machine to a computer using a data cable.
  2. Open the downloaded Sculpfun Laser Tool configuration software on your computer.
  3. Select "WiFi Configuration Tool".
  4. In the configuration tool, select the correct COM port (e.g., COM14) and click "Connect".
  5. Enter your home Wi-Fi name and password.
  6. Click "Connect WiFi".
  7. Click "Get IP" to obtain the machine's current IP address.
  8. You can now unplug the data cable. Enter the obtained IP address into the mobile APP and click "Connect".

Important Notes for Wi-Fi Connection:

  • The machine only supports 2.4GHz Wi-Fi. Ensure your home Wi-Fi is set to 2.4GHz.
  • The Wi-Fi password should only contain English letters or numbers; special symbols are not supported. If your password is complex, you may need to change it.
  • Your mobile phone must be on the same Wi-Fi network as the machine.

APP Interface Introduction

The APP interface provides several functions:

  • Setup: User Agreement, Privacy Policy, Version Info, Language Settings.
  • Machine Information: Displays machine name and IP address.
  • Creation: Access camera, built-in material library, picture library, brush tool, QR code generator, and text editor.
  • Control: Control the movement of the engraving machine.
  • Graving: View uploaded files and engravings on the machine.
  • Visit Official Website: Direct link to the Sculpfun website.

The control interface allows you to set laser moving speed, distance per click, and includes a control panel for movement, laser preview, and air assist toggle.

The creation interface offers tools like eraser, brush, drawing area, shape/QR code insertion, operating area/text input, and material import.

Engraving mode selection allows choosing between different styles (Gray, Strong, Sketch, Dither) and adjusting brightness and contrast before engraving.

Engraving parameter settings include file name, engraving size, speed, power, laser position, engraving preview, file upload, air assist switch, and engraving mode (M3/M4 for constant power).

The engraving interface displays progress, allows pausing/stopping, and shows completion status.

PC Software Introduction & Connection

The SCULPFUN SF-A9 supports LightBurn and LaserGRBL software for PC control.

PC Connection Method 1 (USB Connection)

  1. Connect the machine to your computer using a data cable.
  2. After powering on the machine, open LightBurn or LaserGRBL and select the corresponding machine port (COM port). The machine is now ready for use.

PC Connection Method 2 (Bluetooth Connection)

  1. Connect the machine to your computer using a data cable.
  2. After powering on the machine, open the Sculpfun Laser Tool configuration software on your computer.
  3. Click "Switch Bluetooth" to enable Bluetooth mode on the machine. The text box will display the Bluetooth name of the machine (e.g., Sculpfun SF-A9 63714).
  4. Unplug the USB data cable.
  5. Open LightBurn or LaserGRBL and select the corresponding Bluetooth port to connect.

Computer Mode Switching (Precision Mode - High-Speed Mode)

The machine defaults to precision mode, which can be modified through LightBurn. To switch between modes:

  1. After opening LightBurn, set the macro button in the console to either $Speed=0 (low speed/precision mode) or $Speed=1 (high speed).
  2. You can then switch between these modes with a single click using the set macro button.
Speed Mode Parameters
Mode X.max mm/min Y.max mm/min Acceleration
$Speed=0 (Low) 20000 20000 1000
$Speed=1 (High) 36000 36000 3000

Table: Recommended speed and acceleration settings for low and high-speed modes.

Operating Instructions

This section provides recommended parameters for various materials and modes. These parameters are tested in a laboratory environment and are for reference only. Actual performance may vary depending on the specific material and conditions.

Cutting Parameters (SF-A9 40W)
Material Name Power (%) Speed (mm/min) Frequency
6.2mm Corrugated paper100%≤25001
2.2mm Artificial leather100%≤10001
8mm MDF100%≤2501
30mm Paulownia100%≤2002
3mm Basswood100%≤15001
20mm Basswood100%≤1501
12mm Acrylic100%≤1002
Engraving Parameters (SF-A9 40W)
Material Name Power (%) Speed (mm/min) Frequency
Corrugated paper15%60001
Artificial leather15%80001
MDF20%60001
Bamboo25%50001
Basswood30%60001
Lacquered metal30%50001
Cutting Parameters (SF-A9 20W)
Material Name Power (%) Speed (mm/min) Frequency
4mm MDF100%≤2001
8mm MDF100%≤2003
10mm Paulownia100%≤4001
25mm Paulownia100%≤2003
3mm Basswood100%≤8501
10mm Basswood100%≤2001
20mm Basswood100%≤2003
Engraving Parameters (SF-A9 20W)
Material Name Power (%) Speed (mm/min) Frequency
Corrugated paper10%30001
Artificial leather10%50001
MDF10%20001
Bamboo15%25001
Basswood20%30001
Lacquered metal20%30001
Engraving Parameters (High-Speed, SF-A9 40W)
Material Name Power (%) Speed (mm/min) Frequency
Corrugated paper55%360001
Artificial leather50%360001
MDF75%360001
Bamboo100%360001
Basswood100%360001
Lacquered metal60%360001
Engraving Parameters (High-Speed, SF-A9 20W)
Material Name Power (%) Speed (mm/min) Frequency
Corrugated paper100%360001
Artificial leather70%360001
MDF100%300001
Bamboo100%150001
Basswood100%100001
Lacquered metal100%360001

Note: These parameters are laboratory tested and for reference only. Actual results may vary.

Maintenance

General Maintenance

The X linear guides should be regularly coated with lubricating oil or grease to prevent rust.

Maintenance Cycle:

  • Frequent users (more than 8 hours/day): Maintenance required at least every 15 days.
  • Light users (no more than 2 hours/day): Maintenance required at least every 2 months.

During the maintenance cycle, if dirt or impurities appear, the surface of the guide rail needs to be cleaned immediately and grease applied after ensuring it is clean.

Adjusting Belt Tightness

Proper belt tension is crucial for engraving accuracy. If the carved circle is deformed or the shape is not precise, the belt might be too tight or too loose.

For conveyor belts on left and right fenders:

  1. Loosen screw 1 first, then adjust screw 2.
  2. When adjusting screw 2, tighten it clockwise; loosen it counterclockwise.
  3. The tightness of the conveyor belts on the left and right baffles must be consistent to avoid affecting the engraving effect.
  4. After adjusting the tightness, tighten screw 1.

For conveyor belt on the center plate:

  1. Loosen screw 1 first, then adjust screw 2.
  2. When adjusting screw 2, tighten it clockwise; loosen it counterclockwise.
  3. After adjusting the tightness, tighten screw 1.

Use your fingers to hold the upper and lower parts of the belt simultaneously to feel the tension. Adjust as needed.

Troubleshooting Common Problems

1. Why doesn't the laser fan spin?

When the laser stops working, the fan will automatically stop after 2 minutes of cooling to avoid noise. It will rotate again once work resumes.

2. How to manually position the SF-A9?

  1. Put down the fixed focus column on the right side of the laser and loosen the thumb screw.
  2. Slide the laser up and down so that the fixed focus column rests against the surface of the object to be processed.
  3. Tighten the thumb screw and retract the fixed focus column.
  4. When cutting thick objects, after focusing is complete, use the rear Z-axis knob to observe the left scale and lower it by 1-3mm to improve the cutting effect.

3. No response when connecting to mobile APP?

There are two ways to connect the APP: AP Wi-Fi mode and Wi-Fi mode.

  • AP Wi-Fi mode: The machine automatically launches Wi-Fi (SSID: Sculpfun SF-A9 XXXXX, Password: 12345678). Open the APP, connect, and the default IP address is 192.168.4.1.
  • Wi-Fi mode: You need to use computer tools to connect to Wi-Fi. Note that it only connects to 2.4GHz Wi-Fi and does not support special symbols in the password. If it cannot be used normally, contact customer service and send a screenshot of your mobile phone configuration for technical support.

4. Flame Alarm Instructions

The machine has a built-in flame sensor and temperature sensor under the laser. Upon detecting a flame, the machine automatically calculates the safest distance, moves the laser head to a safe position, stops working, and alarms. The alarm sound will not stop automatically; the machine needs to be restarted manually.

5. Tilt Alarm Description

The machine has a built-in tilt sensor. If the table on which the machine is placed tilts and the angle exceeds 15°, it will stop working and alarm. The alarm sound will not stop automatically; the machine needs to be restarted manually.

Further Assistance

If you cannot resolve issues using the steps above or have other questions, you can send a fault video, machine details, and other relevant information to SculpFun official after-sales email: support@sculpfun.com. After-sales personnel will assist you.

Specifications

Feature Specification
Brand NameATOMSTACK (Note: Product is SCULPFUN SF-A9)
SCULPFUN ModelSF-A9
Laser Module Power20W, 40W (Switchable)
Maximum Working Speed36000mm/min
Maximum Print Size (Working Area)400*400mm
Precision0.1mm
Wavelength450nm±5nm
Operating SystemWin7/Win8/Win10/Win11/MAC/IOS/Android/Linux
Slice SoftwareLightBurn/LaserGRBL
File FormatNC, BMP, JPG, PNG, DXF etc.
Interface TypeUSB
Wireless ConnectivityWiFi (2.4Ghz), Bluetooth (4.2)
Auto LevelingYes
CE CertificationYes
Working VoltageDC24V
Working Current7A
Flame Alarm60℃ trigger
Tilt Sensor15° trigger
Product Weight6.2KG
Product Size606*665*110mm
Product Package Weight11.2KG
Product Package Size715*665*150mm
LanguageEnglish/German/French/Italian/Spanish/Portuguese

User Tips

  • For optimal engraving and cutting results, always ensure the material is properly focused. Use the quick focus for initial setup and precise focus for fine-tuning, especially with thicker materials.
  • Regularly check and adjust the tension of the conveyor belts to maintain engraving accuracy and prevent deformation of carved shapes.
  • When using the mobile APP, remember that the machine only supports 2.4GHz Wi-Fi, and Wi-Fi passwords should be alphanumeric only.
  • Keep the machine's linear guides lubricated to prevent rust and ensure smooth operation. Adhere to the recommended maintenance cycles based on your usage frequency.
  • Always ensure proper ventilation in your workspace to dissipate any fumes or gases produced during laser operations.

Warranty & Support

For detailed warranty policy, please visit the official website: sculpfun.com.

For Laser Engraver technical support and service, please email: support@sculpfun.com.

Official Group for Sculpfun Users: https://www.facebook.com/groups/538557960530958.

For more information, including detailed usage video tutorials, you can scan the QR code on the manual's cover or visit the official YOUTUBE channel: https://www.youtube.com/@SCULPFUNReal.

A user manual (PDF) is also available for download: SCULPFUN SF-A9 User Manual (PDF).

Product Overview Video

Video: A comprehensive overview of the SCULPFUN SF-A9 40W Laser Engraving Machine, demonstrating its features, assembly, and various applications like engraving and cutting different materials.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.