1. Introduction
Thank you for choosing the Hirisi Carp Fishing Alarm Set S3. This advanced bite alarm system is designed to enhance your carp fishing experience with reliable bite indication and convenient remote control features. This manual provides detailed instructions for setting up, operating, and maintaining your S3 alarm set to ensure optimal performance.
2. Package Contents
Your Hirisi Carp Fishing Alarm Set S3 package includes the following items:
- Bite Alarms (Model S3-3 includes 3 alarms, Model S3-4 includes 4 alarms)
- Remote Control Receiver
- Protective Zipped PU Case
3. Product Overview
The Hirisi S3 set consists of individual bite alarms and a central remote control receiver. Each component is designed for durability and ease of use in various fishing conditions.
3.1 Bite Alarm Features:
- Waterproof design for rain.
- Fishing line drop and return indication with red and green LED lights.
- Adjustable Volume, Tone, and Sensitivity controls.
- Anti-theft warning when the fishing rod is picked up.
- Nightlight function (can be turned on/off).
- Additional jack for illuminated swingers.
3.2 Remote Control Receiver Features:
- Remote control functionality for adjusting alarm settings.
- Volume, Tone, and Vibration control.
- High output speaker and alarming LED light.
- Signal memory LED for 20 seconds.
- Wireless transmission range of more than 150 meters.
4. Setup Instructions
4.1 Battery Installation
- For Bite Alarms: Each fish alarm requires one (1) 9V battery. Open the battery compartment on the back of the alarm and insert the 9V battery, ensuring correct polarity.
- For Receiver: The receiver requires three (3) AAA batteries. Open the battery compartment on the back of the receiver and insert the AAA batteries, ensuring correct polarity.
Note: Batteries are not included in the package. Please purchase them separately.
4.2 Mounting the Bite Alarms
- Screw the bite alarm onto your rod pod or bank stick.
- Place your fishing rod securely on the bite alarm.
- Thread your fishing line through the roller on the bite alarm.
- If using an illuminated swinger, connect it to the additional jack on the bite alarm.
4.3 Linking Alarms to Receiver (if necessary)
The bite alarms and receiver are typically pre-linked. If they do not match each other or you need to re-link them, follow these steps:
5. Operating Instructions
5.1 Powering On/Off
- Bite Alarms: Locate the power switch on each alarm and slide it to the 'ON' position.
- Receiver: Locate the power switch on the receiver and slide it to the 'ON' position.
5.2 Adjusting Settings via Receiver
The receiver allows you to remotely adjust the settings of your bite alarms. Use the buttons on the receiver to control the following:
- Volume (V): Adjust the alarm sound level.
- Tone (T): Change the pitch of the alarm sound.
- Sensitivity (S): Modify how sensitive the alarm is to line movement.
- Night Light (W): Turn the night light function on or off.
5.3 Bite Indication
- When a fish bites, the bite alarm will sound and illuminate its LEDs (red for line drop, green for line return).
- The receiver will also sound, flash its corresponding LED, and vibrate (if enabled) to alert you.
- The signal memory LED on the receiver will remain lit for 20 seconds after a bite.
5.4 Anti-Theft Function
The system includes an anti-theft warning. If a fishing rod is removed from the bite alarm while the function is active, the alarm and receiver will trigger an alert.
6. Maintenance
6.1 Cleaning
Wipe the alarms and receiver with a soft, damp cloth after each use to remove dirt and debris. Do not use harsh chemicals or abrasive cleaners.
6.2 Battery Replacement
Replace batteries when the indicators show low power or when the devices stop functioning correctly. Always use new, high-quality batteries of the specified type (1x 9V for alarms, 3x AAA for receiver).
6.3 Storage
Store the alarm set in its protective zipped PU case in a cool, dry place when not in use. Remove batteries if storing for extended periods to prevent leakage.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Alarms or receiver not powering on. | Dead or incorrectly installed batteries. | Check battery polarity and replace with fresh batteries. |
| No signal from alarm to receiver. | Alarms and receiver not linked, or out of range. | Ensure devices are linked (refer to Section 4.3). Reduce distance between alarm and receiver. Check for obstructions. |
| Weak or inconsistent bite indication. | Low battery, incorrect sensitivity setting, or line not properly seated. | Replace batteries. Adjust sensitivity (S) on the receiver. Ensure fishing line is correctly placed on the alarm's roller. |
| Anti-theft alarm triggers unexpectedly. | Rod movement or sensitivity too high. | Ensure rod is stable. Adjust sensitivity (S) on the receiver. |
8. Specifications
| Feature | Detail |
|---|---|
| Model | S3-3 (1+3) / S3-4 (1+4) |
| Material | ABS |
| Waterproof | Yes (for rain) |
| Bite Alarm Battery | 1 x 9V battery (not included) |
| Receiver Battery | 3 x AAA batteries (not included) |
| Wireless Range | More than 150 meters |
| Signal Memory LED | 20 seconds |
| Bite Alarm Dimensions (approx.) | 12 cm (Height) x 5.5 cm (Width) |
| Receiver Dimensions (approx.) | 9.5 cm (Height) x 5.5 cm (Width) |
9. Warranty and Support
Hirisi provides a 3-year quality warranty for this product. In case of a defective product, a free replacement will be provided. For any support inquiries or warranty claims, please contact your retailer or Hirisi customer service.