NANKADF GA3010L, WPS3010H, DPS3010U, EPS3210, TPS-C3010, WPS605H, TPS3010, TPS605, DPS605U, EPS6205, TPS-C605

Contents

NANKADF Adjustable Switching DC Power Supply User Manual

Models: GA3010L, WPS3010H, DPS3010U, EPS3210, TPS-C3010, WPS605H, TPS3010, TPS605, DPS605U, EPS6205, TPS-C605

1. Introduction

This manual provides detailed instructions for the NANKADF Adjustable High-Precision DC Regulated Power Supply. This device is designed to provide a stable and adjustable DC power source, capable of simultaneously displaying voltage, current, and power output. It features programmable encoder adjustment for precise control, Over Current Protection (OCP), and integrated USB-A/Type-C fast charging ports supporting various fast charging protocols. Its compact size, lightweight design, and robust performance make it suitable for a wide range of applications.

The NANKADF DC Power Supply is ideal for cell phone and computer repair, battery charging, educational purposes, production line testing, product aging, plating, and general laboratory or scientific research use.

2. Safety Information

  • Always connect the power supply to a properly grounded outlet.
  • Do not operate the device in wet or damp conditions.
  • Ensure proper ventilation to prevent overheating. The device includes an intelligent temperature-controlled cooling fan.
  • Do not open the casing of the power supply; there are no user-serviceable parts inside except for the fuse.
  • Before connecting or disconnecting any load, ensure the output is turned off.
  • Verify correct polarity (+ and -) before connecting to any circuit or device.
  • Avoid short-circuiting the output terminals for extended periods, even with OCP enabled.
  • Keep out of reach of children.

3. Product Overview

The NANKADF DC Power Supply series offers various models, each designed for specific needs while maintaining core functionalities. Below are general diagrams and descriptions of common features across the series.

Three NANKADF DC Power Supply models (GA, WPS, TPS-C series) showing their front panels and displays.
Figure 3.1: Overview of NANKADF DC Power Supply models.

3.1 Front Panel Controls and Indicators

The front panel typically includes a digital display for Voltage (V), Current (A), and Power (W), along with various controls and indicators. Specific layouts may vary by model series.

Diagram of WPS Series DC Power Supply front panel with labeled components.
Figure 3.2: WPS Series Front Panel Layout
  • C.V Indicator: Constant Pressure/Voltage Indicator.
  • C.C Indicator: Constant Current Indicator.
  • OCP Indicator: Short-circuit Protection Indicator.
  • OUT Indicator: Output Indicator.
  • Voltage Display: Shows the output voltage in Volts (V).
  • Current Display: Shows the output current in Amperes (A).
  • Power Display: Shows the output power in Watts (W).
  • Output Key: Toggles the main power output ON/OFF.
  • Power Switch: Main power ON/OFF switch for the unit.
  • Grounding Terminal (Green): Connects to ground.
  • Positive Polarity (Red): Positive output terminal.
  • Negative Polarity (Black): Negative output terminal.
  • USB Fast Charging Port: Provides fast charging for compatible devices.
  • Voltage Adjustment Knob: Adjusts the output voltage.
  • Current Adjustment Knob: Adjusts the output current.
Diagram of TPS Series DC Power Supply front panel with numbered components.
Figure 3.3: TPS Series Front Panel Layout
  • 1 Voltage display: Shows the output voltage.
  • 2 USB-C: USB Type-C fast charging port.
  • 3 Current display: Shows the output current.
  • 4 USB-A: USB Type-A fast charging port.
  • 5 Power display: Shows the output power.
  • 6 Constant voltage indicator light: Illuminates when in constant voltage mode.
  • 7 Constant current indicator light: Illuminates when in constant current mode.
  • 8 Short-circuit protection indicator: Illuminates when OCP is active.
  • 9 Output indicator: Illuminates when output is active.
  • 10 Output key: Toggles the main power output ON/OFF.
  • 11 Voltage/current switching button: Used for encoder adjustment.
  • 12 Coding button: Encoder knob for precise adjustment.
  • 13 Short-circuit protection button: Activates/deactivates OCP.
  • 14 Power switch: Main power ON/OFF switch for the unit.
  • 15 Positive polarity (red): Positive output terminal.
  • 16 Ground terminal (green): Connects to ground.
  • 17 Negative polarity (black): Negative output terminal.
Diagram of DPS Series DC Power Supply front panel with labeled components.
Figure 3.4: DPS Series Front Panel Layout
  • Voltage Display: Shows the output voltage.
  • Constant Voltage Indicator (C.V): Illuminates when in constant voltage mode.
  • Current Display: Shows the output current.
  • Constant Current Indicator (C.C): Illuminates when in constant current mode.
  • Power Display: Shows the output power.
  • USB-C: USB Type-C fast charging port.
  • USB-A: USB Type-A fast charging port.
  • Power Switch (ON/OFF): Main power ON/OFF switch for the unit.
  • Grounding Terminal (green): Connects to ground.
  • Positive Polarity (red): Positive output terminal.
  • Negative Polarity (black): Negative output terminal.
  • Voltage Coarse Tuning (V-COARSE): Knob for large adjustments to voltage.
  • Voltage Fine Tuning (V-FINE): Knob for small, precise adjustments to voltage.
  • Current Coarse Tuning (A-COARSE): Knob for large adjustments to current.
  • Current Fine Tuning (A-FINE): Knob for small, precise adjustments to current.
  • Short-Circuit Protection Switch (OCP): Activates/deactivates OCP.
Diagram of EPS Series DC Power Supply front panel with labeled components.
Figure 3.5: EPS Series Front Panel Layout
  • Voltage Display: Shows the output voltage.
  • Constant Pressure Indicator (C.V): Illuminates when in constant voltage mode.
  • Current Display: Shows the output current.
  • Constant Current Indicator (C.C): Illuminates when in constant current mode.
  • Power Display: Shows the output power.
  • Storage Indicator Light: Indicates active memory preset.
  • Memory Button (M1, M2, M3): Used to save and recall voltage/current presets.
  • USB Fast Charging Port: Provides fast charging for compatible devices.
  • Power Switch: Main power ON/OFF switch for the unit.
  • Grounding Terminal (green): Connects to ground.
  • Positive Polarity (red): Positive output terminal.
  • Negative Polarity (black): Negative output terminal.
  • Voltage Adjustment Knob: Adjusts the output voltage.
  • Current Adjustment Knob: Adjusts the output current.
  • Short-circuit protection indicator: Illuminates when OCP is active.
  • Output indicator: Illuminates when output is active.
  • Output key: Toggles the main power output ON/OFF.
  • Short-circuit protection switch (OCP): Activates/deactivates OCP.
Diagram of TPS-C Series DC Power Supply front panel with numbered components.
Figure 3.6: TPS-C Series Front Panel Layout
  • 1 Voltage display: Shows the output voltage.
  • 2 Current display: Shows the output current.
  • 3 Power display: Shows the output power.
  • 4 USB interface: USB-A and USB-C ports for fast charging.
  • 5 USB voltage display: Shows voltage output from USB ports.
  • 6 USB current display: Shows current output from USB ports.
  • 7 Constant voltage indicator light: Illuminates when in constant voltage mode.
  • 8 Constant current display light: Illuminates when in constant current mode.
  • 9 Storage button (M1, M2, M3): Used to save and recall voltage/current presets.
  • 10 Function lock button: Locks current settings to prevent accidental changes.
  • 11 Short circuit protection switch: Activates/deactivates OCP.
  • 12 Output button: Toggles the main power output ON/OFF.
  • 13 Voltage adjustment knob: Adjusts the output voltage.
  • 14 Current regulation knob: Adjusts the output current.
  • 15 Positive polarity (red): Positive output terminal.
  • 16 Negative polarity (black): Negative output terminal.
  • 17 Power switch: Main power ON/OFF switch for the unit.

3.2 Rear Panel Features

Rear view of the NANKADF DC Power Supply showing the cooling fan and fuse holder.
Figure 3.7: Rear Panel with Cooling Fan and Fuse
  • Intelligent Temperature Control Cooling Fan: Automatically adjusts speed based on internal temperature to ensure optimal cooling and quiet operation.
  • Fuse Holder: Contains a replaceable fuse for overcurrent protection of the input power.
  • AC Power Input: Standard AC power inlet for connecting the power cord.

4. Specifications

The NANKADF DC Power Supply series offers various models with different voltage and current capabilities. Please refer to the table below for detailed specifications.

Table showing specifications for various NANKADF DC Power Supply models including voltage, current, machine size, weight, and power line type.
Figure 4.1: Model Specifications Table
General Specifications
AttributeValue
TypePower Supply
Rated Capacity40-1000VA (including 40VA)
Output Current0-10A
Output Frequency50Hz 60Hz
Brand NameNANKADF
Output TypeSINGLE
OriginMainland China
CertificationCE, FCC
Model Specific Specifications
ModelVoltage / CurrentMachine Size (LWH)Machine WeightPower Line
GA3010H (Black)0-32V / 0-10A190x80x145 (mm)2.54lbEU
GA3010B (White)0-32V / 0-10A190x80x145 (mm)2.54lbEU
GA3010L (Blue)0-32V / 0-10A190x80x145 (mm)2.54lbEU
WPS3010H0-30V / 0-10A190x90x145 (mm)2.54lbEU
WPS605H0-60V / 0-5A190x90x145 (mm)2.54lbEU
TPS30100-30V / 0-10A210x145x80 (mm)2.54lbEU
TPS6050-60V / 0-5A210x145x80 (mm)2.54lbEU
DPS3010U0-30V / 0-10A190x90x145 (mm)2.54lbEU
DPS605U0-60V / 0-5A190x90x145 (mm)2.54lbEU
EPS32100-32V / 0-10A190x90x145 (mm)2.54lbEU
EPS62050-62V / 0-5A190x90x145 (mm)2.54lbEU
TPS-C30100-30V / 0-10A210x145x80 (mm)2.54lbEU
TPS-C6050-60V / 0-5A210x145x80 (mm)2.54lbEU

5. Setup

  1. Unpacking: Carefully remove the power supply and all accessories from the packaging. Verify that all components listed in the packing list are present: DC power supply unit, EU power adapter, 1 black output cable, 1 red output cable, instruction manual, and protective sponges.
  2. Power Connection: Connect the provided EU power adapter to the AC power input on the rear panel of the power supply. Plug the other end into a suitable grounded AC power outlet.
  3. Initial Power On: Flip the main power switch (usually located on the front or rear panel) to the 'ON' position. The display should illuminate.
  4. Output Cable Connection: Connect the red output cable to the positive (+) terminal and the black output cable to the negative (-) terminal on the front panel. Ensure a secure connection. The green terminal is for grounding the load if required.

6. Operating Instructions

This section details the primary functions and operational procedures for your NANKADF DC Power Supply.

6.1 Setting Voltage and Current

The power supply features encoder adjustment for precise setting of voltage and current. The set values can be displayed in advance before activating the output.

Diagram illustrating high-precision encoder adjustment for TPS series. Pressing the knob switches the digit position, turning it sets the value.
Figure 6.1: High-Precision Encoder Adjustment (TPS Series)
Diagram illustrating upgrade encoder adjustment for DPS3010U. Shows clicking the knob to switch digits and turning it to set the value, with coarse and fine adjustments.
Figure 6.2: Encoder Adjustment (DPS Series)
  1. Select Parameter: For models with a Voltage/Current switching button (e.g., TPS series), press it to select whether you are adjusting voltage or current. For models with separate coarse/fine adjustment knobs (e.g., DPS series), simply use the respective knobs.
  2. Adjust Value: Rotate the Voltage/Current adjustment knob (or encoder knob) to change the desired value. For encoder models, press the knob to cycle through the digits (e.g., units, tenths, hundredths) and then rotate to set the value for that digit.
  3. Fine-tuning: Some models (e.g., DPS series) have separate coarse and fine adjustment knobs for more precise control.

6.2 Activating Output

After setting the desired voltage and current, activate the output using the 'Output' or 'OUT' button.

Diagram showing the 'OUT' button for one-touch output function and 'OCP' for short-circuit protection on a WPS series power supply.
Figure 6.3: Output and OCP Buttons (WPS Series)
  • Press the Output or OUT button to enable the power output to your connected load. The OUT indicator will illuminate.
  • Press it again to disable the output.

6.3 Over Current Protection (OCP)

The OCP function protects your load from excessive current. When OCP is enabled and the output current exceeds the set limit, the output will stop.

Diagram illustrating multiple protection functions for TPS series, including key lock, OCP overcurrent protection, and Output Enable/Disable button.
Figure 6.4: Multiple Protection Functions (TPS Series)

Video 6.1: Product demonstration showing programmable encoder adjustment, OCP mode, USB fast charging, and powering a fan.

  1. Enable OCP: For some models (e.g., WPS series), long press the current adjustment knob for 3 seconds to turn on OCP mode. The OCP indicator will illuminate. For other models (e.g., TPS, EPS, TPS-C series), there might be a dedicated OCP button or switch.
  2. Set OCP Limit: The OCP limit is typically set by the current adjustment knob. Ensure the desired current limit is set before enabling OCP.
  3. OCP Triggered: If the output current exceeds the set OCP limit, the power supply will cut off the output, and the OCP indicator will flash or remain lit.
  4. Reset OCP: To reset, turn off the output, resolve the overload condition, and then turn the output back on.

6.4 USB Fast Charging

Many NANKADF DC Power Supply models include USB-A and/or USB-C fast charging ports.

Diagram showing a USB fast charging port with display, indicating 18W output and real-time voltage/current display while charging a phone.
Figure 6.5: USB Fast Charging Port with Display
Image highlighting the USB-A and USB-C dual fast charging ports on a DPS series power supply.
Figure 6.6: Dual USB-A + USB-C Fast Charging Ports (DPS Series)
  • Connect your compatible device to the USB-A or USB-C port on the front panel.
  • The power supply's display may show the voltage and current being drawn by the USB-connected device.
  • These ports support various fast charging protocols for efficient and stable output.

6.5 Memory Storage Function (for applicable models like EPS, TPS-C)

Some models allow you to save and recall frequently used voltage and current settings.

Diagram illustrating three sets of data storage functions for EPS series. Long press M1/M2/M3 to save, short press to recall.
Figure 6.7: Three Sets of Data Storage Functions (EPS Series)
  1. Save Preset: Set the desired voltage and current using the adjustment knobs. Long press one of the memory buttons (M1, M2, or M3) for a few seconds until an indicator confirms the setting is saved.
  2. Recall Preset: Short press the desired memory button (M1, M2, or M3) to recall the stored voltage and current values.

6.6 Buzzer Function (for applicable models)

Some models may have an audible buzzer for alerts or confirmations.

Diagram showing how to turn off the buzzer function by pressing and holding the voltage knob for 3 seconds.
Figure 6.8: Turning Off the Buzzer Function
  • To turn the buzzer ON/OFF, press and hold the voltage adjustment knob for approximately 3 seconds.

7. Maintenance

  • Cleaning: Regularly clean the exterior of the power supply with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure ventilation openings are free from dust and debris.
  • Ventilation: Always ensure adequate airflow around the unit. Do not block the cooling fan or ventilation grilles.
  • Fuse Replacement: If the power supply does not turn on, the fuse may need replacement. Disconnect the power cord before attempting to replace the fuse. The fuse holder is located on the rear panel. Use only fuses of the specified type and rating.
  • Storage: When not in use for extended periods, store the power supply in a cool, dry place, away from direct sunlight and extreme temperatures.

8. Troubleshooting

ProblemPossible CauseSolution
No power/Display offPower cord not connected; Power switch off; Blown fuse; Power outlet fault.Check power cord connection; Ensure power switch is ON; Check and replace fuse if necessary; Test power outlet with another device.
No output voltage/currentOutput button OFF; OCP triggered; Load disconnected or faulty; Output cables faulty.Press the Output/OUT button to enable output; Check OCP indicator and reset if triggered; Verify load connection and functionality; Inspect output cables for damage.
OCP indicator lit/flashingOutput current exceeds set limit; Short circuit in load.Reduce load current or increase OCP limit; Check load for short circuits; Turn off output, resolve issue, then turn output back on.
Inaccurate readingsPoor connection; Calibration needed (rarely).Ensure all connections are secure; If persistent, contact support for calibration advice.
Fan not running or too loudLow load/temperature (fan off); Blocked vents; Fan fault.Fan operates based on temperature, may not run at low loads; Clear any obstructions from vents; If fan is excessively loud or never runs under load, contact support.

9. User Tips

  • Pre-set Values: Always set your desired voltage and current values before enabling the output to prevent accidental over-voltage or over-current to your sensitive components.
  • OCP for Protection: Utilize the Over Current Protection (OCP) feature, especially when working with new or sensitive circuits, to prevent damage in case of a short circuit or excessive current draw.
  • Memory Presets: For repetitive tasks, use the memory storage function (M1, M2, M3) to quickly recall frequently used voltage and current settings, saving time and ensuring consistency.
  • USB Charging: The integrated USB-A and USB-C ports are convenient for charging mobile devices or powering small USB-powered gadgets directly from the power supply.
  • Cable Management: Keep your workspace tidy and ensure output cables are not tangled or stressed to maintain good connections and prevent accidental disconnections.

10. Warranty and Support

NANKADF products are designed for reliability and performance. For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact your retailer. In case of technical issues or questions not covered in this manual, please reach out to NANKADF customer support or your authorized service center for assistance.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.