1. Introduction
The JIKONG JK-B2A8S20P is a state-of-the-art Smart Battery Management System (BMS) designed for optimal performance and safety of LiFePO4, Li-ion, and LTO battery packs. Equipped with an industry-leading high-performance MCU and integrated with a new intelligent firmware architecture, this BMS achieves millisecond-level response, precise data processing, and enhanced system stability. It provides comprehensive protection and active balancing for your battery system, making it suitable for a wide range of power and energy storage applications.

Figure 1: JIKONG JK-B2A8S20P Smart BMS overview
2. Product Features
The JIKONG JK-B2A8S20P Smart BMS offers a robust set of features for advanced battery management:
- Advanced MCU & Firmware: Utilizes a powerful MCU and the latest firmware version for superior processing and stability.
- Active Balancing: Features full-time active balancing with 2A current for lossless energy redistribution, significantly improving system energy efficiency and battery life.
- Comprehensive Protection: Includes Overcharge Protection, Over Discharge Protection, Overcurrent Protection, Short Circuit Protection, and Temperature Protection.
- Wide Compatibility: Supports Li-ion, LiFePO4, and LTO battery types with 3S to 8S configurations.
- Communication Interfaces: Equipped with RS485, CAN, APP (Bluetooth), and NTC interfaces. Supports multi-terminal interconnection with APP, PC, and LCD touch screens.
- Real-time Monitoring: Provides real-time data monitoring for voltage, temperature, State of Charge (SOC), and dynamic parameter configuration.
- Firmware Upgrades: Supports OTA remote upgrades and error rollback mechanisms for efficient maintenance.
- Robust Design: Constructed with a high-precision aluminum alloy die-casting process for durability and effective cooling.
- Parallel Connection Support: Designed to support parallel battery pack connections.

Figure 2: Key features of the JIKONG Smart Active Balance BMS
Product Advantages
| Feature | Description |
|---|---|
| Battery Status Monitoring | Supports higher-precision monitoring, increases compatibility with more sensors, improves the accuracy of battery status monitoring, and enhances safety. |
| SOC Calculation Algorithm | Upgraded V19 improved version with more accurate power estimation, especially performing better under light load temperature changes. |
| Intelligent Balancing | Optimizes the balancing strategy, shortens balancing time, and improves battery pack consistency. |
| Fault Diagnosis and Protection | Adds multi-level protection strategies, supports fault code recording and traceability, and facilitates smarter fault handling. |
| Communication Protocol Support | Supports CANopen, Modbus extension, Bluetooth/OTA, with strong scalability for remote upgrades and monitoring. |
| Firmware Upgrade Mechanism | Supports OTA remote upgrades and error rollback mechanisms to improve maintenance efficiency and reduce downtime. |
| Logging and Data Recording | Expands data log cache and supports diagnostic export for problem tracing. |
| Security Design | Adds firmware encryption, anti-tampering, and authentication to strengthen BMS protection capabilities. |
Table 1: Product Advantages
3. Package Contents
Upon opening the package, please verify that all items are present and in good condition:
- 1x JIKONG Smart BMS (JK-B2A8S20P)
- 1x Sampling Line Harness (long 70cm)
- 1x NTC Temperature Sensor (long 40cm)
- 1x Control Switch (long 50cm)
- 1x Set of Screws/Fasteners
- 1x Packaging Box

Figure 3: Package Contents
Video 1: Product Unboxing and Overview
4. Installation and Wiring
Proper installation and wiring are crucial for the safe and effective operation of your JIKONG Smart BMS. Please follow these steps carefully:
- Connect Main Power Cables: First, securely weld or connect the B- (battery negative), P- (load/charger negative), and B+ (battery positive) cables to the designated terminals on the BMS.
- Connect Sampling Cable: Insert the battery sampling cable (balance wires) into the BMS connector. Ensure the cables are connected in order from the lowest cell voltage to the highest cell voltage.
- Power On and Activate: After all cables are correctly connected, power on the battery system. The BMS should activate. Verify all connections are secure.
- Connect Load and Charger: Once the BMS is active and functioning correctly, connect your load and charger to the system.
- Disassembly Procedure: When disassembling the system, always follow this order: first disconnect the charger and load, then unplug the battery sampling cable (from highest cell to lowest cell), and finally disconnect B+, P+, and B-.

Figure 4: General Wiring Diagram

Figure 5: Detailed Wiring Method for 4-String Cells
5. Operating Instructions
The JIKONG Smart BMS offers multiple ways to monitor and configure your battery system:
5.1 Mobile App (Android/iOS/HarmonyOS)
The dedicated JIKONG BMS app provides cross-platform access for real-time data monitoring and parameter configuration. Scan the QR code on the BMS unit or visit WWW.JK-BMS.COM to download the official app.
- Real-time Data: Monitor battery voltage, individual cell voltages, temperature, SOC, current, and alarm status.
- Dynamic Parameter Configuration: Adjust various BMS parameters directly from your smartphone.
- Multi-level Alarms: Receive push notifications for critical battery events.
- Multi-language Support: The app integrates multi-language switching modules for global usage.

Figure 6: JIKONG Smart App Interface
5.2 PC Software
For more comprehensive functions and setting calibration, the BMS can be intelligently interconnected with a host PC using communication cables (UART/RS485/CAN). This allows for real-time viewing of all data and supports firmware updates.
- Detailed Monitoring: View multiple information such as voltage, current, temperature, and number of strings with a single click.
- Advanced Configuration: Access and adjust advanced parameters.
- Firmware Management: Perform firmware version updates and upgrades.

Figure 7: PC Intelligent Interconnection
5.3 External Displays
The JIKONG BMS supports external LCD touch screens for convenient monitoring without a smartphone or PC.
- 2.5-inch Display: Short press to turn the screen on/off. Long press to turn the BMS on/off.
- 3.2-inch Display: Long press to turn the BMS on/off.

Figure 8: JIKONG 2.5 inch Display

Figure 9: JIKONG 3.2 inch Display
6. Maintenance
To ensure the longevity and optimal performance of your JIKONG Smart BMS, consider the following maintenance tips:
- Regular Inspection: Periodically check all wiring connections for tightness and signs of corrosion or damage.
- Keep Clean: Ensure the BMS unit is kept clean and free from dust and debris. Avoid exposure to excessive moisture or extreme temperatures.
- Monitor App Data: Regularly check the mobile app or PC software for any unusual readings, error codes, or warnings. Address any anomalies promptly.
- Firmware Updates: Keep the BMS firmware updated to the latest version to benefit from performance improvements and new features. Updates can typically be performed via the app or PC software.
- Environmental Conditions: Operate the BMS within its specified temperature and humidity ranges to prevent damage.
7. Troubleshooting
If you encounter issues with your JIKONG Smart BMS, refer to the following common problems and solutions:
- BMS Not Activating:
- Ensure all main power cables (B-, P-, B+) and the sampling cable are correctly and securely connected.
- Verify that the sampling cable is inserted in the correct order (low to high cell voltage).
- Check the battery voltage to ensure it is within the operating range.
- No Bluetooth Connectivity:
- Confirm that the JIKONG BMS app is installed on your Android, iOS, or HarmonyOS device.
- Ensure Bluetooth is enabled on your device and the BMS.
- Try restarting both the BMS (if possible via the switch) and your mobile device.
- Make sure you are within Bluetooth range of the BMS.
- Incorrect Readings on App/Display:
- Double-check all sampling wire connections for proper seating and order.
- Verify that the NTC temperature sensors are correctly installed and not damaged.
- Perform a calibration if available in the app/PC software.
- Overcurrent/Overvoltage/Undervoltage Protection Triggered:
- Reduce the load or charging current if an overcurrent event occurs.
- Check the charger voltage if overvoltage protection is triggered.
- Ensure the battery cells are not discharged too low if undervoltage protection is triggered.
- Consult the app for specific alarm codes and their meanings.
- External Display Not Working:
- Ensure the display cable is securely connected to the BMS.
- For 2.5-inch displays, short press the button to turn on the screen. For both 2.5-inch and 3.2-inch displays, long press the button to turn on the BMS if it's off.
For persistent issues, please refer to the official JIKONG BMS website (WWW.JK-BMS.COM) or contact customer support.
8. Specifications
Detailed technical specifications for the JIKONG JK-B2A8S20P Smart BMS:
| Attribute | Value |
|---|---|
| Brand Name | JIKONG |
| Model | JK-B2A8S20P |
| Type | Li-ion / LiFePO4 / LTO Battery BMS |
| Battery Strings (Li-ion) | 3S~8S |
| Battery Strings (LiFePO4) | 4S~8S |
| Battery Strings (LTO) | 6S~8S |
| Balance Function | Active Balanced BMS |
| Balance Current | 2A |
| Charging Current | 200A |
| Continuous Discharge Current | 200A |
| Maximum Discharge Current | 300A |
| Charge and Discharge Port | Common Port BMS |
| Protection Functions | Overcharge, Over Discharge, Overcurrent, Short Circuit, Temperature Protection |
| Supported Interfaces | RS485, CAN, APP (Bluetooth), UART, HEAT |
| Adapting System | Android, iOS, HarmonyOS, PC |
| Usage Scenario | Power BMS, Energy Storage BMS |
| Certification | CE, FCC, RoHS, UL |
| Origin | Mainland China |
| Dimensions (L x W x H) | 126mm x 153mm x 17.6mm (approx.) |
| Voltage Acquisition Accuracy | ±5mV |
| Over Charge Protection Voltage | 1.2-4.35V (Adjustable) |
| Over Discharge Protection Voltage | 1.2-4.35V (Adjustable) |
| Quantity of Temperature Detection | Two groups |
| Inverter Link and Communication | Support |
| Other Features | Heating Function, Support Parallel Connection, Coulomb Counter |
Table 2: Product Specifications

Figure 10: Product Specification and Dimensions
9. User Tips
Based on common user inquiries and experiences, here are some helpful tips for using your JIKONG Smart BMS:
- Bluetooth Connectivity: The BMS supports Bluetooth connectivity to Android, iOS, and HarmonyOS phones. Ensure the official JIKONG app is installed and Bluetooth is enabled on your device for seamless monitoring and control.
- Cables Included: The package typically includes the necessary sampling lines for connecting to your battery cells. Always connect these wires in the specified low-to-high voltage order.
- Compatibility with LiFePO4: This BMS is compatible with 4-string (4S) LiFePO4 batteries, including 100A 3.2V cells. Verify your battery configuration matches the BMS specifications.
- External Display Support: The BMS features a dedicated port for connecting external displays, such as the 2.5-inch or 3.2-inch screens shown in the product images. These displays offer convenient, at-a-glance monitoring of battery status.
- Wiring Order: Always adhere strictly to the recommended wiring order for both installation and disassembly to prevent damage to the BMS or battery.
10. Warranty and Support
JIKONG is committed to providing high-quality products and customer satisfaction. Your JIKONG Smart BMS is backed by:
- Free Returns: Enjoy free returns within 90 days of purchase.
- Fast Delivery & Refunds: Benefit from fast delivery services. In case of delays, lost packages, or damaged items, appropriate refunds or compensation may be provided.
- Certified Original: This product is certified original, ensuring authenticity and quality.
- Security & Privacy: Your personal details are protected and not shared with third parties without your consent.
For technical support, troubleshooting assistance, or warranty claims, please visit the official JIKONG BMS website at WWW.JK-BMS.COM or contact your retailer.