Introduction
This manual provides essential information for the safe and efficient use of your LiitoKala 12V LiFePO4 battery. Please read this manual thoroughly before installation and operation to ensure optimal performance and longevity of your battery. LiFePO4 batteries offer superior cycle life, enhanced safety, and a wider operating temperature range compared to traditional lead-acid batteries.
Safety Guidelines
- Do not disassemble, crush, puncture, or short-circuit the battery.
- Keep the battery away from fire, heat sources, and direct sunlight.
- Do not immerse the battery in water or other liquids.
- Use only compatible chargers designed for LiFePO4 batteries.
- Ensure proper ventilation during charging and discharging.
- Wear appropriate personal protective equipment (PPE) such as gloves and eye protection when handling batteries.
- Avoid connecting batteries in series or parallel without consulting the manufacturer's guidelines or a qualified professional.
- In case of fire, use a Class D fire extinguisher. Water can exacerbate LiFePO4 fires.
Product Overview
The LiitoKala 12V LiFePO4 battery is a high-performance, long-lasting power solution suitable for a wide range of applications. It features a robust built-in Battery Management System (BMS) for optimal safety and performance.

Figure 1: General view of the LiitoKala 12V LiFePO4 Battery.
Integrated Battery Management System (BMS)
The advanced BMS integrated into your LiitoKala battery provides comprehensive protection, ensuring safe and reliable operation:
- Overcharge Protection: Prevents the battery from being charged beyond its safe voltage limit.
- Over-discharge Protection: Stops discharge when the battery voltage drops below a safe level, protecting cell longevity.
- Overcurrent Protection: Safeguards against excessive current draw that could damage the battery or connected devices.
- Short Circuit Protection: Automatically disconnects the battery in case of a short circuit.
- Temperature Protection: Monitors battery temperature and prevents operation outside safe temperature ranges (0°C to 45°C for charging, -20°C to 60°C for discharging).
- Overvoltage Protection: Ensures the battery operates within safe voltage parameters.
Setup and Installation
Unpacking and Inspection
- Carefully remove the battery from its packaging.
- Inspect the battery for any visible damage. If damage is found, do not use the battery and contact customer support.
- Verify that all components listed in the package contents are present.
Connecting the Battery
- Ensure all loads are disconnected before connecting the battery.
- Connect the positive (+) terminal of the battery (red) to the positive (+) terminal of your system.
- Connect the negative (-) terminal of the battery (black) to the negative (-) terminal of your system.
- Use appropriate gauge cables and connectors for your application to prevent overheating and ensure efficient power transfer.
- Tighten all connections securely to prevent loose connections and arcing.

Figure 2: Battery terminals for connection.
Initial Charge
It is recommended to fully charge the battery before its first use. Use a LiFePO4 compatible charger with a maximum charging current of 20A.
Operating the Battery
Charging
- Always use a charger specifically designed for LiFePO4 batteries.
- The maximum charging voltage is 14.6V.
- The maximum charging current is 20A. Exceeding this can damage the battery.
- Charge the battery within the recommended temperature range of 0°C to 45°C.
Discharging
- The continuous discharge current is 200A (for 3 seconds instantaneous).
- The instantaneous discharge current is 100A.
- Do not discharge the battery below 10.0V to prevent damage. The built-in BMS will protect against over-discharge.
- Discharge the battery within the recommended temperature range of -20°C to 60°C.
Special Features (DC-12V150Ah and DC-12V200Ah models)
Certain models, such as the DC-12V150Ah and DC-12V200Ah, include additional integrated functionalities:
- LED Power Display: Provides real-time battery status.
- Integrated Switch: For convenient power control.
- XLR 3PIN Input: Supports charging with 14.6V 5A via XLR connector.
- 12V On-board Function: Allows direct connection to 12V accessories.
- Output Ports: Includes DC5.5*2.1/2 5A, USB3.0/1 18W, and PD-Type C 3.0:18W for versatile device charging.

Figure 3: Features of DC-12V200Ah model, including LED display and multiple output ports.

Figure 4: Features of DC-12V150Ah model, highlighting integrated power management.
Maintenance and Storage
General Maintenance
- Keep the battery terminals clean and free from corrosion.
- Regularly check cable connections for tightness.
- Avoid physical impact or dropping the battery.
Long-Term Storage
- For long-term storage, charge the battery to approximately 50-70% of its capacity.
- Store the battery in a cool, dry place, away from direct sunlight and extreme temperatures (-20°C to 65°C).
- Periodically check the battery voltage during storage and recharge if it drops significantly.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Battery not charging | Incorrect charger; loose connections; charger malfunction; BMS protection activated. | Ensure correct LiFePO4 charger is used. Check all cable connections. Test charger. If BMS is active (e.g., due to over-discharge), a specialized charger might be needed to reactivate. |
| Battery not discharging/no power output | BMS protection activated (over-discharge, overcurrent, short circuit); loose connections; faulty load. | Check battery voltage (should be above 10.0V). Inspect connections. Disconnect and reconnect the load. If BMS is active, try charging to reset. |
| Reduced capacity or runtime | Aging battery; extreme operating temperatures; consistent deep discharge. | Ensure operating within recommended temperature ranges. Avoid frequent deep discharges. Consider battery replacement if cycle life is exceeded. |
| Battery overheating | Overcharging; excessive discharge current; poor ventilation. | Verify charger settings. Reduce load. Ensure adequate airflow around the battery. Discontinue use if overheating persists and contact support. |
Specifications
| Feature | Detail |
|---|---|
| Brand | LiitoKala |
| Battery Type | LiFePO4 |
| Nominal Voltage | 12.8V |
| Nominal Capacity | 40Ah, 60Ah, 100Ah, 120Ah, 150Ah, 200Ah, 300Ah (model dependent) |
| Operating Voltage Range | 10.0V - 14.6V |
| Maximum Charging Current | 20A |
| Instantaneous Discharge Current | 100A |
| Continuous Discharge Current | 200A (3 seconds) |
| Cycle Life | 4000 cycles or more |
| Charging Temperature | 0°C ~ 45°C |
| Discharge Temperature | -20°C ~ 60°C |
| Storage Temperature | -20°C ~ 65°C |
| Overload Protection Voltage | 14.6V ± 0.05V |
| Over-discharge Protection Voltage | 10.0V ± 0.05V |
| Battery Temperature Protection | 60°C ± 5°C |
| Output Terminals | High current positive / negative connection column (red positive, black negative) |
Physical Dimensions and Weight (Approximate)
| Battery Capacity | Battery Weight | Battery Size (L*W*H) |
|---|---|---|
| 12.8V40Ah | 4.00 kg | 267*77*172mm |
| 12.8V60Ah+LCD | 5.00 kg | 260*168*210mm |
| 12.8V100Ah+LCD | 10.00 kg | 330*170*220mm |
| 12.8V120Ah+LCD | 12.00 kg | 330*170*220mm |
| 12.8V150Ah+LCD | 15.00 kg | 340*180*226mm |
| FBK-12.8V150Ah+LCD | 13.00 kg | 330*310*148mm |
| 12.8V200Ah+LCD | 18.00 kg | 355*245*180mm |
| 12.8V300Ah+LCD | 24.00 kg | 355*245*180mm |

Figure 5: Detailed specifications for various battery capacities.
User Tips
- For optimal performance, avoid consistently pushing the battery to its maximum discharge limits.
- If your model includes an LCD display, monitor the battery status regularly to understand its charge and discharge cycles.
- When using the integrated USB or Type-C ports (on applicable models), ensure your devices are compatible with the provided output specifications (e.g., 18W for USB3.0/PD-Type C 3.0).
- Consider the total power draw of your connected devices to ensure it does not exceed the battery's continuous discharge current.
Warranty and Support
For warranty information, technical support, or any questions not covered in this manual, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.