1. Overview
The JIKONG intelligent protection board for lithium batteries is a comprehensive management system designed for large-capacity series lithium battery packs. It integrates various essential functions including voltage acquisition, high current active balance, overcharge protection, over-discharge protection, overcurrent protection, over-temperature protection, coulomb counting, Bluetooth communication, and optional GPS remote functionality. This BMS is compatible with LiFePo4, ternary lithium, and other battery types.
Utilizing energy transfer active balance technology with independent intellectual property rights, the protection board achieves a maximum continuous 2A balance current. This high-current active balance capability ensures battery consistency, extends battery life, and significantly delays battery aging.
The protection board features a supporting mobile application compatible with both Android and iOS operating systems. The app connects to the protection board via Bluetooth, allowing users to monitor battery working status, modify operating parameters, and control charging/discharging switches. Its compact size, simple operation, and extensive functionality make it suitable for a wide range of applications, including small sightseeing buses, scooters, shared cars, high-power energy storage systems, base station standby power supplies, and solar power stations.

2. Specifications
The main technical indicators of the JIKONG V19 Smart BMS are detailed below:
| Feature | Specification |
|---|---|
| Brand Name | jikong |
| Type | LIFEPO4 Battery BMS |
| Handware or Smart | SMART BMS |
| Balance Function | Active Balanced BMS |
| Charging Current | 300A (Max) |
| Usage Scenario | Power BMS, 3C Digital BMS |
| Charge and Discharge Port | Common Port BMS |
| Function | Overcharge Protection, Over Discharge Protection, Overcurrent Protection, Short Circuit Protection |
| Certification | CE, FCC, RoHS |
| High-concerned chemical | None |
| Operating Temperature Range | -20 °C to 70 °C |
| Power Requirements | 40 ~ 100V |
| Power Consumption (Balanced) | 10mA @ 100V |
| Power Consumption (Unbalanced) | 6mA @ 100V |
| Single Voltage Range | 1~5 V |
| Voltage Acquisition Accuracy | ±5 mV |
| Overcharge Protection Voltage | 1.2~4.35 V adjustable |
| Overcharge Release Voltage | 1.2~4.35 V adjustable |
| Discharge Time of Charging | 2~120S adjustable |
| Over Discharge Protection Voltage | 1.2~4.35 V adjustable |
| Over Discharge Recovery Voltage | 1.2~4.35 V adjustable |
| Number of Temperature Sensors | 3 |
| Temperature Protection | Yes |
| Short Circuit Protection | Yes |
| Coulomb Meter | Yes |
| Bluetooth Function | Support Android and iOS |
| GPS Remote (Optional) | RS485/GPS |

3. Package Contents
The JIKONG V19 Smart BMS package typically includes the following items:
- BMS Unit
- Operating Manual
- Connection Wires (70cm)
- NTC Temperature Sensor (40cm)
- Switch (50cm)
- Mounting Screws (x6)
- Pack Box

4. Installation and Setup
4.1 Unpacking Inspection and Precautions
- Handle the packing box and the protection board with care; avoid inverting the box if possible.
- Before unpacking, inspect the package for any signs of impact marks, damage, or other issues.
4.2 Wiring Diagram
The JIKONG intelligent lithium battery protection board is suitable for 13-24 series lithium battery packs. The wiring method varies depending on the number of battery strings. Below is a general wiring diagram. For specific diagrams tailored to different string counts (e.g., 24S, 23S, 22S, 21S, 20S, 19S, 18S, 17S, 16S, 15S, 14S, 13S), please refer to the comprehensive user manual PDF.

Connector and LED Definition:
The protection board features various connectors and an LED indicator. The positions of these are shown in the product images. Key connectors include:
- B-: Total battery negative.
- P-: Connects to external load or charger negative.
- B1-B24: Cell positive connections (B1 for Cell 1 Positive, B2 for Cell 2 Positive, etc.).
- P3 (Temperature Sensor): Pins for 1st and 2nd temperature sensors (T1A, T1B, T2A, T2B).
- P4 (External GPS/RS485): Interface for external GPS or RS485 converter.
- P5 (External CAN): Interface for external CAN converter.
- D1 (Bluetooth Indicator): Always on when connected to Bluetooth, blinks when disconnected.

4.3 App Installation
The JIKONG BMS is controlled via a mobile application. You can obtain the app by searching for "JIKONG BMS" in the Apple App Store (for iOS) or "JK BMS" in the Google Play Store (for Android). Alternatively, scan the QR code below to access the app download link.

5. Operation
5.1 Preparation and Inspection Before Use
Before powering on the protection board, ensure the balance lines are correctly connected and that the 'C-' and 'B-' terminals are properly wired. Verify that the protection board is securely fixed to the battery pack. Only after confirming all connections are correct should you power on the board. Incorrect connections can lead to abnormal operation or even burnout.
5.2 Power On of Protection Board
Once all preparations are confirmed, you can power on the protection board. The board does not have a physical power-on switch; it activates in a charging activation mode. This means that after assembling the battery, a charger must be connected to initiate the protection board. The charger voltage needs to be at least 5V higher than the battery pack voltage for activation.
5.3 App Operating Instructions
a) Equipment Connection:
- Enable Bluetooth on your mobile phone.
- Open the JIKONG BMS application.
- Click the icon in the upper left corner of the app to scan for devices.
- Select your device (e.g., "JK-B1A24S") from the list to connect.
- The app will prompt for a password on the first connection. The default password is "1234". The app will automatically save the password for future connections.
b) Change Name and Password:
After connecting, click the "pen type" icon next to the device name in the device list to modify its name and password. Device names can only contain English letters or numbers. To change the password, you must first enter the old password. Only if the old password is correct will you be prompted to enter a new password. Enter the new password twice and click 'OK' to confirm.
c) Status View:
The real-time status interface provides comprehensive battery information, including:
- Time: Total running time since the protection board was powered on.
- Charging Status: Indicates if the charging MOS is 'on' (charging allowed) or 'off' (charging not allowed).
- Discharge Status: Indicates if the discharge MOS is 'on' (discharging allowed) or 'off' (discharging not allowed).
- Balance Status: Indicates if balancing is 'On' (automatic balancing when conditions met) or 'Off' (balancing disabled).
- Voltage: Displays the total battery voltage (sum of all cell voltages).
- Current: Displays the total current (positive for charging, negative for discharging).
- Battery Power: Current power output/input (product of voltage and absolute current).
- Remain Battery: Percentage of remaining battery power.
- Battery Capacity: Actual battery capacity in AH (updates after a full discharge and charge cycle).
- Remain Capacity: Remaining capacity in AH.
- Cycle Capacity: Cumulative discharge capacity in AH.
- Cycle Count: Number of charge saturation times.
- Ave. Cell Vol.: Average cell voltage in V.
- Delta Cell Vol.: Difference between highest and lowest cell voltages in V.
- Balance Cur.: Real-time balance current in A when balancing is active.
- MOS Temp: Temperature of the protection board's power MOS in °C.
- Battery T1/T2: Real-time temperature from temperature sensors (displays "NA" if not installed).
The status view also shows individual cell voltages (red for lowest, blue for highest) and cell wire resistance (yellow if exceeding a certain value, indicating potential connection issues).
d) Parameter Setting:
The parameter setting page allows modification of various working parameters. Always refer to the manual for correct values, as improper settings can cause malfunction or damage. After modifying any parameter, click the "small aircraft" icon to apply the changes. The BMS will emit a "drip" sound upon successful parameter reception.
- LIFEPO4/LI-ION: Buttons to load default parameters for specific battery types.
- Cells Count: Set the exact number of cells in your battery pack.
- Battery Capacity: Design capacity of the battery.
- Trigger Diff Volt: Voltage difference threshold for initiating/ending active balancing.
- Voltage Calibration: Calibrate the voltage acquisition accuracy.
- Cell UVP/UVPR (Under Voltage Protection/Recovery): Cut-off voltage and recovery voltage for individual cells.
- Cell OVP/OVPR (Over Voltage Protection/Recovery): Saturation voltage and recovery voltage for individual cells.
- Power Off Vol.: Lowest working voltage for the protection board.
- Max Charge Curr./OCP Delay/OCPR Time (Overcurrent Protection): Maximum charging current, delay before overcurrent protection, and recovery time.
- SCPR Time (Short Circuit Protection Recovery): Time before short-circuit protection is released.
- Max Balance Cur.: Maximum continuous balance current.
- Charge OTP/OTPR (Over Temperature Protection/Recovery): Temperature thresholds for charging over-temperature protection and recovery.
- Charge UTP/UTPR (Under Temperature Protection/Recovery): Temperature thresholds for charging under-temperature protection and recovery.
- MOS OTP/OTPR (MOS Over Temperature Protection/Recovery): Temperature thresholds for MOS over-temperature protection and recovery.
e) BMS Control:
The BMS control page allows you to toggle the charging, discharging, and balancing functions on or off. You can also power off the protection board or restore factory settings from this interface.

6. Safety Protection Measures and Precautions
- The protection board itself operates at low voltage and does not pose a risk of electric shock.
- Always read the instruction manual carefully and follow the correct wiring diagrams for your specific string configuration. Connect wires from the negative pole to the positive pole.
- After connecting the balance wires, use a multimeter to confirm all connections before inserting the protection board.
- Do not modify the power lines of the protection board without authorization. Unauthorized modifications can lead to overcurrent and damage the board.

7. Transportation and Storage
7.1 Transport
The packaged product is designed to withstand normal transportation conditions, including rain, snow, and minor bumps. It should not be transported with acid, alkali, or other corrosive substances.7.2 Storage
Store the packaged product in a permanent warehouse with a temperature range of 0 °C to 35 °C and a relative humidity not exceeding 80%. The storage area should be free from acid, alkali, corrosive gases, strong mechanical vibration, shock, and strong magnetic fields.
8. Troubleshooting (FAQ)
Common issues and their solutions:
- BMS Does Not Turn On:
- Ensure the last "B+" line of the cable is connected to the positive pole of the battery.
- Activate the BMS by charging; the charger voltage must be at least 4V higher than the battery pack voltage.
- Verify that the charger has voltage output.
- Inaccurate Voltage Readings:
- Measure the actual total battery pack voltage with a multimeter.
- Use the "voltage calibration" feature on the parameter setting page in the app to input the correct total voltage.
- Inaccurate Current Readings:
- Ensure both B- and P- terminals of the protection board, which are 7AWG wires, are connected in parallel to avoid current errors.
- Measure the actual current of the battery pack with a clamp meter.
- Input the actual current into the "current calibration" setting in the app. Higher actual current during calibration leads to better accuracy.
- Inaccurate Capacity Readings:
- The initial capacity displayed when the BMS is first powered on is an estimate based on monomer voltage and may be inaccurate.
- For accurate calibration, fully discharge the battery pack to its cut-off voltage, then fully charge it without interruption. The capacity will be calibrated during this process.
- Designed String Number Inconsistent with Actual:
- Check and correct the "unit quantity" setting in the app's parameters.
- If there is no voltage reading for two or more strings in the middle of the pack, inspect the acquisition cable for any disconnections.
9. User Tips
- Always ensure the main positive pole of the battery pack is connected to the last 'B+' line of the balance cable for proper operation.
- For initial startup, the total voltage of the battery pack must be greater than 20V (for default BMS) or 10V (for 4S BMS).
- Activate the BMS using either the display activation button or an additional switch.
- When setting parameters for the first time, the default password is '123456'. After initial setup, you can change this password.
- After setting parameters, always return to the real-time status page to confirm normal operation. The app uses blue to indicate the highest cell voltage and red for the lowest.
- If your model includes heating functionality, note that the heating interface requires an external heating film or charger. The green cable connects to the heating film, while red and black cables connect to the charger. Maximum heating power is 3A, and maximum heating voltage is 100V.
10. Warranty and Support
This JIKONG Smart BMS product comes with a warranty period of one year from the date of purchase.
For detailed item guides, additional documents, and comprehensive wiring diagrams for various string configurations, please refer to the official user manual PDF available at: JIKONG BMS User Manual (PDF).