1. Introduction
The JIKONG V19 Inverter Smart BMS (Battery Management System) is a sophisticated management system designed for large-capacity series lithium battery packs. It offers comprehensive features including voltage acquisition, high-current active balancing, overcharge and over-discharge protection, over-temperature protection, coulomb metering, Bluetooth communication, and host computer monitoring. This BMS is compatible with various battery types, including LiFePo4, ternary lithium (Li-Ion), and lithium titanate (LTO) batteries.
The protection board utilizes energy transfer active balancing technology with independent intellectual property rights, achieving a maximum continuous 1A/2A balance current. This high-current active equalization ensures battery consistency, extends battery range, and delays battery aging.
A mobile APP, compatible with Android and iOS operating systems, allows users to connect via Bluetooth to monitor battery status, modify working parameters, and control charge/discharge switches. Its compact size, simple operation, and full functionality make it ideal for high-power energy storage, base station backup power supplies, and solar power station battery packs.
Video: JIKONG Active Balance BMS demonstrating cell voltage balancing and smart management features.
2. Key Features
- LED Bluetooth status indicator
- APP Bluetooth remote operation
- Battery capacity calculation
- Supports PC operations
- High precision voltage acquisition (±3mV)
- High precision current acquisition
- Support information screen display
- Accurate time logging
- Support RS485 communication
- Support CAN communication
- Support heating function
- Alarm dry contact function
- Charge overcurrent protection
- Charge overvoltage protection
- Charge over temperature protection
- Low temperature protection during charge
- Discharge overcurrent protection
- Discharge undervoltage protection
- Discharge over temperature protection
- Short circuit protection
- Battery parallel current limiting function
3. Specifications
3.1 General Specifications
| Parameter | Value |
|---|---|
| Brand Name | JIKONG |
| Model | JK-PB2A16S30P (V19 Version) |
| Usage Scenario | Energy Storage BMS |
| Balance Function | Active Balanced BMS |
| Handware or Smart | SMART BMS |
| Charge and Discharge Port | Common Port BMS |
| Type | LI-ION Battery BMS (compatible with LiFePo4/LTO) |
| Origin | Mainland China |
| Certification | CE, FCC, RoHS |
| High-concerned chemical | none |
| Supply voltage | 20-70 V |
| Standby power consumption | 12 mW |
| Operating power consumption | 1100 mW |
| Operating temperature | -30-70 ℃ |
| Protective plate size | 300*100*24 mm |
| Product weight | 1000 g |
3.2 Electrical Specifications
| Parameter | Value |
|---|---|
| Battery Strings | 8S ~16S |
| Battery Type Compatibility | Li-ion/LiFePo4/LTO |
| Active Balance Current | 1A, 2A (model dependent) |
| Charging Current | 200A (for JK-PB2A16S30P) |
| Charge/Discharge Current | 100A, 150A, 200A, 300A (model dependent) |
| Maximum number of collection strings | 16S |
| Single Cell Voltage Range | 1-5V |
| Voltage Acquisition Accuracy | ±5mV |
| Over Charge Protection Voltage | 1.2-4.35V Adjustable |
| Over Charge Release Voltage | 1.2-4.35V Adjustable |
| Over Current Detect Delay | 2-120S Adjustable |
| Over Discharge Protection Voltage | 1.2-4.35V Adjustable |
| Over Discharge Release Voltage | 1.2-4.35V Adjustable |
| Quantity of Temperature Detection | 4 |
| Temp Protection | Yes |
| Short Circuit Protection | Yes |
| Coulomb Counter | Yes |
| Bluetooth Function | Support for Android/iOS/Harmony |
| Parallel charging current limiting | 10A |
| Address dial switch | 4 |
| DRY Contact | 2 |
| Heating Function | Yes |
| Bluetooth / RS-485/CAN | Yes |
For detailed specifications across different models (JK-PB1A16S10P, JK-PB1A16S15P, JK-PB2A16S15P, JK-PB2A16S20P, JK-PB2A16S30P), please refer to the table below:

Image: JIKONG Product Specifications table detailing various technical indices for different BMS models.

Image: Detailed Product Parameters table including voltage ranges, protection settings, and communication features.
4. Packing List
The following items are included in your JIKONG V19 Inverter Smart BMS package:
- Inverter BMS x1
- Interface Board x1
- Adapter x1
- Instruction Manual x1
- Switch x1 (long 50 cm)
- Ribbon Cable x1 (long 30 cm)
- Interface Cable A x1 (long 30 cm)
- Interface Cable B x1 (long 30 cm)
- Cells total B+Cable x1 (long 50cm)
- RS485 Network Cable x1 (long 48.5 cm)
- Sampling Line B x1 (long 90 cm)
- Sampling Line A x1 (long 90 cm)
- Heating Adapter Cable x1 (long 17 cm)

Image: Visual representation of all components included in the JIKONG V19 BMS package.
5. Setup and Installation
5.1 Product Appearance and Interface Board
The JIKONG V19 BMS features a main board and an interface board. The main board includes the core processing unit, power components, and battery connection points. The interface board provides various communication ports and control switches.

Image: Main product view highlighting key features and specifications of the JIKONG V19 BMS.

Image: Exploded view showing internal components like cooling aluminum alloy, MCU, MOS, and wiring terminals.

Image: Detailed view of the interface board, showing sampling line ports, RS485, RS232, CAN interfaces, dry interface, dial switch, and main switch.
5.2 Wiring Instructions
The JK-PB1/2A16S-10/15/20P series protection board is suitable for 7-16 series lithium battery packs. The specific wiring method varies depending on the number of cells in your battery pack. Always ensure all cables are connected correctly before powering on the BMS.
- Connect all the cables to their respective ports on the BMS and interface board.
- Insert the balance cables into the BMS.
- Connect the B-line (total negative electrode) and the P-line (total positive electrode) to the battery.
- Note that there are two B8 cables. Only the first B8 line needs to be connected. The second B8 cable does not need to be connected.

Image: Wiring diagram for a 16-string cell configuration, showing connections for B-, P-, heater element, temperature control switch, inverter, and charger.

Image: Comparative wiring diagrams for both 16-string and 8-string cell configurations.
5.3 Connector and LED Definitions
Refer to the following table for detailed pin definitions for each connector on the BMS and interface board. Correct connections are crucial for proper operation.
| Connector | Pin No. | Pin Name | Description |
|---|---|---|---|
| URAT Display Interface (P4) | 1 | K- | Activation signal negative electrode |
| 2 | K+ | Activate the positive signal | |
| 3 | GND | Negative terminal | |
| 4 | RX | UART RX, 5V | |
| 5 | TX | UART TX, 5V | |
| 6 | VCC | Display power output | |
| Display Interface (P5) | 1 | VCC | Display power output |
| 2 | A | Display RS485 signal negative | |
| 3 | B | Display RS485 signal positive | |
| 4 | GND | Negative terminal | |
| 5 | K+ | Activate the positive signal | |
| 6 | K- | Activation signal negative electrode | |
| Acquisition Interface (P6) | 1 | NT1 | Connect the NTC1 temperature probe |
| 2 | GND | Connect the NTC1 temperature probe | |
| 3 | B0 | Total negative battery | |
| 4 | B1 | The first battery positive | |
| 5 | B2 | The second battery positive | |
| 6 | B3 | The third battery positive | |
| 7 | B4 | The fourth battery positive | |
| Acquisition Interface (P7) | 1 | NTC2 | Connect the NTC2 temperature probe |
| 2 | GND | Connect the NTC2 temperature probe | |
| Heating Interface (P10) | 1 | HT- | Heater element negative electrode |
| 2 | HT+ | Heater element positive electrode | |
| Power Input (P11) | 1 | B+ | Power input positive |
The Bluetooth connection indicator LED on the BMS will be steady on when connected to the protection board and blink when disconnected.
5.4 Device Activation
Before powering on the protection board, ensure the balance cables are properly connected and the P- and B- lines are correctly connected. Verify that the protection board is securely fixed to the battery pack. Once confirmed, power on the protection board.
The BMS is designed for charging activation mode (charger voltage 2V higher than battery voltage). After battery assembly, connect the charger to activate the protection board. Alternatively, if you have a display screen and button, insert the cable into the display interface and press the button to activate.
6. Operating Instructions
6.1 APP Installation and Usage
The JIKONG BMS can be controlled and monitored via a mobile application. To install the APP, scan the QR code below. An Android device with version 7 or higher is required.

Image: QR code for downloading the JIKONG BMS mobile application.
Once installed, connect to the BMS via Bluetooth to view battery status and adjust parameters. The APP allows real-time monitoring of battery voltage, current, temperature, and capacity. You can also set various protection parameters and control charge/discharge switches.
6.2 Active Equalization
The active equalization feature transfers energy from high-voltage cells to low-voltage cells to maintain battery consistency. Before using, set basic battery parameters in the APP, including cell count, battery capacity, trigger equalization differential pressure (default value can be retained), voltage calibration, and current calibration. The default balance current is 1A/2A. It is recommended that the balance current not exceed 0.2C of the battery capacity. If not needed, disable it in the APP's BMS control page.
6.3 Display Interface
The BMS supports an optional display screen (e.g., 7-inch LCD) for convenient viewing of battery information. This display connects to the dedicated interface on the BMS.

Image: Optional 7-inch LCD display showing real-time battery data such as voltage, current, capacity, and cell status.
6.4 Heating Function
The BMS includes a heating function to warm the battery in low-temperature conditions, preventing reduced battery activity. The designed heating current is 10A. Users can switch this function on/off via the APP. It is recommended to install a normally closed temperature switch (45-65°C) in series with the heating circuit as a secondary protection to prevent thermal runaway.
6.5 Dry Contact Function
Two dry contacts are provided to control external devices like alarms or fans. When the BMS detects an over-temperature, overcharge, or over-discharge state, the alarm interface can switch the dry contact status to trigger a buzzer or activate a fan for cooling. Users can select two trigger conditions in the APP.

Image: Diagram illustrating the wiring for the dry contact function to an external buzzer.
6.6 Protection Functions
The BMS offers comprehensive protection features:
- Charge Overvoltage Protection: Prevents overcharging by shutting off charging when any cell exceeds the set overvoltage limit. Charging resumes when all cells are below the recovery voltage.
- Discharge Undervoltage Protection: Prevents over-discharge by shutting off discharge when any cell falls below the set undervoltage limit. Discharge resumes when all cells are above the recovery voltage. The BMS will automatically shut down if any cell voltage drops below the automatic shutdown voltage.
- Charge Overcurrent Protection: Triggers if charging current exceeds the set limit for a specified delay. Charging is stopped and resumes after the overcurrent release time.
- Discharge Overcurrent Protection: Triggers if discharge current exceeds the set limit for a specified delay. Discharge is stopped and resumes after the overcurrent release time.
- Over Temperature Protection: Shuts down charging/discharging if battery temperature exceeds set limits. Operation resumes when temperature returns to safe levels.
- Low Temperature Protection: Shuts down charging if battery temperature falls below set limits. Charging resumes when temperature rises above the recovery value.
- Short Circuit Protection: Automatically protects against short circuits. Users can adjust the short circuit protection delay and recovery time in the APP.
6.7 Emergency Switch
The emergency switch function allows the BMS to maintain charge/discharge for 30 minutes even if issues like over-temperature, over-discharge, overcharge, or string drops occur. This provides a temporary operational window for critical situations.
6.8 Intelligent Sleep
The intelligent sleep function can be enabled/disabled via the APP. When active, the BMS enters a low-power sleep mode if the charge/discharge current is less than 1A for 26 consecutive hours, reducing self-consumption. It can be reactivated by pressing a button or connecting a charger.
6.9 Communication Function
The BMS supports CAN and RS485 communication. The default CAN communication rate is 250K. Users can select the appropriate protocol in the APP based on their inverter brand. Two RS485 interfaces are available: RS485-1 for inverter communication and RS485-2 for parallel connection and communication with a host computer. The default baud rate for RS485-2 is 115200. Communication addresses (0-15) can be set using DIP switches for parallel operation.

Image: Diagram illustrating various applications for the JIKONG BMS in home energy storage, communication base stations, and industrial equipment.
6.10 Charge Current Limiting Function
The BMS includes a charge current limiting function. Users can set the continuous charging current, delay, and release time in the APP. If the charging current exceeds the set limit, the function activates, limiting the charging current to approximately 10A to protect the battery.
6.11 Parallel Function
The parallel function allows multiple BMS units to be monitored simultaneously by a host computer via an RS485 bus. This requires a USB to RS485 serial port cable and the JIKONG host computer software. Up to 16 BMS units are supported, with address 0 designated as the host and addresses 1-15 as slaves. Addresses are set using DIP switches.

Image: Diagram showing how multiple JIKONG BMS units can be connected in parallel for monitoring by a host computer.
7. Maintenance
To ensure optimal performance and longevity of your JIKONG V19 Smart BMS, follow these general maintenance guidelines:
- Regular Inspection: Periodically check all wiring connections for tightness and signs of wear or corrosion.
- Cleanliness: Keep the BMS unit clean and free from dust and debris. Use a soft, dry cloth for cleaning. Avoid using liquids or abrasive cleaners.
- Environmental Conditions: Ensure the BMS operates within its specified temperature range (-30 to 70 ℃). Avoid exposure to excessive moisture or direct sunlight.
- Firmware Updates: Check the official JIKONG website or APP for any available firmware updates to ensure your BMS has the latest features and bug fixes.
- Parameter Review: Periodically review the BMS parameters in the APP to ensure they are correctly configured for your battery type and application.
8. Troubleshooting
If you encounter issues with your JIKONG V19 Smart BMS, consider the following troubleshooting steps:
- No Power/Activation: Ensure all battery connections (B-line, P-line, balance cables) are secure. If using charging activation, verify the charger is connected and providing sufficient voltage (2V higher than battery). If using button activation, ensure the button is pressed correctly.
- Balancing Issues: Check the active equalization settings in the APP. Ensure the trigger differential pressure is set appropriately and the function is enabled. Verify all balance cables are correctly connected.
- Communication Problems (Bluetooth/RS485/CAN): For Bluetooth, ensure the BMS is powered on and within range. For RS485/CAN, check wiring, baud rates, and communication protocols in the APP. For parallel systems, verify DIP switch addresses are correctly set.
- Protection Triggered: If a protection (overvoltage, overcurrent, over-temperature, etc.) is triggered, check the corresponding battery parameters and environmental conditions. The BMS will typically resume operation once conditions return to normal.
- Short Circuit Protection: If triggered, ensure there are no external short circuits. Increase the short circuit protection delay in the APP if necessary, especially for loads with high instantaneous current draw.
- Abnormal Readings: If voltage, current, or temperature readings appear incorrect, verify sensor connections and calibration settings in the APP.
If the problem persists after attempting these steps, consult the official JIKONG support resources or the user manual PDF for more detailed guidance.
9. User Tips
- Initial Setup: Always double-check all wiring, especially the balance cables and main power lines (B- and P-), before the first power-on to prevent damage.
- APP Monitoring: Regularly use the mobile APP to monitor your battery's health and performance. This helps in early detection of potential issues.
- Parameter Customization: Take advantage of the adjustable parameters in the APP to fine-tune the BMS settings to match your specific battery chemistry and application requirements.
- Heating Function: In cold climates, utilize the heating function to maintain optimal battery performance and extend its lifespan. Consider adding an external temperature switch for enhanced safety.
10. Frequently Asked Questions (FAQ)
- Q: Does this BMS have Wi-Fi connectivity for remote monitoring when I'm away from home?
- A: The JIKONG V19 Smart BMS supports Bluetooth communication for local monitoring via its mobile APP. It also features RS485 and CAN communication for integration with inverters and host computers. However, it does not include built-in Wi-Fi for remote monitoring over the internet. For remote access, you would typically integrate it into a system that provides internet connectivity for its RS485/CAN interface.
- Q: What battery types are compatible with this BMS?
- A: The JIKONG V19 Smart BMS is compatible with LiFePo4, ternary lithium (Li-Ion), and lithium titanate (LTO) battery types.
- Q: How many battery cells can this BMS manage?
- A: This BMS is designed for battery packs with 8S to 16S (8 to 16 series) cells.
11. Documents and Support
For more detailed information, including comprehensive diagrams and advanced settings, please refer to the official user manual PDF:
For technical support or further inquiries, please contact JIKONG customer service.