Introduction
The FEELWORLD F7 PLUS is a high-brightness 7-inch field monitor designed for DSLR and mirrorless cameras, offering a 1920x1200 Full HD display with 1200nit brightness for clear visibility in various lighting conditions, including daylight. It supports 4K HDMI input/output and features advanced monitoring tools such as HDR, 3D LUTs, waveform, vector scope, and histogram. With intuitive touch screen controls and multiple power options, the F7 PLUS enhances your filming experience by providing precise visual feedback and extended camera run-time.

Package Contents
Please check the box for the following items:
- 1 × FEELWORLD F7 PLUS Monitor
- 1 × A-A HDMI Cable
- 1 × Micro HDMI Cable
- 1 × Mini Hot Shoe Mount + Hex Wrench
- 1 × Disassemble Wrench
- 1 × User Manual

Product Overview
Familiarize yourself with the physical components and interfaces of your F7 PLUS monitor.

- Front: 7-inch Full HD Touch Screen
- Top: MENU Scroll Key, 1/4 Screw Thread, Indicator Light, Switch
- Left Side: Headphone Jack, Type-C Input, 1/4 Screw Thread, SD Card Slot
- Right Side: HDMI Input, HDMI Output, DC Power Input, DC Power Output
- Rear: Battery Lock, NP-F Battery Plate, F970 External Kit
Setup
Mounting the Monitor
The F7 PLUS is equipped with three standard 1/4”-20 mounting threads located on the top, bottom, and right side. This allows for flexible mounting options on your camera, camera cage, or other equipment using a magic arm or bracket. Use the included Mini Hot Shoe Mount for direct attachment to a camera's hot shoe.

Powering the Monitor
The F7 PLUS offers multiple power supply options:
- DC Power Input: Connect a DC 7-24V power adapter (1.5A or 2A, DC 5.5*2.1mm power plug) for continuous power.
- NP-F Battery Plate: Install a standard NP-F series battery (e.g., F550, F750, F970) for mobile applications. A fully charged F750 battery (4400mAh) provides approximately 2 hours of operation.
- Type-C Input: Use a 5V Type-C power source, such as a mobile phone charger or power bank (minimum 5V/2A).
Note: Batteries and DC power adapters are not included and must be purchased separately.

Connecting to a Camera
Connect your camera's HDMI output to the F7 PLUS HDMI Input using the appropriate HDMI cable (A-A HDMI or Micro HDMI, depending on your camera model). The monitor supports HDMI 2.0 and various video formats up to 4K UHD 3840×2160p (30/29.97/25/24/23.98).
Refer to the following diagrams for common camera HDMI cable types:


Powering External Devices
The F7 PLUS features a DC 8V output (DC 5.5*2.1mm power plug) that allows you to power your DSLR or mirrorless camera, or other external equipment like wireless transmitters or LED lights, directly from the monitor's battery. This helps to simplify your camera rig and reduce overall weight.
Operating the Monitor
Basic Controls and Navigation
The F7 PLUS offers two primary methods for control:
- Touch Screen: Use simple tap and swipe gestures on the LCD to navigate menus and adjust settings.
- Physical Buttons: Utilize the MENU scroll key and other physical buttons for precise control, especially useful when touch input is not convenient.


Advanced Monitoring Functions
The F7 PLUS includes a comprehensive suite of professional monitoring tools:
- HDR Monitoring: Activate HDR to display a greater dynamic range, revealing more detail in highlights and shadows. Built-in HLG1, HLG2, HLG3 modes are available.
- 3D LUTs: Load up to 32 custom 3D LUT (.cube) files via the SD card slot to preview different color styles in real-time. The monitor also has 4 built-in DE-log LUTs.
- Waveform Monitoring: Access waveform (RGB Parade, YUV Parade, Y Parade), vector scope, histogram, and audio phase/level displays for technical analysis of your video and audio signals. These can be opened separately or all at once.
- Auxiliary Features: Utilize tools such as Focus Assist, False Color, Peaking Filter, Ratio Marker, Overscan, Aspect Ratio, Anamorphic Mode, Embedded Audio, Check Field, Nine Grid, Screen Marker, Pixel-to-Pixel, Image Flip, Image Freeze, Center Marker, and Zoom-in.





User Switching
The F7 PLUS supports 4-group user switching, allowing you to quickly switch between different sets of customized settings. This is ideal for multi-user environments or for quickly changing between different shooting scenarios.

Language Support
The F7 PLUS features built-in support for up to 11 languages, making it suitable for international production teams. You can easily change the language through the monitor's menu.

Product Demonstration Video
Maintenance
Cleaning
- Always power off the monitor before cleaning.
- Use a soft, lint-free cloth to gently wipe the screen and body.
- For stubborn smudges on the screen, use a screen-specific cleaning solution applied to the cloth, not directly to the screen.
- Avoid using harsh chemicals, solvents, or abrasive materials, as these can damage the monitor's finish or screen coating.
Storage
- When not in use, store the monitor in a dry, cool place away from direct sunlight and extreme temperatures.
- Use a protective case or pouch to prevent scratches and impacts during transport or storage.
- If storing for an extended period, remove any attached batteries.
Troubleshooting
- Monitor does not power on: Ensure the power source (DC adapter, NP-F battery, or Type-C) is correctly connected and providing sufficient power. Check battery charge level.
- No video signal: Verify that the HDMI cable is securely connected to both the camera and the monitor. Confirm the camera's HDMI output settings match the monitor's input capabilities. Try a different HDMI cable.
- Display issues (e.g., flickering, incorrect colors): Check the HDMI cable for damage. Ensure the monitor's resolution and frame rate settings are compatible with the camera's output. Reset monitor settings to default if necessary.
- Touch screen unresponsive: Ensure the screen is clean and free of debris. Restart the monitor. If the issue persists, try using the physical buttons for navigation.
Specifications
| Feature | Specification |
|---|---|
| Brand Name | FEELWORLD |
| Model Number | F7 PLUS |
| Display Size | 7" |
| Resolution | 1920x1200 pixels |
| Brightness | 1200cd/m2 |
| Contrast | 1200:1 |
| Aspect Ratio | 16:10 |
| Viewing Angle | 80/80(L/R) 80/80 |
| Backlight | LED |
| Input | HDMI |
| Output | HDMI, DC |
| HDMI Input/Output Support Format | HDMI 2.0 |
| HDMI Support Format (Detailed) | 720*480i & 720*480p(59.94, 60Hz), 720*576i & 720*576p(50Hz), 1280*720p(50, 59.94, 60Hz), 4096*2160P(24Hz), 1080p (60/59.94/50/30/29.97/25/24/24sF/23.98/ 23.98sF), 4K UHD 3840×2160p (30/29.97/25/24/23.98), 1080i (60/59.94/50) |
| Power Source | DC |
| Input Voltage | DC7-24V |
| Power Consumption | ≤15W |
| Working Temperature | -20°C-50°C |
| Storage Temperature | -30°C-60°C |
| Install Way | 1/4-20 Thread Socket |
| Unit Size | 186x117x21 mm |
| Unit Weight | 389g |
| Supporting Language | Japanese, French, German, Italian, Spanish, Russian, English, Korean, Simplified Chinese, Traditional Chinese Style, Dutch |
| Certification | CE, FCC, RoHS |
| Inbox adaptor | No |
| High-concerned chemical | None |
| Plug Type | EU Plug, US Plug, AU Plug, UK Plug, JP |
| Origin | Mainland China |
User Tips
- Monitor vs. Camera: Please note that the FEELWORLD F7 PLUS is a field monitor designed to display video signals from a camera; it is not a camera itself.
- Battery Not Included: The monitor does not come with a battery. You will need to purchase a compatible NP-F series battery or a DC power adapter separately to power the device.
- SD Card for LUTs: When loading custom 3D LUTs, ensure your SD card is formatted to FAT32 or NTFS (MS-DOS(FAT) for Mac). LUT files should be .cube format (case insensitive) and a single file must not exceed 7.9MB. LUT filenames should be in English or numbers.
Warranty and Support
For warranty information, technical support, or service inquiries, please contact the FEELWORLD Official Store or refer to the warranty card included with your product. Keep your purchase receipt as proof of purchase.