Introduction
The Hti HT-A10 is a high-resolution handheld infrared thermal imager designed for various applications including PCB circuit repair, floor heating detection, and general thermal analysis. Featuring a 256x192 IR resolution and a wide temperature range, this device provides accurate and detailed thermal imaging. It supports WiFi connectivity for real-time imaging on mobile devices and offers multiple color palettes for diverse visualization needs.
Package Contents
Please check the package carefully to ensure all items are present:
- Hti HT-A10 Thermal Imager
- Protective Carrying Case
- USB Charging Cable
- Instruction Manual
- Power Adapter (if included)

Device Overview
Familiarize yourself with the components and controls of your HT-A10 thermal imager:

- Infrared Lens: Captures thermal radiation.
- Digital Camera Lens: Captures visual images for image fusion.
- Micro USB Port: For charging and data transfer.
- Power ON/OFF Key: To turn the device on or off.
- Menu Key: Accesses the device's settings and options.
- Trigger: Used to capture images or activate specific functions.
- Navigation Keys (Up, Down, Left, Right): For navigating through menus and adjusting settings.
- Selection/Enter Key: Confirms selections in the menu.
- Lens Protective Cap: Protects the lenses when not in use.
Setup
1. Initial Charging
Before first use, fully charge the thermal imager using the provided USB cable and power adapter. Connect the Micro USB cable to the device and the adapter to a power outlet. The charging indicator will show the charging status.
2. Powering On/Off
Press and hold the Power ON/OFF Key until the screen illuminates to turn on the device. To power off, press and hold the Power ON/OFF Key again until the device shuts down.
3. Language and Basic Settings
Upon first startup, you may need to select your preferred language and set the date/time. Navigate through the menu using the Navigation Keys and confirm with the Selection/Enter Key.
Operating Instructions
1. Capturing Thermal Images
Point the thermal imager at the target area. Press the Trigger button to capture a thermal image. The image will be saved to the device's internal memory or an inserted SD card (if applicable).
2. Menu Navigation
Press the Menu Key to access the main menu. Use the Up/Down Navigation Keys to scroll through options and the Left/Right Navigation Keys to adjust values or sub-menus. Press the Selection/Enter Key to confirm your choice.
3. Color Palettes
The HT-A10 offers five distinct color palettes to visualize thermal data. These can be selected from the menu to suit different inspection scenarios:
- Rainbow: Provides a full spectrum of colors for detailed temperature differentiation.
- Iron Red: Highlights hot spots with red and yellow tones.
- Cold Color: Emphasizes cooler areas with blue and purple tones.
- White Heat: Displays hotter areas as white and cooler areas as black.
- Black Heat: Displays hotter areas as black and cooler areas as white.

4. WiFi Connectivity and Real-time Imaging
The HT-A10 supports WiFi connectivity for real-time thermal imaging on compatible mobile devices (Android, Apple, Tablet PC) and personal computers. To connect:
- Enable WiFi on your HT-A10 from the settings menu.
- Connect your mobile device or PC to the WiFi network broadcast by the HT-A10.
- Use the dedicated application (refer to the manual for app details) to view real-time thermal images and synchronize settings.

Maintenance
1. Cleaning the Device
Gently wipe the device body with a soft, dry cloth. For the lenses, use a specialized lens cleaning cloth and solution to avoid scratches. Do not use abrasive cleaners or solvents.
2. Storage
When not in use, store the thermal imager in its protective carrying case in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the lens protective cap is in place.
3. Battery Care
To prolong battery life, avoid fully discharging the battery frequently. If storing for extended periods, charge the battery to approximately 50% and recharge every few months.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on. | Low battery or device malfunction. | Charge the device for at least 30 minutes. If it still doesn't power on, contact support. |
| Thermal image is blurry or unclear. | Dirty lens or incorrect focus (though focusing mode is fixed, ensure proper distance). | Clean the infrared lens with a soft, lint-free cloth. Ensure the target is within the optimal measurement range. |
| WiFi connection issues. | Incorrect WiFi settings or interference. | Ensure WiFi is enabled on the device and your mobile device/PC. Try restarting both devices. Check for app updates. |
| Inaccurate temperature readings. | Incorrect emissivity setting or environmental factors. | Adjust the emissivity setting in the menu to match the material being measured. Avoid measuring through reflective surfaces. |
Specifications
| Feature | Detail |
|---|---|
| Brand Name | Hti |
| Model Number | HT-A10 |
| IR Resolution | 256x192 |
| Thermal Pixels | 256*192 |
| NETD | ≤50mK@25℃, F/1.0 |
| IFOV | 3.75mrad |
| Field Angle | 26°x42° |
| Accuracy | ±2℃/±2% |
| Minimum Temperature | -20 ℃ |
| Maximum Temperature | 300 ℃ |
| Focusing Mode | Fixed |
| Response Waveband | 8~14μm |
| Pixel Spacing | 12μm |
| Power Type | Button Battery |
| Battery Included | No |
| Is Smart Device | Yes |
| WIFI Support | Yes |
| Software Analysis & Video | Support |
| Certification | CE, RoHS |
| Origin | Mainland China |
User Tips
- For best results, ensure the target surface is clean and dry.
- When detecting floor heating, move the imager slowly and steadily across the floor to identify temperature variations.
- Adjust the emissivity setting for different materials (e.g., painted surfaces, bare metal, wood) to get more accurate temperature readings.
- Utilize the different color palettes to enhance visibility of specific temperature ranges or anomalies.
- Regularly check for firmware updates to ensure optimal performance and access new features.
Warranty and Support
Hti products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the contact details provided in your product packaging or visit the official Hti website. Keep your purchase receipt as proof of purchase for warranty claims.
Note: All delivered products are tested before shipping to ensure functionality. In case of missing or defective parts, please notify the seller within 5 days of receiving the item for re-shipment. After-sale service is typically provided within 1 year of purchase.