1. Introduction
The TSUN MA06L is a high-precision magnetic grid displacement digital display table designed for accurate linear measurement. It is ideal for integration with cutting machines, woodworking equipment, and other industrial applications where precise positioning and measurement are critical. This manual provides detailed instructions for the safe and efficient use of your MA06L unit.
2. Safety Information
Please read and understand all safety instructions before operating the device. Failure to follow these instructions may result in injury or damage to the product.
- Keep the device away from strong magnetic fields, which can interfere with its operation.
- Avoid exposing the unit to excessive moisture, dust, or extreme temperatures.
- Do not attempt to disassemble or repair the unit yourself. Refer to qualified service personnel.
- Ensure proper power supply if external power is required (not explicitly stated, but good general advice).
- Handle the magnetic sensor and display unit with care to prevent physical damage.
3. Package Contents
Verify that all items are present in your package:
- TSUN MA06L Digital Display Unit
- Magnetic Sensor / Read Head
- Connecting Cable (integrated with sensor)
- User Manual (this document)
4. Specifications
| Feature | Description |
|---|---|
| Model Number | MA06L |
| Fixed Type | Magnetic Fastener |
| Display Type | Digital LCD |
| Sensor Type | Built-in sensor (for magnetic grid ruler) |
| Dimensions (Display Unit) | Approximately 67.6mm x 73.7mm x 36.2mm |
| Origin | Mainland China |
5. Setup and Installation
Follow these steps to set up your MA06L digital display table:
- Mounting the Magnetic Grid Ruler (Sold Separately): Securely attach the compatible magnetic grid ruler to your machine's axis where displacement measurement is required. Ensure it is straight and firmly fixed.
- Mounting the Display Unit: The MA06L display unit features a magnetic fastener for easy attachment to ferrous surfaces. Choose a convenient and visible location on your machine.
- Mounting the Magnetic Sensor: Position the magnetic sensor (read head) so that it moves along the magnetic grid ruler without touching it, maintaining a small, consistent air gap. Ensure the sensor is securely fastened to the moving part of your machine.
- Connecting the Sensor: The sensor is typically connected to the display unit via an integrated cable. Ensure the connection is secure.
- Power On: The unit is usually battery-powered or may require an external power source (check specific model requirements). Power on the unit.
6. Operation
The MA06L digital display provides intuitive controls for precise measurement.
6.1 Basic Functions
- Power On/Off: Press the power button (if available, otherwise it might be always on or auto-off).
- Zeroing: To set the current position as zero, press the 'ABS/REL' button briefly. This will reset the display to 0.00 at the current sensor position.
- Absolute (ABS) / Relative (REL) Measurement:
- Absolute Mode: Displays the measurement from a fixed reference point (e.g., the start of the magnetic grid).
- Relative Mode: Displays the measurement from the last zeroed point. Press 'ABS/REL' to toggle between these modes.
- Unit Conversion (mm/inch): Press the 'mm/inch' button to switch between millimeters and inches.
- Direction Change: Use the arrow buttons (up/down or left/right, depending on model) to reverse the counting direction if needed.
6.2 Measurement Demonstration
The following video demonstrates the MA06L in operation, showing how the display changes as the magnetic sensor moves along a linear scale.
7. Maintenance
To ensure the longevity and accuracy of your MA06L unit, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to clean the display unit and sensor. Do not use abrasive cleaners or solvents.
- Sensor Alignment: Periodically check the alignment and gap between the magnetic sensor and the grid ruler. Ensure no debris is obstructing the sensor's path.
- Battery Replacement: If the display dims or shows a low battery indicator, replace the batteries (if applicable) according to the markings on the unit.
- Storage: When not in use, store the unit in a clean, dry environment, away from direct sunlight and extreme temperatures.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Display not turning on | No power or dead batteries. | Check power connection or replace batteries. |
| Inaccurate readings | Sensor misalignment, debris on magnetic grid, or strong magnetic interference. | Realign sensor, clean magnetic grid, or relocate unit away from interference. |
| Display shows "E07" or similar error | Sensor not detected or connection issue. | Ensure sensor cable is securely connected and sensor is properly positioned over the magnetic grid. |
9. User Tips
- For consistent accuracy, always ensure the magnetic grid ruler and sensor are free from dust, chips, or other contaminants.
- When mounting, use a level and square to ensure the magnetic grid is perfectly parallel to the desired axis of measurement.
- Regularly check the battery level to avoid interruptions during critical measurements.
- Familiarize yourself with both ABS and REL modes to efficiently switch between absolute positioning and incremental measurements.
10. Frequently Asked Questions (FAQ)
- Q: Can this unit be used outdoors?
- A: The MA06L is designed for indoor use. Exposure to harsh outdoor elements like rain or extreme temperatures may damage the unit.
- Q: What type of magnetic grid ruler is compatible?
- A: The unit is designed to work with standard magnetic grid rulers that are compatible with its built-in sensor. Consult the product specifications or supplier for recommended magnetic scales.
- Q: How do I change the measurement direction?
- A: Use the directional arrow buttons on the display unit to reverse the counting direction if the readings are increasing when they should be decreasing, or vice-versa.
11. Warranty and Support
For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.
Manufacturer: TSUN
Model: MA06L