1. Introduction
The Beitian M10 Compact Precision GNSS Module is a versatile and high-performance Global Navigation Satellite System receiver. It supports multiple constellations including GPS, BDS, and GALILEO, offering precise positioning capabilities. Designed for miniaturization and low power consumption, this module is ideal for integration into various applications such as smart devices, wearable technology, car navigation systems, and handheld devices.


2. Specifications
The following tables detail the technical specifications and features of the Beitian M10 GNSS Module (BE-126 and BE-190 series).
2.1. General Features
| Item | Description |
|---|---|
| Chip | M10050 |
| Receiver type | GPS L1 C/A, QZSS L1 C/A/S, BDS B1I/B1C, Galileo E1B/C, SBAS L1 C/A: WAAS, EGNOS, MSAS, GAGAN |
| Default position system | GPS, BDS, GALILEO |
| Augmentation system | SBAS, QZSS |
| Channel | N/A |
| Wireless Function | Yes |
| PCB included | Yes |
2.2. Performance Characteristics
| Category | Item | Value |
|---|---|---|
| Sensitivity | Tracking & Navigation | -166dBm |
| Reacquisition | -160dBm | |
| Cold start | -148dBm | |
| Hot Start | -160dBm | |
| Accuracy | Horizontal position | 2.0m CEP |
| Velocity | 0.05m/s | |
| Dynamic heading | 0.3 deg | |
| Time pulse | RMS 30ns | 99% 60ns |
| Frequency of time pulse signal | Configurable from 0.25 Hz to 10 MHz, default 1s, high level 100ms | |
| Acquisition | Cold start | 27s |
| Hot start | 1s | |
| Aided start | 1s | |
| Operational Limits | Altitude | 80,000m |
| Velocity | 500m/s | |
| Dynamics | <4g |
2.3. Electrical and Physical Specifications
| Category | Item | Value |
|---|---|---|
| Power Consumption | Voltage | DC 2.7V-3.6V, typical: 3.3V |
| Current | 30mA/3.3V | |
| Physical Specifications | Dimension | 16*12.2*2.4mm |
| Weight | 1.0g | |
| Connector | 24pin SMD package | |
| Temperature | Operating | -40 °C ~ +85°C |
| Storage | -40 °C ~ +105°C |


3. Setup & Installation
Proper setup and installation are crucial for the optimal performance of the GNSS module. This section provides details on pin definitions, PCB layout, and recommended circuit diagrams.
3.1. Pin Definition
The module features a 24-pin SMD package. The following table and diagram illustrate the function and characteristics of each pin.
| PIN | Name | I/O | Description | Characteristic |
|---|---|---|---|---|
| 1 | Reserved | I/O | dangling | dangling |
| 2 | D_SEL | I/O | dangling | Interface selection, floating |
| 3 | 1PPS | O | Module working status, second pulse output, one output per second | VOH≥2.1375V, VOL≤0.7125V |
| 4 | EXTINT | I/O | dangling | dangling |
| 5 | N.C. | I/O | dangling | dangling |
| 6 | N.C. | I/O | dangling | dangling |
| 7 | N.C. | I/O | dangling | dangling |
| 8 | RESET-N | I/O | Reset pin, reset low | Reset pin, reset low |
| 9 | VCC_RF | G | Antenna power supply terminal, voltage 3.3V | as the power supply for the antenna |
| 10 | GND | G | ground | ground |
| 11 | RF_IN | I | GPS signal input, connect to GPS antenna | 50ohm@1575.42MHz |
| 12 | GND | G | ground | GND |
| 13 | GND | G | ground | GND |
| 14 | N.C. | I/O | dangling | dangling |
| 15 | N.C. | I/O | dangling | dangling |
| 16 | N.C. | I/O | dangling | dangling |
| 17 | N.C. | I/O | dangling | dangling |
| 18 | SDA | I/O | I2C SDA | I2C data, if not used, keep floating |
| 19 | SCL | I/O | I2C SCL | I2C clock, if not used, keep floating |
| 20 | TX | O | UART TX | TX serial data output |
| 21 | RX | I | UART RX | RX serial data input |
| 22 | V_BCKP | I | RTC power pin. 25µA | 1.4V~3.6V, 3.3V DC recommended |
| 23 | VCC | I | VCC power supply pin, voltage 2.7~3.6V | Standard input 3.3V DC |
| 24 | GND | G | ground | ground |

3.2. PCB Layout
The recommended PCB layout for integrating the GNSS module is shown below. Adhering to these dimensions and pad configurations is essential for proper electrical and mechanical connection.

3.3. Module Recommended Circuit
For typical applications, the following circuit diagram is recommended for integrating the GNSS module into your system. This includes power supply, data communication, and antenna connections.

3.4. SMT Temperature Curve
When assembling the module using Surface Mount Technology (SMT), adhere to the specified temperature profile to prevent damage and ensure reliable connections.

4. Operation
The Beitian M10 GNSS module communicates via standard protocols and offers various configuration options.
4.1. Data Output Protocol
The module supports NMEA and UBX protocols for data output. The default baud rate is 115200bps, configurable from 4800bps to 921600bps. The update rate can be set from 0.25Hz to 18Hz, with a default of 1Hz.
Common NMEA messages include:
- $GNRMC: Recommended Minimum Specific GNSS Data
- $GNVTG: Track Made Good and Ground Speed
- $GNGGA: Global Positioning System Fix Data
- $GNGSA: GNSS DOP and Active Satellites
- $GPGSV, $GAGSV, $GBGSV, $GQGSV: GNSS Satellites in View
- $GNGLL: Geographic Position - Latitude/Longitude
The module's configuration can be changed and saved using FLASH memory, ensuring settings are retained even after power loss.
4.2. Positioning Modes and Flags
The module provides various positioning modes and status flags within its NMEA output to indicate the quality and type of fix. These include:
- No position fix: Indicated by 'V' (Data invalid) status.
- Autonomous GNSS fix: Standard fix, indicated by 'A' (Data valid) status and quality '1'.
- Differential GNSS fix: Enhanced accuracy using differential corrections, quality '2'.
- RTK fixed/float: Real-Time Kinematic modes for high precision, quality '4' (fixed) or '5' (float).
- Estimated/Dead reckoning fix: Position estimated when satellite signals are poor or lost, quality '6'.
Detailed flag definitions and message formats are available in the full datasheet (PDF reference below).
5. Maintenance
To ensure the longevity and reliable performance of your Beitian M10 GNSS module, follow these general maintenance guidelines:
- Environmental Conditions: Operate and store the module within the specified temperature ranges (-40°C to +85°C for operation, -40°C to +105°C for storage).
- Cleanliness: Keep the module free from dust, dirt, and moisture. Avoid exposing it to corrosive substances.
- Physical Handling: Handle the module with care to prevent physical damage to the SMD package and pins. Avoid excessive mechanical stress.
- Power Supply: Ensure a stable power supply within the recommended voltage range (DC 2.7V-3.6V) to prevent damage.
6. Troubleshooting
If you encounter issues with your GNSS module, consider the following troubleshooting steps:
- No Position Fix:
- Verify antenna connection to RF_IN (Pin 11) and ensure it is a 50-ohm impedance.
- Check for clear line-of-sight to the sky; obstructions can block satellite signals.
- Ensure the module is powered correctly (VCC, Pin 23) and GND (Pins 10, 12, 13, 24) connections are secure.
- Check the VCC_RF (Pin 9) for proper antenna power supply (3.3V).
- No Data Output:
- Confirm UART TX (Pin 20) and RX (Pin 21) connections are correct.
- Verify the baud rate setting on your host system matches the module's default (115200bps) or configured rate.
- Check if the module is receiving power and is operational (e.g., by monitoring the 1PPS output on Pin 3).
- Inaccurate Positioning:
- Ensure the antenna is placed in an optimal location, away from interference sources.
- Check the NMEA output for HDOP (Horizontal Dilution of Precision) values; lower values indicate better accuracy.
- Consider using augmentation systems (SBAS, QZSS) if available in your region for improved accuracy.
- Module Not Responding:
- Check the RESET-N pin (Pin 8); ensure it is not held low, which would keep the module in reset.
- Verify power supply stability and voltage levels.
7. User Tips
No specific user tips are available at this time due to the absence of customer review data.
8. Warranty & Support
For technical assistance, product warranty details, or any service-related inquiries regarding your Beitian M10 Compact Precision GNSS Module, please contact the BEITIAN Official Store directly. Refer to your purchase documentation for specific contact information.
A detailed user manual in PDF format is available for download, providing comprehensive technical information and advanced configuration options: