METALFISH DH670

Contents

METALFISH DH670 Low Profile CPU Cooler

User Instruction Manual

1. Introduction

The METALFISH DH670 is a high-performance, low-profile CPU cooler designed for compact systems, including ITX builds. Featuring 6 heatpipes and a 120mm PWM fan, it offers efficient cooling with a D-TDP of 180W. This manual provides detailed instructions for installation, operation, and maintenance to ensure optimal performance and longevity of your CPU cooler.

METALFISH DH670 V6 CPU Cooler with RGB fan, 67mm height, 6 pipes, 180W D-TDP
Figure 1: METALFISH DH670 V6 CPU Cooler (RGB version)
METALFISH DH670 V6 CPU Cooler with RGB fan, 6 pipes, 67mm, 180W D-TDP, includes thermal grease
Figure 2: DH670 V6 CPU Cooler with included thermal grease

2. Package Contents

Please verify that all the following components are included in your package:

  • DH670 CPU Cooler (main unit with fan)
  • Thermal Grease (12.8W)
  • Intel Mounting Bracket
  • AMD Mounting Bracket
  • Intel Backplate
  • Screws for Intel (LGA1851/1700/1200/115X/1356/1366, LGA2011)
  • Screws for AMD (AM5/AM4/AM3/AM3+/AM2/AM2+/FM1/2)
  • Spacers (Blue for Intel, Pink for AMD)
  • Fastening Nuts
DH670 V6 Black Lightness specifications table and accessories
Figure 3: Included accessories for DH670 V6

3. Specifications

Feature Specification
Model NumberDH670
Cooler TypeLow Profile
Cooler Size (L*W*H)125*120*67mm
Heatpipes6 heat pipes, Ø6mm (Direct Touch)
D-TDP180W
Fan Size120*120*15mm
Fan Speed800-1800RPM (±10%)
Bearing TypeFluid Bearing (Hydraulic)
Fan Airflow23.46-61.51CFM (MAX)
Fan Pressure0.29-1.71mmH₂O (MAX)
Fan Noise18.3-37.2dBA (Max 25dBA from product properties)
Fan Life≥ 50000 hours
Power Interface4PIN PWM (Fan), 5V 3Pin (ARGB, if applicable)
Blade Quantity9
CertificationCE
Size diagram of the DH670 cooler showing dimensions 125x120x67mm
Figure 4: DH670 Cooler Dimensions
Detailed specifications table for DH670 V6
Figure 5: Detailed Specifications

4. Compatibility

The DH670 CPU Cooler supports a wide range of Intel and AMD platforms:

  • Intel: LGA 1150, LGA 1151, LGA 1155, LGA 1156, LGA 1170, LGA1200, LGA 1366, LGA 1700, LGA 1851, LGA 2011, LGA 2066 (Supports Core i3/i5/i7, E3. Does NOT support LGA775.)
  • AMD: Socket AM3, Socket AM5, AM4, AM3+, AM2, AM2+, FM1, FM2 (Supports Ryzen 3/5, Athlon/Phenom.)
  • XEON: E5/X79/X99, LGA2011/LGA2066 (Does NOT support 2011-3.)
Compatibility image showing supported Intel, AMD, and XEON platforms, with a note about LGA2011-3
Figure 6: Supported CPU Platforms

The cooler is designed for ITX, MATX, and ATX motherboard compatibility. Its low profile ensures compatibility with LED memory, integrated I/O shields, and motherboard heatsink covers. Cooler fins above the integrated I/O shield and memory allow for no limit on DRAM height (Installation Method 2) or support memory up to 43mm height (Installation Method 1).

Installation Method 2 diagram showing cooler fins above I/O shield and no limit for DRAM height
Figure 7: Installation Method 2 - No DRAM height limit
Installation Method 1 diagram showing cooler fins above memory, supporting memory maximum height 43mm
Figure 8: Installation Method 1 - Max 43mm memory height

5. Installation Guide

Before starting, ensure your system is powered off and unplugged. Always handle components with care to prevent damage from static electricity.

A detailed user manual in PDF format is available for download: User Manual (PDF)

5.1. Intel Platform Installation

  1. Prepare Motherboard: Install the Intel backplate onto the motherboard and secure it with the appropriate spacers.
  2. Attach Brackets: Install the Intel mounting brackets and secure them with the fastening nuts.
  3. Apply Thermal Paste: Apply the thermal paste evenly to the CPU surface. Ensure to remove any protective film from the cooler's copper base before mounting.
  4. Mount Cooler: Carefully place the cooler onto the CPU, aligning the screws with the backplate mounting points. Secure it with a screwdriver, tightening screws in a diagonal pattern for even pressure.
  5. Connect Fan Cables: Connect the 4-pin PWM fan cable to the CPU_FAN socket on your motherboard. If your cooler has ARGB lighting, connect the 5V 3-pin ARGB cable to the corresponding header on your motherboard.
Intel platform installation steps 1-5 with diagrams
Figure 9: Intel Platform Installation Steps

5.2. AMD Platform Installation

  1. Remove Retention Module: Remove the plastic retainer of the AMD retention module from your motherboard.
  2. Install Spacers: Install the AMD spacer columns.
  3. Attach Brackets: Install the AMD mounting brackets and secure them with the fastening nuts.
  4. Apply Thermal Paste: Apply the thermal paste evenly to the CPU surface. Ensure to remove any protective film from the cooler's copper base before mounting.
  5. Mount Cooler: Carefully place the cooler onto the CPU, aligning the screws with the backplate mounting points. Secure it with a screwdriver, tightening screws in a diagonal pattern for even pressure.
  6. Connect Fan Cables: Connect the 4-pin PWM fan cable to the CPU_FAN socket on your motherboard. If your cooler has ARGB lighting, connect the 5V 3-pin ARGB cable to the corresponding header on your motherboard.
AMD platform installation steps 1-6 with diagrams
Figure 10: AMD Platform Installation Steps

6. Operation

The DH670 CPU cooler features a 4-pin PWM fan, allowing your motherboard to dynamically control the fan speed based on CPU temperature. This ensures optimal cooling performance while minimizing noise during lighter loads.

  • Fan Control: Access your motherboard's BIOS/UEFI settings or use compatible software to configure fan curves. Adjusting the fan curve can help balance cooling performance and noise levels according to your preference.
  • ARGB Lighting (if applicable): If your model includes ARGB lighting, connect the 5V 3-pin ARGB cable to a compatible motherboard header. You can then control the lighting effects using your motherboard's RGB software.
Diagram illustrating air flow through fins and heat pipes for heat dissipation
Figure 11: Airflow for Efficient Heat Dissipation

7. Maintenance

  • Dust Cleaning: Periodically clean the fan blades and heatsink fins to prevent dust buildup, which can impede airflow and reduce cooling efficiency. Use compressed air or a soft brush. Ensure the system is powered off before cleaning.
  • Thermal Paste: The thermal paste should be reapplied every 2-3 years, or if the cooler is removed and reinstalled. Use high-quality thermal paste for best results.

8. Troubleshooting

  • High CPU Temperatures:
    • Check if the cooler is properly seated on the CPU.
    • Ensure sufficient thermal paste was applied and spread evenly.
    • Verify that the fan is spinning correctly and its cable is securely connected to the CPU_FAN header.
    • Clean any dust buildup on the heatsink fins and fan blades.
    • Check BIOS/UEFI settings for proper fan curve configuration.
  • Fan Not Spinning:
    • Ensure the 4-pin PWM fan cable is securely connected to the CPU_FAN header on the motherboard.
    • Check BIOS/UEFI settings to ensure fan control is enabled and not set to 0 RPM at low temperatures.
  • Excessive Noise:
    • Check for any cables or obstructions hitting the fan blades.
    • Ensure the fan is securely mounted and not vibrating.
    • Adjust the fan curve in BIOS/UEFI to reduce fan speed at lower temperatures.
  • ARGB Lighting Not Working (if applicable):
    • Ensure the 5V 3-pin ARGB cable is correctly connected to a compatible motherboard header.
    • Check your motherboard's RGB software for lighting control.

9. User Tips

  • For LGA 2011v3 with E5 2690v4 processors, some users have found it necessary to modify the Intel kit pins (drilling to fit 4mm screws) for proper mounting.
  • The cooler has been noted to fit well in minimal 5-liter ITX cases, offering good compatibility for small form factor builds.
  • With proper fan curve adjustments, the cooler can maintain good temperatures (e.g., 50-60°C under load) while operating quietly.
  • The DH670 is particularly effective for LGA 1151 systems, providing excellent cooling performance.
  • When installing in a tight ITX case, verify clearance. For example, it has been observed to fit perfectly in a 100mm wide case with about 1.5mm clearance, with the board + cooler measuring around 75mm.

10. Warranty and Support

For warranty claims, technical support, or further assistance, please contact the METALFISH customer service or the retailer from whom you purchased the product. Keep your proof of purchase for warranty validation.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.