1. Introduction
Thank you for choosing the Hi-Spec Pink 3.6V Electric Screwdriver. This compact and powerful cordless screwdriver is designed for various home DIY tasks, making screw fastening and loosening quick and effortless. Please read this manual thoroughly before use to ensure safe and optimal performance of your tool.

2. General Safety Instructions
Always follow basic safety precautions when using electric tools to reduce the risk of fire, electric shock, and personal injury.
- Keep the work area clean and well-lit.
- Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
- Keep children and bystanders away while operating a power tool.
- Dress properly. Do not wear loose clothing or jewelry. Keep your hair and clothing away from moving parts.
- Avoid accidental starting. Ensure the switch is in the off-position before connecting to a power source, picking up or carrying the tool.
- Do not overreach. Keep proper footing and balance at all times.
- Use safety equipment. Always wear eye protection. Dust mask, non-skid safety shoes, hard hat, or hearing protection must be used for appropriate conditions.
- Store idle tools out of reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool.
- Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use.
- Use the power tool and accessories in accordance with these instructions, taking into account the working conditions and the work to be performed.
3. Package Contents
Your Hi-Spec Electric Screwdriver package includes the following items:
- 1 x Hi-Spec 3.6V Electric Screwdriver
- 1 x USB Charging Cable
- 20 x 25mm Screwdriver Insert Bits (various types: Torx, Hex, Slotted/Flat, Philips, Pozidriv)
- 3 x 50mm Extended Length Screwdriver Bits (Slotted 3/16", Philips PH1, Pozidriv PZ1)
- 2 x Brad Point Wood Drill Bits (3mm, 4mm)
- 1 x 50mm Magnetic Bit Connector

4. Product Features
The Hi-Spec 3.6V Electric Screwdriver is designed with user convenience and efficiency in mind:
- Magnetic Bit Holder (1/4" HEX): Allows for quick and easy bit changes.
- Forward/Reverse Switch: Effortlessly switch between tightening and loosening screws.
- Trigger Switch: Activates the screwdriver with a simple press.
- Integrated LED Lights: Illuminates the working area for improved visibility in dimly lit spaces.
- TPR Comfort Grip: Provides a comfortable and secure hold, reducing fatigue during extended use.
- USB Charging Port: Conveniently recharge the screwdriver using any standard USB power output (e.g., mobile phone charger, laptop socket).
- Compact and Lightweight Design: Easy to handle and store, perfect for small spaces and everyday tasks.

5. Technical Specifications
| Feature | Specification |
|---|---|
| Brand Name | Hi-Spec |
| Type | Cordless Screwdriver |
| Model Number | DT30324P / DT30324B |
| Power Source | Battery (DC) |
| Rated Voltage | 3.6V (4V max DC) |
| Battery Capacity | 1300 mAh (1.3Ah Li-ion) |
| Max. Torque | 3.5 Nm |
| No-load Speed | 200 rpm |
| Charge Time | 3-5 Hours |
| Screw Capacity | 6.35mm (1/4") |
| Certification | CE |
| Use | Home DIY |
| Package Weight | 0.65 kg |
| Package Dimensions | 30 x 20 x 15 cm |

6. Setup
6.1 Initial Charging
Before first use, fully charge the screwdriver. Connect the provided USB charging cable to the screwdriver's USB charging port and to a suitable USB power source (e.g., computer, USB wall adapter). The charging indicator light will show the charging status. Charging typically takes 3-5 hours.
6.2 Attaching Bits
The screwdriver features a 1/4" HEX magnetic bit holder for easy bit installation. Simply push the desired bit into the bit holder until it clicks into place. To remove, pull the bit straight out. For extended reach, use the 50mm Magnetic Bit Connector before inserting a bit.

Ensure the bit is securely seated before operating the screwdriver.
7. Operation
7.1 Powering On/Off
Press the trigger switch to activate the screwdriver. Release the trigger to stop the operation.
7.2 Forward/Reverse Operation
The screwdriver has a rocking forward/reverse switch to control the rotation direction:
- Forward (Tightening): Press the right side of the switch.
- Reverse (Loosening): Press the left side of the switch.
- Manual Use: Set the switch to the middle position for manual tightening or loosening when precision or less power is required.

7.3 LED Work Light
The integrated LED light automatically illuminates the work area when the trigger is pressed, providing better visibility.
7.4 Bit Selection
Choose the appropriate bit for the screw type and size. Using the wrong bit can damage the screw head or the bit itself.
- 20 x 25mm Screwdriver Insert Bits: Ideal for common household screws. Includes Torx, Hex, Slotted/Flat, Philips, and Pozidriv types.
- 3 x 50mm Extended Length Screwdriver Bits: For screws in recessed or hard-to-reach areas. Includes Slotted 3/16", Philips PH1, Pozidriv PZ1.
- 2 x Brad Point Wood Drill Bits (3mm, 4mm): For occasional boring or cleaning out shallow holes in soft woods or plastics.


8. Maintenance
- Cleaning: Keep the tool's ventilation openings clean to prevent overheating. Use a soft, damp cloth to clean the exterior. Do not use harsh chemicals or abrasive cleaners.
- Storage: Store the screwdriver and its accessories in a dry, secure place, away from direct sunlight and extreme temperatures. Keep out of reach of children.
- Battery Care: For optimal battery life, avoid completely draining the battery before recharging. If storing for long periods, charge the battery every 3-6 months.
9. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Screwdriver does not turn on. | Battery is depleted. | Charge the battery fully. |
| Switch is in the middle (manual) position. | Ensure the forward or reverse switch is engaged. | |
| Screws are not tightening/loosening effectively. | Incorrect bit type or size. | Select the correct bit for the screw head. |
| Battery is low. | Recharge the battery. | |
| Bit falls out of the holder. | Bit not fully inserted. | Push the bit firmly into the magnetic holder until it clicks. |
| LED light not working. | Tool not powered on. | Press the trigger switch to activate the tool and light. |
10. User Tips
- Match the Bit: Always ensure you are using the correct bit type and size for the screw. This prevents stripping the screw head and prolongs the life of your bits.
- Pre-Drill for Hard Materials: For very hard wood or materials, consider using a pilot hole with the appropriate drill bit to prevent splitting and make driving screws easier.
- Gentle Start: Begin screwing at a low speed to ensure the bit properly engages with the screw head before applying full power.
11. Warranty and Support
Your Hi-Spec Pink 3.6V Electric Screwdriver comes with a 3-Year Warranty. Please retain your proof of purchase for warranty claims.
For technical support, troubleshooting assistance, or warranty inquiries, please contact Hi-Spec customer service through the retailer where you purchased the product.
12. Product Video
Video demonstrating the features and use of the Hi-Spec Pink 3.6V Electric Screwdriver.