JGINYUE B550i GAMING

Contents

JGINYUE B550i GAMING Mini ITX Motherboard User Manual

Model: B550i GAMING

Introduction

This manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of the JGINYUE B550i GAMING Mini ITX Motherboard. This motherboard is designed for high-performance gaming PCs, supporting AMD Ryzen 4000 and 5000 series processors.

Key features include:

  • AM4 Socket for AMD Ryzen 4000 and 5000 series processors.
  • Dual channel DDR4 memory support up to 64GB.
  • PCIe 4.0 x16 slot for high-speed graphics cards.
  • Dual M.2 NVME protocol interfaces for ultra-fast storage.
  • Integrated 2.5G Network Card.
  • Multiple display outputs: 2 HDMI and 1 DisplayPort.
  • Comprehensive USB connectivity: USB 3.2 and USB 2.0 ports.

Video: A 16-second overview showcasing the JGINYUE B550i GAMING motherboard from various angles.

Setup and Installation

Security Information and Precautions

WARNING: Components in this package may be damaged by electrostatic discharge (ESD). Observe the following precautions during assembly:

  • Ensure all components are connected firmly, otherwise the computer may not recognize the components or cannot be turned on.
  • When picking up the motherboard, please hold the edge of the motherboard to avoid touching the sensitive components of the motherboard.
  • Please place the motherboard on an electrostatic shield or an anti-static mat when not installing the motherboard.
  • Please do not power on the motherboard and start the computer before the installation is completed, otherwise it may cause permanent damage to the components and harm the user.
  • Consult a professional computer technician if you need assistance during any installation step.
  • Before installing or removing any components of the computer, please turn off the power and unplug the power cord from the outlet.
  • Please keep this product manual for future reference.
  • Please keep this motherboard away from humid environment.
  • Before connecting the power supply to the power outlet, make sure your outlet provides the same indicated voltage as rated on the power supply.
  • Place the power cord in a place where people will not step on it, and do not put any items on the power cord.
  • Pay attention to all warning signs on the motherboard.

Motherboard Layout and Connectors

Familiarize yourself with the motherboard layout and various connectors before installation.

JGINYUE B550i GAMING Motherboard labeled diagram

Figure 1: Labeled diagram of the JGINYUE B550i GAMING motherboard, showing key power, data, and expansion ports including 8Pin Power supply, 4Pin*2, DDR4*2, 24Pin Power supply, USB3.0*2, USB3.0*2, Gigabit ethernet, USB2.0*2, WIFI, Audio interface, PCIEX16, and M.2 NVME.

JGINYUE B550i GAMING Motherboard detailed features

Figure 2: Detailed view of the motherboard highlighting features such as support for AMD Ryzen 4000 and 5000 series processors, DDR4*2 Dual channel memory (2133-4000MHz), 4xSATA3.0 6Gbps, and M.2 slots with automatic recognition of 3.0 or 4.0 based on CPU.

Onboard Pin Interface Description

  • 1. Motherboard 4+4pin Port: For CPU power supply. Must be plugged in before turning on.
  • 2. Motherboard 24 pin Power Supply: For overall motherboard power supply. Must be plugged in before turning on.
  • 3. F_PANEL Interface: Connects to front panel power switch (Power SW), reset switch (Reset SW), HDD LED, and Power LED. Ensure correct polarity for LEDs.
  • 4. USB 2.0 Interface: Front USB 2.0 pin.
  • 5. USB 3.0 Interface: Front USB 3.0 pin.
  • 6. Audio Interface: Front audio interface, supports AC97 and HD audio.
  • 7. COM Interface: Onboard serial output port, requires an adapter.
  • 8. Fan 3/4pin Interface: Fan pin, 4-pin supports PWM speed control, 3-pin is full speed.
  • 10. Speaker Pin: Used for power-on fault detection. The first pin on the left is positive.
  • 11. 5V ARGB/12V RGB Header: 5V3 Pin ARGB for variable RGB light, 12V4 Pin RGB for monochromatic RGB lights.
  • 12. ME Protect Pin: Some models have a two-pin ME protection function. Short-circuit it when booting if BIOS needs updating.
  • 13. 5VSB Pin: Jumper pins for USB shutdown power supply. '1-2' is power-off state, '2-3' is charged state (for wake-up/charging). 5VSB power supply can provide 2A current in charged state.
  • 14. SATA 3.0 Interface: For external SSD solid state drives or HDD mechanical hard drives.

Back I/O Interface Description

JGINYUE B550i GAMING Motherboard Back I/O Ports

Figure 3: Overview of the motherboard's back I/O ports and included accessories (baffle, WiFi antenna, SATA cable). The I/O panel includes PS/2, USB, VGA, HDMI, RJ45, DP, and Audio ports.

  • 1. PS/2 Interface: Green for mouse, Purple for keyboard.
  • 2. USB Ports: Red for USB 3.2 Gen 2, Blue for USB 3.2 Gen 1, Black for USB 2.0.
  • 3. VGA (D-sub) Interface: Legacy video output, highest support 1080P 60Hz.
  • 4. HDMI Interface: Video output interface, highest support 4K 60Hz.
  • 5. RJ45 Network Interface: Supports 1000/2500Mbps.
  • 6. DP Interface: Video output interface, highest support 4K 240Hz.
  • 7. M.2 M-Key Port: Supports CNVi or CWPCIe Dual Protocol wireless Network Card.
  • 8. Audio Interface: Green for speaker, Pink for microphone, Blue for audio output.

RAM and Expansion Card Installation

IMPORTANT:

  • Confirm memory specifications are supported by the motherboard. We suggest you use memory with the same capacity, brand, frequency, and chip.
  • Please carefully read the user manual and confirm the expansion card is compatible.
  • Always turn off power before installing.
  • The memory stick has a fool-proof design; they cannot be installed if inserted in the wrong direction.
  • Please be sure to install it from the DIMMA2 slot first.
  • Due to chipset resource usage, the available memory capacity will be slightly less than the installed usage.
  • When overclocking, the stability and compatibility of memory module depends on the installed CPU and device.

Operating Instructions

BIOS Settings

The motherboard's BIOS (Basic Input/Output System) allows configuration of hardware settings. To clear CMOS settings (reset BIOS to default), use the CLR CMOS jumper:

  • Three-pin jumper: To keep CMOS data, ensure the jumper is on pins 1-2. To clear CMOS data, move the jumper to pins 2-3 for a few seconds, then return it to 1-2.
  • Two-pin jumper: To clear CMOS data, short the two pins for a few seconds.

Refer to the motherboard diagram (Figure 1) for jumper locations.

Maintenance and Care

To ensure the longevity and optimal performance of your motherboard, adhere to the following guidelines:

  • Environmental Conditions: Avoid using the product in environments with high temperature, low air pressure, low temperature, high humidity, excessive dust, strong magnetic fields, or long-term exposure to direct sunlight.
  • Recommended Environment: Operate the motherboard in an environment with an altitude of less than 3,000 meters, a temperature range of 0 to 35°C, and a humidity of 5% to 95%.
  • Cleaning: Regularly clean dust from the motherboard and components using compressed air or a soft brush. Ensure the system is powered off and unplugged before cleaning.
  • Handling: Always handle the motherboard by its edges to prevent damage to components and static discharge.

Troubleshooting

If you encounter issues with your motherboard, consider the following common problems and solutions:

  • No Power/No Boot:
    • Ensure all power connectors (24-pin ATX, 4+4-pin CPU) are securely plugged in.
    • Check if the power supply unit (PSU) is functioning correctly.
    • Use the Speaker Pin for power-on fault detection; beep codes can indicate specific issues.
  • No Display Output:
    • Verify that the monitor is connected to the correct display output (HDMI, DP, or VGA) on the motherboard or graphics card.
    • Ensure the graphics card is properly seated in the PCIe x16 slot and has adequate power.
    • Check monitor input settings.
  • Memory Issues:
    • Ensure RAM modules are correctly seated in the DIMM slots, especially DIMMA2 first.
    • Test with one RAM module at a time to identify a faulty stick.
    • Verify RAM compatibility with the motherboard and CPU.
  • General Malfunctions:
    • If the motherboard does not work after following instructions, or if there are signs of physical damage (liquid, moisture, drops, obvious signs of damage), contact a maintenance technician.
    • Damage caused by unauthorized personnel disassembling or replacing components (e.g., CPU IHS cover, VRM Heatsink) voids warranty.

Specifications

FeatureDetail
Brand NameTFDP (JGINYUE)
ModelB550i GAMING
ChipsetAMD B550
Chipset ManufacturerAMD
Socket TypeAM4
Processor CompatibilityAMD Ryzen 4000 and 5000 series (e.g., 5600GT/5600/5700X)
Support Memory TypeDDR4 (Dual Channel)
Memory Slots2
Maximum RAM Capacity64 GB
Memory Frequency2133/2400/2666/2800/3000/3200/3333/3466/3600/3733/3866/4000MHz (varies by CPU/memory config)
PCI - E StandardsPCI-E 4.0
Number of PCI Slots1 (PCIe 4.0 x16)
Storage Interface TypeSATA (4x SATA3.0 6Gbps), M.2 NVME (2 slots)
Onboard LAN1x RJ45 (2.5G Network Card)
Back I/O Ports2x HDMI, 1x DP, 1x VGA, 1x RJ45, USB 3.2 Gen 2, USB 3.2 Gen 1, USB 2.0, PS/2, Audio Jacks
Front Panel ConnectorsFront USB 3.2, Front USB 2.0, Front Type-E 5G interface
Usage ScenarioGaming, Desktop, Server, Workstation
Dimensions17cm x 17cm (Mini ITX)
Power Supply6-phase intelligent power supply
MaterialPlastic, Aluminum, Metal
Package ContentsMotherboard, Baffle x1, WiFi Antenna x1 (for optional module), SATA line x1
JGINYUE B550i GAMING Motherboard dimensions

Figure 4: Motherboard dimensions, measuring 17cm by 17cm, indicating its Mini ITX form factor.

Warranty and Support

Warranty Statement

JGINYUE Technology provides a one-year warranty for this product in accordance with PRC regulations. Repair service will be provided within one year of purchase for problems listed in the Microcomputer Performance Failures Table published by the CCIA.

NOTE: If onboard CPU, Chipset, or other parts are damaged by human error, the buyer is responsible for replacement and repair costs. The buyer is responsible for return shipping costs. If a defective product is discontinued, a similar product may be offered at a discounted price.

Warranty Exclusions

The warranty is unavailable in the following cases:

  • Inability to provide proof-of-purchase.
  • Product is found to be trouble-free after testing.
  • Warranty has expired.
  • Man-made damages such as missing components, bent PCB, scratched PCB, oxidation corrosion, or burned CPU/main components due to incorrect usage.
  • Altered, lost, removed, or damaged Barcode/Serial number/Model label/Anti-disassembly label.
  • Damage due to irresistible force (e.g., water immersion, fire, lightning).
  • Motherboard damaged by insecure packaging or improper transportation during repair.
  • Damage caused by unauthorized personnel disassembling or replacing components (e.g., CPU IHS cover, VRM Heatsink).

Details of the warranty may vary in accordance with local laws outside of the PRC. JGINYUE reserves the right of interpretation of this statement.

Contact and Further Information

For technical support or warranty inquiries, please contact:

Email: sales@t-diagtech.com

An official user manual in PDF format is available for download: User Manual (PDF)

User Tips

  • Display Flexibility: The motherboard features two HDMI ports and one DisplayPort, offering versatile display connectivity options.
  • Customizable WiFi: The motherboard does not come with a pre-installed WiFi module. This allows users to purchase and install a WiFi module that best suits their preferences and needs.
  • RGB Connectivity: The motherboard includes 5V ARGB and 12V RGB headers, allowing for customizable lighting setups.
  • Value for ITX Builds: This motherboard offers a competitive price point for users looking to build a Mini ITX system.

Frequently Asked Questions (FAQ)

Q: Does the motherboard have a slot for RGB?
A: Yes, the motherboard features both 5V ARGB (3-pin) and 12V RGB (4-pin) headers for connecting compatible RGB lighting devices.

© 2024 JGINYUE Technology. All rights reserved. Updated: 01.2024. Made In China.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.