4G GPS Tracker Bracelet User Manual

1. Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your 4G GPS Tracker Bracelet. Designed for elderly and adult users, this device offers advanced tracking, health monitoring, and emergency communication features to ensure safety and peace of mind.

2. Product Overview

The 4G GPS Tracker Bracelet is a versatile wearable device equipped with a range of features for personal safety and health monitoring. It supports 4G LTE and 2G GSM networks for reliable communication and multi-mode positioning (GPS, Beidou, WIFI, LBS) for accurate location tracking.

Key Features:

• 4G LTE + 2G GSM Connectivity
• GPS + Beidou + WIFI + LBS Multi-mode Positioning
• Heart Rate, Blood Pressure, and Temperature Detection
• SOS Button for Emergency Calls
• Two-way HD Call with Auto-pickup
• Pill Reminder, Step Counting, and Health Management
• IPX7 Waterproof Rating
• Fall Alarm and Take-off Alarm
• Talking Clock and Speed Dial
• Low Battery Alarm
• Web Platform and Mobile App for Remote Monitoring

Device Components:

3. Specifications

Note: GPS is primarily for outdoor use. Positioning will automatically switch to LBS/WIFI indoors.

4. Setup Guide

4.1 SIM Card Installation

1. Ensure the bracelet is **powered off** before installing the SIM card.
2. Before inserting, ensure the SIM card's PIN code is disabled. This can usually be done by inserting the SIM into a mobile phone and disabling the PIN through its settings.
3. Verify that the SIM card has an active GPRS data plan. This is essential for the bracelet's tracking and communication features.
4. Carefully insert the SIM card into the designated slot on the bracelet. Refer to the device diagram for correct orientation.
5. Power on the bracelet.

4.2 Initial Configuration

1. Download the companion mobile application or access the web platform for monitoring. The application name or web address should be provided with your product packaging or by the seller.
2. Register an account and add your device using the ID/IMEI found on the back of the bracelet (refer to Product Overview image).
3. Set up emergency (SOS) contact numbers within the application. The bracelet supports presetting up to 3 SOS numbers.
4. Configure other settings such as Geo-fence zones, pill reminders, and alarm preferences through the application.

5. Operating Instructions

5.1 Emergency SOS Call

In an emergency, press and hold the large red SOS button for 5 seconds. The bracelet will automatically dial the preset SOS numbers in sequence until one is answered. An alarm will also be triggered.

5.2 Two-Way Communication

The bracelet supports two-way HD calls. When a call is received from a pre-approved number, the bracelet can be set to auto-pickup for easier communication, especially for users with limited mobility.

5.3 Health Monitoring

The bracelet continuously monitors heart rate, blood pressure, and body temperature. These readings can be viewed on the connected mobile application, providing insights into the wearer's health status and helping to identify potential risks.

5.4 Location Tracking

Utilize the mobile app or web platform to view the bracelet's real-time location. Features like Geo-fence allow you to set safe zones and receive alerts if the wearer enters or exits these areas. Motion route history is also available.

5.5 Other Functions

• Pill Reminder: Set up medication reminders through the app.
• Step Counting: Track daily steps for activity monitoring.
• Fall Alarm: Automatic alerts if a fall is detected.
• Take-off Alarm: Notifies if the bracelet is removed from the wrist.
• Talking Clock: Announces the time audibly.
• Ringtone Search: Use the app to make the bracelet ring, helping to locate it if misplaced nearby.

6. Maintenance

6.1 Charging

Charge the bracelet using the provided magnetic charging cable. Align the magnetic connector with the charging port on the back of the device. A full charge typically takes a few hours. The device will alert you when the battery is low.

6.2 Waterproofing

The bracelet has an IPX7 waterproof rating, meaning it can withstand splashes, rain, and brief immersion in water (up to 1 meter for 30 minutes). It is suitable for daily wear, including showering or swimming in shallow water. However, avoid prolonged submersion or exposure to hot water/steam.

6.3 Cleaning

Wipe the bracelet regularly with a soft, damp cloth to remove dirt and sweat. Avoid using harsh chemicals or abrasive materials that could damage the device.

7. Troubleshooting

7.1 App Shows "Not Enabled" After SIM Card Installation

1. Check SIM Card PIN: Ensure the SIM card's PIN code has been deleted. Insert the SIM into a mobile phone to disable the PIN if necessary.
2. GPRS Data Plan: Confirm that the SIM card has an active GPRS data plan. Without data, the bracelet cannot communicate with the app/platform.
3. Power Off During Installation: Always install the SIM card when the bracelet is powered off. Power on the device after insertion.
4. Test Call: Try making a call to the bracelet's phone number. If the call connects, the SIM card is recognized.
5. APN Settings: If the call connects but the app still shows "Not enabled," the Access Point Name (APN) settings might be incorrect. Send the SMS command `pw,123456,ts#` to the bracelet. If you receive a reply, the network positioning is normal, and you may need to manually set the APN. Contact your SIM card provider for the correct APN settings and consult the seller for instructions on how to send APN commands via SMS.
6. SIM Card Insertion: If you cannot make a call to the bracelet, the device may not be recognizing the SIM card. Check if the SIM card is inserted in the correct direction and ensure it is fully seated. Re-insert the SIM card and power cycle the device.

8. User Tips

• Network Compatibility: Before purchasing a SIM card, verify with your local network provider that their 4G LTE and 2G GSM bands are compatible with the bracelet. This ensures optimal performance and connectivity in your region.
• Regular Charging: To ensure continuous monitoring and emergency readiness, establish a routine for charging the bracelet.
• App Notifications: Enable notifications for the companion app on your smartphone to receive timely alerts for SOS calls, fall detections, low battery, and geo-fence breaches.
• Test SOS Function: Periodically test the SOS call function with your emergency contacts to ensure it is working correctly and that they understand their role.

9. Warranty and Support

For any product-related inquiries, technical support, or warranty claims, please contact the seller, Libor Automation & Security Store, directly through the platform where you made your purchase. Provide your order details and a clear description of the issue for prompt assistance.