GODIAG GT110 GT111 GT112 GT114

Contents

GODIAG VAG IMMO Prog Test Platform User Manual

Models: GT110, GT111, GT112, GT114

For VW, Skoda, Seat, and Audi Dashboard IMMO Key Matching Test

1. Introduction

The GODIAG GT series cables (GT110, GT111, GT112, GT114) are specialized test platforms designed for VAG group vehicles (VW, Skoda, Seat, Audi). These cables facilitate various immobilizer (IMMO) related functions, including key matching, dashboard IMMO system testing, data reading and writing, and mileage repair. They are essential tools for automotive locksmiths and technicians working with VAG vehicle immobilizer systems.

Overview of all GODIAG GT series cables (GT110, GT111, GT112, GT114)
Figure 1: Overview of GODIAG GT Series Cables

These cables can be used in conjunction with various diagnostic devices such as HEX V2, VAGCOM VCDS 5053, VAS5054A, VAS6154, SUPER VAG K+CAN, Obdstar, Lonsdor, AVDI, ZEDFULL, VVDI2, Key Tool Plus, X300 DP Plus, and AUTEL.

2. Product Components and Functions

The GODIAG GT series includes several specialized cables, each designed for specific VAG IMMO systems:

  • GODIAG GT110: For VW /Skoda /Seat CAN-Bus UDS 4th Generation IMMO System Test Platform Cable with POGO PIN to Read & Write POGO PIN Data.
  • GODIAG GT111: For VW /Skoda /Seat CAN-Bus 3rd & 3.5th Generation Dashboard IMMO Key Matching Test Platform Cable with POGO PIN to Read & Write Data.
  • GODIAG GT112 K-Line: For VW /Skoda /Seat 2nd & 3rd Generation Dashboard IMMO Key Matching Test Platform Cable.
  • GODIAG GT114: For Audi K-Line IMMO for Audi A4 A6 C5 2nd & 3rd Generation Dashboard IMMO Key Matching Test Platform Cable.
Set of GODIAG GT110, GT111, GT112 cables and POGO PIN
Figure 2: GODIAG GT110, GT111, GT112 Cables and POGO PIN
GODIAG GT114 cable for Audi K-Line IMMO with packaging
Figure 3: GODIAG GT114 Cable for Audi K-Line IMMO

3. Setup Instructions

The GODIAG GT series cables are designed for offline connection to the vehicle's dashboard or immobilizer system. The general setup involves connecting the appropriate GT cable to the vehicle's dashboard and a compatible diagnostic tool.

3.1 General Connection Steps

  1. Identify the correct GODIAG GT cable for your vehicle's IMMO generation and communication protocol (K-Line or CAN-Bus).
  2. Connect the vehicle-specific connector of the GT cable to the corresponding port on the vehicle's dashboard or IMMO module.
  3. Connect the OBD2 connector of the GT cable to your diagnostic device (e.g., HEX V2, VAGCOM VCDS).
  4. Ensure all connections are secure before powering on the diagnostic device or the GT cable (if it has an independent power switch).
  5. For cables with POGO PIN functionality (GT110, GT111), ensure the POGO PIN is correctly positioned for data reading/writing without damaging the cable or dashboard.

3.2 Key Components Overview

Close-up of the GODIAG GT110 IMMO Prog AD Test Platform with POGO PIN and key induction adapter
Figure 4: GODIAG GT110 with POGO PIN and Key Induction Adapter
Detailed view of the key induction adapter
Figure 5: Key Induction Adapter
Detailed view of the power input and ignition switch button
Figure 6: Power Input and Ignition Switch Button
Detailed view of the OBD2 connector labeled IMMO Prog GT112
Figure 7: OBD2 Connector (GT112 example)

4. Operating Instructions

4.1 Key Chip and Instrument Synchronization Test

The cables allow for performing key chip and instrument synchronization tests. This is crucial for ensuring that new keys are correctly recognized by the vehicle's immobilizer system.

  • Connect the appropriate GT cable to the dashboard and your diagnostic tool.
  • Follow the instructions on your diagnostic tool to initiate the key matching or synchronization procedure.
  • Use the key induction adapter (if applicable) to test the key's communication with the IMMO system.

4.2 Intelligent IMMO System Emergency Start Area Sensing Detection

This feature helps identify the vehicle's emergency start sensing area, useful when a smart key's battery is depleted.

  1. Press the vehicle's start switch (without the key).
  2. Bring the device's key induction adapter close to different areas of the vehicle's interior (e.g., steering column, center console).
  3. If the key induction adapter's light flashes or lights up continuously, that area is the vehicle's key emergency start sensing area.
  4. In case of a dead smart key, place the key in this identified area to start the vehicle.

4.3 Car IMMO Start and Start Key Chip Detection

This function helps verify the proper operation of the IMMO chip and key.

Test Result Analysis:

  • Light of the key induction adapter flashes and then goes out: Indicates that the IMMO chip and the chip key are working properly and are synchronized.
  • Light of the key induction adapter flashes for a long time: Indicates that the chip key and the vehicle's IMMO system do not match. The chip key needs to be re-matched or programmed.
  • Light of the key induction adapter does not flash: Suggests that the vehicle's IMMO system is faulty. Further diagnosis of the vehicle's IMMO system is required.

4.4 Other Functions

  • Offline connection to the dashboard to convert to standard OBD2: Allows diagnostic tools to communicate with the dashboard via a standard OBD2 interface even when the dashboard is removed from the vehicle.
  • Independent ignition switch: Provides a dedicated switch to control ignition power during testing, preventing accidental power cycles.
  • Instrument IMMO data reading and writing: Enables technicians to read and write immobilizer data directly from/to the instrument cluster.
  • Instrument mileage repair: Supports adjustment or repair of mileage data in the instrument cluster (use responsibly and legally).
Video 1: Demonstration of GODIAG GT110, GT111, and GT112 cable features and connections.

5. Maintenance

  • Store the cables in a clean, dry environment away from direct sunlight and extreme temperatures.
  • Avoid bending or kinking the cables excessively to prevent internal wire damage.
  • Clean connectors regularly with a soft, dry cloth. Do not use harsh chemicals.
  • Inspect connectors and cables for any signs of wear or damage before each use.
  • When using the POGO PIN, ensure gentle and precise contact to avoid damaging the dashboard's pins.

6. Troubleshooting

  • No communication with diagnostic tool:
    • Check all cable connections to ensure they are secure.
    • Verify that the correct GT cable is being used for the vehicle's IMMO generation.
    • Ensure the diagnostic tool is properly configured and updated.
    • Check the vehicle's power supply and the GT cable's independent power switch (if applicable).
  • Key matching failure:
    • Refer to the "Car IMMO Start and Start Key Chip Detection" section for interpreting key induction adapter light signals.
    • Ensure the key chip is compatible with the vehicle's IMMO system.
    • Verify that the diagnostic tool's software is up-to-date and supports the specific key matching procedure.
  • POGO PIN not reading/writing data:
    • Ensure the POGO PIN makes firm and correct contact with the dashboard's pins.
    • Check for any debris or damage on the POGO PIN or dashboard pins.
    • Verify that the GT cable supports POGO PIN functionality for the specific task.

7. Specifications

Feature Detail
Brand Name GODIAG
Origin Mainland China
Certification CE
Package Length 16 cm
Package Width 12 cm
Package Height 4 cm
Package Weight 0.163 kg

8. User Tips

  • Always ensure the correct cable is selected for the specific vehicle model and IMMO generation to avoid compatibility issues.
  • When performing sensitive operations like mileage repair or IMMO data writing, always back up original data if your diagnostic tool allows it.
  • Maintain a stable power supply to both the GT cable and your diagnostic tool during operations to prevent interruptions.
  • For optimal performance and longevity, handle the cables with care, especially the POGO PIN, to prevent damage.

9. Warranty and Support

GODIAG products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the official GODIAG website or contact your authorized dealer. Keep your purchase receipt for warranty claims.

10. Package Contents

The complete package typically includes:

  • 1 x GODIAG GT110 Test Platform Cable
  • 1 x GODIAG GT111 Test Platform Cable
  • 1 x GODIAG GT112 Test Platform Cable
  • 1 x GODIAG GT114 Test Platform Cable
Close-up of the GODIAG GT111 IMMO Prog cable
Figure 8: GODIAG GT111 Cable
Close-up of the GODIAG GT112 K-Line IMMO Prog cable
Figure 9: GODIAG GT112 K-Line Cable
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.