Bileeko 12V European/UK License Plate Rear View Camera & Parking Sensor Set

Contents

Bileeko 12V European/UK License Plate Rear View Camera & Parking Sensor Set

User Instruction Manual

1. Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Bileeko 12V European/UK License Plate Rear View Camera and Parking Sensor Set. This system is designed to enhance vehicle safety by providing a clear rear view and assisting with parking maneuvers. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Key Features

  • High-Quality Imaging: Equipped with a CMOS imaging sensor for clear visuals.
  • Wide Viewing Angle: 170° view to eliminate blind spots and aid in parking.
  • Night Vision: Available with 4 or 8 integrated LEDs for improved visibility in low-light conditions.
  • Distance Scale Lines: Built-in guiding lines on the display to assist with obstacle avoidance during reversing.
  • Durable Design: Water-proof, shock-proof, and anti-jamming functions ensure reliability in various conditions.
  • Easy Installation: Snap-in design for straightforward mounting on European/UK license plates.
  • Video Output: Standard composite yellow RCA jack for compatibility with various monitors.
  • Automatic Video System: Supports NTSC / PAL automatic switching.
  • Power: Operates on DC 12V.

3. Specifications

Attribute Value
Material (Shell) Plastic (ABS)
Lens Material Plastic + Glass
Dimensions (L x W x H) 545 x 140 x 30mm
Resolution 420 TV lines
Effective Pixels 300,000
Working Voltage DC 12V
Power Consumption <1W
Minimum Illumination 0.1 Lux
Video Output 1.0vp-p, 75 Ohm
Photosensitive Area 4.08mm x 3.12mm
Working Temperature -20°C to +80°C (RH95% Max)
Electronic Shutter (N)1/60-1/100000 (P)1/50-1/100000
Viewing Angle 170°
Video Cable Length 6 meters
Alarm Type ACCESSORIES, Rear Side
Certification CE

4. Package Contents

Depending on the selected variant, your package will contain one of the following:

  • Wired Set: 1 x License Plate Camera (4 or 8 LED), 1 x 6m Video Cable, 1 x 1m Power Cable.
  • Wireless Set: 1 x License Plate Camera (4 or 8 LED), 1 x 6m Video Cable, 1 x 1m Power Cable, 2 x 2.4G Wireless Receiver/Transmitter.
Wired camera components: 6m video cable and 1m power cable.
Figure 1: Wired camera components including 6m video cable and 1m power cable.
2.4G Wireless Receiver Transmitter for wireless camera setup.
Figure 2: The 2.4G Wireless Receiver Transmitter for wireless camera setups.

5. Setup and Installation

5.1. Mounting the License Plate Camera

  1. Remove your existing European or UK license plate from its mounting location.
  2. Position the Bileeko license plate camera frame behind your license plate. The camera should be oriented correctly to face outwards from the rear of the vehicle.
  3. Secure the license plate and the camera frame using the original mounting screws. The snap-in design ensures a snug fit.
License plate holder with integrated camera, illustrating European/UK plate compatibility.
Figure 3: License plate holder with integrated camera, compatible with European/UK plates.
License plate camera with 4 LED and 8 LED options, showing installation on a car.
Figure 4: The license plate camera installed on a vehicle, showing 4 LED and 8 LED options.

5.2. Wiring (Wired Version)

  1. Power Connection: Connect the red wire of the camera's power cable (1m) to the positive (+) terminal of your vehicle's reverse light circuit. Connect the black wire to a suitable ground point (-). This ensures the camera powers on automatically when the vehicle is put into reverse.
  2. Video Connection: Connect the yellow RCA connector of the camera's video cable (6m) to the video input (usually yellow RCA) of your car's monitor or head unit.
  3. Route the cables carefully, ensuring they are secured and protected from heat, sharp edges, and moving parts.

5.3. Wiring (Wireless Version)

  1. Transmitter Connection: Connect the camera's power cable to the 2.4G wireless transmitter. Connect the transmitter's power wires to the vehicle's reverse light circuit (red to positive, black to ground). Connect the camera's video output to the transmitter's video input.
  2. Receiver Connection: Connect the 2.4G wireless receiver's power wires to a 12V power source (e.g., accessory power or the monitor's power supply). Connect the receiver's video output to the video input of your car's monitor or head unit.
  3. Ensure both transmitter and receiver are positioned for optimal signal transmission, avoiding large metal obstructions.

5.4. Adjusting Camera Angle

The camera features an adjustable angle. After installation, power on the system and adjust the camera's position to achieve the desired viewing angle on your monitor. Secure the camera in place once the optimal angle is found.

Close-up of the camera showing angle adjustment mechanism.
Figure 5: The camera's adjustable angle feature.

6. Operating Instructions

  1. Activate Reverse Gear: When you shift your vehicle into reverse gear, the camera system will automatically power on.
  2. Monitor Display: The rear view image will appear on your connected monitor. Distance scale lines will be overlaid on the image to assist with judging distances to obstacles.
  3. Night Vision: In low-light conditions, the integrated LEDs (4 or 8 depending on model) will automatically illuminate to provide enhanced night vision.
  4. Parking Assistance: Use the displayed image and guiding lines to safely maneuver your vehicle while reversing.
In-car monitor displaying the rear view from the license plate camera with parking lines.
Figure 6: Rear view displayed on an in-car monitor, showing parking lines.

7. Maintenance

  • Cleaning the Lens: Regularly clean the camera lens with a soft, damp cloth to ensure a clear view. Avoid abrasive cleaners that could scratch the lens.
  • Checking Connections: Periodically inspect all cable connections to ensure they are secure and free from corrosion or damage.
  • Frame Inspection: Check the license plate frame for any signs of damage or loosening, especially after driving on rough terrain.

8. Troubleshooting

Problem Possible Cause Solution
No image on monitor
  • Camera not receiving power.
  • Video cable disconnected or damaged.
  • Monitor input not selected or faulty.
  • (Wireless) Transmitter/receiver not powered or out of range.
  • Check power connections to reverse light circuit.
  • Ensure video cable is securely connected to both camera and monitor.
  • Select correct video input on monitor.
  • (Wireless) Check power to transmitter/receiver, ensure they are within range and paired.
Flickering or distorted image
  • Loose video connection.
  • Power supply instability.
  • Interference from other electronic devices.
  • (Wireless) Weak signal or interference.
  • Secure all video cable connections.
  • Check vehicle's electrical system for stable 12V supply.
  • Ensure proper grounding.
  • (Wireless) Reposition transmitter/receiver, check for obstructions.
Poor night vision
  • LEDs are dirty or obstructed.
  • Faulty LEDs.
  • Clean the camera lens and LEDs.
  • Contact support if LEDs are confirmed faulty.

9. User Tips

  • Test Before Final Mounting: Before fully securing all components and routing cables, temporarily connect the system to ensure it functions correctly. This can save time and effort in case adjustments are needed.
  • Waterproofing Connections: Although the camera is waterproof, ensure all cable connections (especially power and video RCA plugs) are properly sealed with electrical tape or heat shrink tubing to prevent moisture ingress, which can lead to corrosion and signal issues.
  • Optimal Angle Adjustment: Experiment with the camera's adjustable angle to find the best view that covers your vehicle's rear bumper and provides a clear perspective of potential obstacles.

10. Warranty and Support

For specific warranty information, return policies, or technical support, please refer to the seller's terms and conditions or contact the seller directly through your purchase platform. Keep your proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.