Accessory Silicone Air Fryer Mould

Contents

Silicone Air Fryer Mould Instruction Manual

Model: Silicone Air Fryer Mould

Brand: Accessory

Introduction

This manual provides instructions for the safe and effective use of your new Silicone Air Fryer Mould. This reusable accessory is designed to enhance your air frying experience by simplifying cleanup and expanding cooking possibilities. Made from food-grade silicone, it is compatible with Philips 4.2L Airfryer Series 2000 (NA229/00) and 3000 (NA320/00) models.

Product Features

  • Food-Grade Silicone: Made from BPA-free, high-quality silicone for safe cooking.
  • High Temperature Resistant: Withstands temperatures up to 230℃.
  • Non-Stick Surface: Ensures healthy cooking with less oil and easy food release.
  • Ergonomic Design: Features anti-scald side handles for secure removal and a raised bottom for improved air circulation and fat separation.
  • Reusable & Eco-Friendly: A sustainable alternative to disposable baking paper.
  • Easy to Clean: Dishwasher safe and cleans easily with a rinse.
  • Versatile Use: Suitable for air fryers, ovens, and microwaves for grilling, roasting, reheating, and thawing.
Silicone Air Fryer Mould features: Food Grade Silicone, High Temperature Resistant, Reusable, Easy to Use
Key features of the Silicone Air Fryer Mould.

Setup

  1. Unpack: Carefully remove the silicone mould from its packaging.
  2. Initial Cleaning: Before first use, wash the mould thoroughly with warm soapy water or place it in a dishwasher. Rinse and dry completely.
  3. Placement: Ensure your air fryer basket is clean and dry. Place the silicone mould directly into the air fryer basket.
  4. Food Preparation: Place your food directly into the silicone mould. Do not overfill the mould; leave space for air circulation.
Video demonstrating how to place the silicone mould into an air fryer basket.
Silicone baking tray inside a Philips Airfryer with chicken
The silicone mould placed inside a Philips Airfryer basket, ready for cooking.

Operating Instructions

Once the silicone mould is placed in the air fryer basket with food, operate your air fryer as per its manufacturer's instructions. The silicone mould is designed to withstand typical air frying temperatures up to 230℃.

  • Always ensure the mould is properly seated in the air fryer basket.
  • Use the anti-scald side handles for safe removal of the mould from the air fryer basket after cooking.
  • The raised bottom design helps to drain excess fat, contributing to crispier results.
  • This mould can also be used in conventional ovens and microwaves.
Variety of foods cooked in silicone air fryer moulds
The versatile silicone mould is ideal for cooking a variety of foods.

Maintenance and Cleaning

Proper maintenance ensures the longevity and hygiene of your silicone air fryer mould.

  • After Each Use: Allow the mould to cool down before handling.
  • Hand Washing: Wash with warm water and mild dish soap. The non-stick surface makes cleaning easy.
  • Dishwasher Safe: For convenience, the silicone mould is dishwasher safe. Place it on the top rack for best results.
  • Storage: Store in a clean, dry place away from direct sunlight.
Comparison of greasy air fryer basket and clean basket with silicone liner
Using the silicone mould helps keep your air fryer basket clean, extending its life.

Troubleshooting

  • Food Sticking: Although non-stick, some foods may stick. A light spray of cooking oil before adding food can help. Ensure the mould is clean and dry before use.
  • Mould Not Fitting: Verify that your air fryer is a Philips 4.2L model (Series 2000 NA229/00 or Series 3000 NA320/00). The mould is specifically designed for these dimensions.
  • Discoloration: Over time, silicone may slightly discolor with heavy use, especially with certain foods. This is normal and does not affect performance or safety.
  • Smoke from Air Fryer: If you notice excessive smoke, it's usually due to grease buildup in the air fryer basket itself, not the silicone mould. Ensure both the mould and the air fryer basket are thoroughly cleaned.

Specifications

AttributeDetail
Model NumberSilicone Air Fryer Mould
MaterialFood-Grade Silicone
CompatibilityPhilips 4.2L Airfryer Series 2000 (NA229/00), Series 3000 (NA320/00)
Dimensions (Approx.)Length: 20 cm (7.87 in), Width: 17.5 cm (6.89 in), Height: 7 cm (2.76 in)
Temperature ResistanceUp to 230℃
FeaturesEco-Friendly, Stocked, Non-Stick, Reusable, Dishwasher Safe
TypeBaking Dishes & Pans (Au Gratin Dishes)
OriginMainland China
Product size diagram showing dimensions: 20cm/7.87in length, 17.5cm/6.89in width, 7cm/1.5cm/0.6in height
Detailed dimensions of the silicone air fryer mould.

User Tips

  • For best results, preheat your air fryer with the silicone mould inside for a few minutes before adding food.
  • When cooking foods that release a lot of liquid or fat, the high edges of the mould help contain spills and keep your air fryer cleaner.
  • Consider purchasing two moulds (one black, one grey) for different cooking needs or to alternate during cleaning.

Warranty and Support

This product is designed for durability and performance. If you encounter any issues or have questions regarding its use, please contact the seller or manufacturer for assistance. Keep your purchase records for any potential support inquiries.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.