1. Introduction
The OLOPKY AZDOME OBD Hardwire Kit is designed to provide a continuous power supply to your compatible AZDOME dash camera, enabling 24-hour parking surveillance. This kit connects directly to your vehicle's On-Board Diagnostics (OBD) port, offering a clean installation without occupying the cigarette lighter socket. It features multiple safety protections to safeguard both your dash cam and your vehicle's battery.
2. Package Contents
- 1 x AZDOME OBD Hardwire Kit (Micro USB or Type C variant, as selected)
3. Specifications
| Feature | Specification |
|---|---|
| Model Name | AZDOME Hardwire Kit OBD |
| Brand Name | OLOPKY |
| Item Type | Cables, Adapters & Sockets |
| Interface | USB 2.0 (Micro USB / Type C) |
| Voltage | 5V |
| Out Power | 5V2.5A |
| Item Weight | 0.15kg |
| Cable Length | 3.5M |
| Material | ABS |
| Special Features | 24H Parking Monitor |
4. Compatibility
This OBD Hardwire Kit is designed for use with various AZDOME dash camera models. Please ensure your dash cam has either a Micro USB or Type C power input, corresponding to the variant of the hardwire kit you have purchased.
Compatible AZDOME Dash Cam Models:
- M550 Pro, M550 Max, M300S, M660, M580, GS63H Pro
- AR09, AR12, M01PRO, M27S, M300, M580, M550, M660, M550PRO, PG17, M330, GS63H, BN03

5. Safety Information and Protections
The AZDOME OBD Hardwire Kit is engineered with multiple protection features to ensure safe and reliable operation:
- Safety Protection: General safeguards for connected devices.
- Input Short-Circuit Protection: Prevents damage from short circuits at the input.
- Output High Voltage Protection: Protects the dash cam from excessive voltage output.
- Overcurrent Protection: Guards against damage from current surges.
- Short-Circuit Protection: Comprehensive short-circuit prevention.
- Overtemperature Protection: Prevents overheating of the device.
- Low Voltage Monitoring: Automatically cuts power to the dash cam if the car battery voltage drops below a safe level, preventing battery drain.

6. Setup and Installation
The AZDOME OBD Hardwire Kit offers easy installation, providing a dedicated power source for your dash cam's parking monitoring function.
- Locate your vehicle's OBD-II Port: This port is typically found under the dashboard on the driver's side, though its exact location can vary by vehicle model. Consult your vehicle's manual if you have difficulty locating it.
- Connect the Hardwire Kit: Plug the OBD connector of the hardwire kit firmly into your vehicle's OBD-II port.
- Route the Cable: Carefully route the 3.5-meter cable from the OBD port to your dash camera's mounting location. Ensure the cable is tucked away neatly and does not interfere with driving controls or airbags. Use cable clips if necessary.
- Connect to Dash Cam: Plug the Micro USB or Type C connector (depending on your kit variant) into the corresponding power input port on your AZDOME dash camera.
- Test the Connection: Start your vehicle to ensure the dash cam powers on. Then, turn off your vehicle and observe if the dash cam enters parking monitoring mode (if supported and enabled).
This hardwire kit draws power directly from the OBD port, freeing up your car's cigarette lighter socket for other devices.

7. Operating Instructions
Once installed, the OBD Hardwire Kit enables enhanced functionality for your compatible AZDOME dash camera:
- 24-Hour Parking Monitoring: The kit provides continuous power to your dash cam, allowing it to automatically enter time-lapse recording mode or event-triggered recording when your car is turned off. This ensures constant surveillance and can save emergency video if a collision is detected while parked.
- Intelligent Identification Automatic Start and Stop: The kit intelligently manages power, preventing the dash cam from activating its parking monitoring function during brief stops (e.g., at traffic lights) and ensuring it correctly triggers when the vehicle is genuinely parked and turned off.
- Low Voltage Monitoring: The built-in low voltage protection monitors your car battery's voltage. If the voltage drops below a safe threshold, the hardwire kit will automatically cut power to the dash cam to prevent excessive battery drain, ensuring your vehicle can start.


8. Maintenance
- Regular Inspection: Periodically check the connections of the hardwire kit to the OBD port and the dash cam to ensure they are secure.
- Cable Management: Ensure the cable remains neatly routed and is not pinched or exposed to excessive wear and tear.
- Keep Clean: Wipe the hardwire kit and connectors with a dry, soft cloth if they become dusty. Do not use liquid cleaners.
9. Troubleshooting
- Dash Cam Not Powering On:
- Ensure the OBD hardwire kit is securely plugged into both the vehicle's OBD port and the dash cam.
- Verify that your vehicle's battery has sufficient charge. The low voltage protection feature will prevent the dash cam from drawing power if the battery voltage is too low.
- Check if the dash cam itself is functioning correctly by testing it with its original power adapter.
- Parking Monitoring Not Working:
- Confirm that your AZDOME dash cam model supports 24-hour parking monitoring and that the feature is enabled in the dash cam's settings.
- Ensure the hardwire kit is correctly installed and providing continuous power.
- Some dash cams require specific settings for parking mode (e.g., motion detection, time-lapse). Refer to your dash cam's manual.
- Incorrect Port Type:
- Ensure you have purchased the correct variant of the hardwire kit (Micro USB or Type C) that matches your dash cam's power input port.
10. User Tips
- Verify Port Type: Before purchasing, always double-check whether your dash cam requires a Micro USB or Type C connector to ensure compatibility.
- Check Dash Cam Model: Confirm your specific AZDOME dash cam model is listed as compatible to ensure full functionality, especially for advanced parking monitoring features.
- Cable Routing: Take your time to route the cable neatly along the vehicle's interior trim. This not only improves aesthetics but also prevents the cable from becoming a hazard or getting damaged.
11. Warranty and Support
For warranty information, technical support, or any product-related inquiries, please contact the seller or manufacturer directly through the platform where the product was purchased. Keep your purchase receipt or order details handy for faster service.