1. Introduction
This manual provides essential information for the safe and effective use of the Jiayin JYPC-5 Electromagnetic Water Pump. This high-quality booster pump is designed for professional use, offering stable and durable performance. It serves as a repair or replacement part for various appliances, including steam hanging and ironing machines, dishwashers, sweeping robots, dental impactors, vacuum packaging machines, car inflation pumps, smart toilets, and steam ovens.
2. Safety Instructions
Please read and understand all safety warnings before installation and operation to prevent injury or damage to the product.
- Power-Off Operation: Always disconnect the power supply before performing any maintenance, installation, or troubleshooting.
- No Dry Running: Do not operate the pump without liquid. Dry running can cause severe damage to the pump components.
- Liquid Only: Use only clean, particle-free liquid to prevent clogging and ensure optimal performance.
- Choking Hazard: This product contains small parts. Keep out of reach of children under 3 years of age.
- Certification: The product is CE certified, indicating compliance with European safety standards.
3. Package Contents
The package includes:
- 1 x Jiayin JYPC-5 Electromagnetic Water Pump
4. Specifications
| Parameter | Value |
|---|---|
| Product Model | JYPC-5 |
| Voltage | AC 220V-240V |
| Power | 45W |
| Frequency | 50Hz |
| Material | Metal |
| Structure | Booster Pump |
| Pressure | High Pressure |
| Maximum Pressure | 9 bar |
| Average Flow Rate | 550 cc/min |
| Noise Level | ~60dB |
| Dimensions (Approx.) | 12.80 cm (5.03 inch) Length, 3.20 cm (1.25 inch) Height |
| Origin | Mainland China |
| Certification | CE |
5. Installation
Proper installation is crucial for the pump's performance and longevity.
- Vertical Mounting: Ensure the pump is installed in a stable and upright position.
- Inlet/Outlet Sealing: Securely seal all inlet and outlet connections to prevent any liquid leakage.
- Inlet Filtration: Install a suitable filter at the pump's inlet to remove impurities from the liquid, preventing clogging and damage.
6. Operation
The JYPC-5 pump is designed for integration into various appliances requiring a booster pump for liquid transfer. Once installed and connected to the power supply (AC 220V-240V, 50Hz), the pump will operate according to the appliance's control system. Ensure the pump is always supplied with clean, particle-free liquid during operation to prevent damage.
7. Maintenance
Regular maintenance helps ensure the longevity and optimal performance of your JYPC-5 pump.
- Regular Cleaning: Periodically inspect and clean the inlet filter to prevent blockages.
- Check for Leaks: Regularly inspect all connections for any signs of liquid leakage and tighten as necessary.
- Component Inspection: Check seals and tubing for wear and tear. Replace any worn components promptly.
8. Troubleshooting
Refer to the following table for common issues and their solutions:
| Problem | Possible Cause / Solution |
|---|---|
| No Liquid Output | Bleed air from the system, clean the inlet filter, or check the power supply connection. |
| Low Pressure | Replace worn seals, tighten tubing connections, or remove any debris obstructing the flow. |
| Excessive Noise | Reinforce the pump's mounting, clean the pump, or replace the plunger if worn. |
9. User Tips
- When replacing the pump, ensure to match the voltage (220V-240V) and frequency (50Hz) to your appliance's requirements.
- For specific dimensions like the diameter of the threaded part outlet and thread pitch, it is recommended to measure the existing component or consult the appliance's service manual for compatibility before purchase.
10. Warranty and Support
For warranty information or technical support, please refer to the documentation provided with your original appliance or contact the manufacturer of the appliance in which this pump is installed. For additional product information, you may consult the User Manual (PDF).