pinmany FDC13

Contents

Pinmany Car Radio Cable 16-pin Power Wiring Harness Adapter with CAN Bus Decoder

Model: FDC13 | Brand: pinmany

1. Introduction

This manual provides detailed instructions for the installation and setup of the Pinmany Car Radio Cable 16-pin Power Wiring Harness Adapter with CAN Bus Decoder (Model FDC13). This product is designed to seamlessly integrate an aftermarket Android head unit with your vehicle's existing electrical system, providing essential control signals without damaging the original car wiring. Please read this manual carefully before proceeding with installation.

Pinmany FDC13 Car Radio Cable with CAN Bus Decoder
Figure 1: Pinmany FDC13 Car Radio Cable with CAN Bus Decoder components.

2. Product Overview

The FDC13 wiring harness and CAN Bus decoder system provides the necessary connections and signal translation for installing an Android head unit in compatible Ford vehicles. It ensures that functions such as ACC (Accessory), reverse gear, parking, lights, and steering wheel controls are properly transmitted to the new head unit.

2.1. Package Contents

  • 1 x Power Wire Harness
  • 1 x FM Antenna Harness
  • 1 x USB Wire Harness
  • 1 x CAN-Bus Box (Hiworld)
Power Wire Harness components
Figure 2: Detailed view of the Power Wire Harness, showing the 16-pin connector for the Android head unit and various car cable harness connectors (24-pin, 26-pin, 12-pin, 54-pin).
FM Antenna Harness
Figure 3: FM Antenna Harness for connecting to the car's antenna and the Android head unit.
USB Wire Harness
Figure 4: USB Wire Harness for connecting to the Android head unit and the car's USB port.

3. Specifications

FeatureSpecification
Model NameFDC13
Brand Namepinmany
Item TypeCables, Adapters & Sockets
Special FeaturesHarness connector
IS It With PCBYes
Voltage12 V
Interface16-pin
Item Weight170g
CANBus BrandHiworld
Suitable Head unitAndroid 7'/9'/10'/etc (7, 8, 9, 10 inch)
Suitable Car ModelsFord Ranger, Focus, Edge, Kuga, Everest (2015+ models, check compatibility)

4. Installation

This product is designed for a plug-and-play installation, minimizing the need for wire cutting. However, careful attention to connections and head unit compatibility is crucial.

4.1. Pre-installation Check

Before beginning installation, ensure compatibility with your vehicle and Android head unit:

  1. Head Unit Interface: Verify that your Android head unit has a 16-pin main interface and any specific extended interfaces as shown in Figure 5.
  2. Car Wire Harness Connectors: Compare your car's original radio and display screen module connectors with the images provided in Figure 6 to confirm compatibility with the harness.
16-pin Android Head Unit Interface Diagram
Figure 5: Diagram of a 16-pin Android head unit interface with pin definitions. Ensure your head unit matches these interfaces.
Suitable Car Wire Harness Connectors
Figure 6: Examples of original car radio and display screen module connectors (24-pin, 26-pin, 12-pin, 54-pin) compatible with the harness.

4.2. Connecting the Cable Adapter (Step 1)

Follow these steps to connect the main power wire harness:

  1. Connect Android Head Unit: Locate the 16-pin power plug on the wiring harness and plug it into the corresponding 16-pin power socket of your Android head unit.
  2. Connect UART Plug: Find the 8-pin UART plug of the wiring harness and plug it into the 8-pin UART socket of the Android head unit.
Connection of Cable Adapter
Figure 7: Visual guide for connecting the 16-pin power and 8-pin UART plugs to the Android head unit.

4.3. Connecting the CAN Bus Box

The CAN Bus Box is essential for translating vehicle signals. Connect it as follows:

  1. Locate the 16-pin and 20-pin CAN plugs on the power wire harness.
  2. Plug these connectors into the corresponding 16-pin and 20-pin sockets on the CAN Bus Box.
CAN Bus Box Connection
Figure 8: How to connect the 16-pin and 20-pin plugs from the power wire harness to the CAN Bus Box.

4.4. FM Antenna Harness Connection

Connect the FM Antenna Harness to your car's existing antenna cable and to the antenna input on your Android head unit.

4.5. USB Wire Harness Connection

Connect the USB Wire Harness to the USB port on your Android head unit and to the car's USB cable harness, if applicable.

5. Setup (CAN Bus Configuration on Android Head Unit)

After physical installation, you need to configure the CAN Bus settings on your Android head unit. The exact steps may vary slightly depending on your head unit's manufacturer and software version. Consult your head unit vendor if you encounter difficulties.

  1. Enter Settings: From the main screen of your Android head unit, navigate to the 'Settings' menu.
  2. Enter Factory Settings: Within the settings, look for an option like 'Factory Settings' or 'Car Settings'.
  3. Enter Factory Password: You may be prompted for a factory password. Common passwords include 3368, 1617, 8317, 8888. If these do not work, contact your Android radio seller for the correct password.
  4. Enter CAN Bus Settings: Once in the factory settings, find and select 'CAN bus settings' or 'CarType Settings'.
  5. Select CAN Bus Box Manufacturer: Choose 'Hiworld' as the CAN Bus Box manufacturer.
  6. Select Correct Car Model and Year: From the list, select your specific Ford car model and year (e.g., FORD_W01(2013-2017 EcoSport), FORD_W03(2013 Fiesta), FORD_W05(2015 Edge), etc.).
  7. Save and Reboot: Save your selections and reboot the Android head unit for changes to take effect.
Android Head Unit CAN Bus Setup Step 2
Figure 9: Screenshots illustrating the navigation to CAN Bus settings on an Android head unit.
Android Head Unit CAN Bus Setup Step 3
Figure 10: Screenshots showing the selection of CAN Bus Box manufacturer (Hiworld) and specific car model.

Video 1: Product overview and installation demonstration.

6. Operating

Once properly installed and configured, the FDC13 CAN Bus decoder will enable your Android head unit to receive and process various signals from your vehicle. This includes:

  • ACC Signal: Powers the head unit when the ignition is on.
  • Reverse Gear Signal: Activates the rearview camera display when the vehicle is in reverse.
  • Parking Signal: Provides parking status to the head unit.
  • Lights Signal: Adjusts head unit display brightness based on vehicle lights.
  • Steering Wheel Control (SWC) Signals: Allows you to control media playback, volume, and other functions directly from your steering wheel buttons.

The specific functions available will depend on your vehicle's original CAN Bus interface and the capabilities of your Android head unit.

7. Maintenance

The FDC13 wiring harness and CAN Bus decoder are designed for long-term, maintenance-free operation. To ensure optimal performance:

  • Avoid cutting or modifying any wires on the harness, as this can damage the product and void any support.
  • Ensure all connections are secure and free from moisture or excessive heat.
  • If you need to disconnect the head unit or harness, do so carefully to avoid damaging the connectors.

8. Troubleshooting

If you encounter issues after installation, consider the following:

  • No Power to Head Unit: Double-check all power connections, especially the 16-pin power plug to the Android head unit. Ensure the vehicle's ignition is on.
  • Steering Wheel Controls Not Working: Verify that the CAN Bus Box is correctly connected (16-pin and 20-pin plugs) and that the CAN Bus settings on your Android head unit are properly configured for 'Hiworld' and your specific car model.
  • Reverse Camera Not Activating: Check the reverse gear signal connection and ensure your head unit's settings for the reverse camera are correct.
  • Incorrect Factory Password: If the provided common passwords (3368, 1617, 8317, 8888) do not work, contact the vendor of your Android head unit for the correct factory password.
  • CAN Bus Box Inputs: The CAN Bus box typically uses two main inputs from the power harness: a 16-pin connector and a 20-pin connector. Ensure both are securely plugged in as shown in Figure 8.

9. User Tips

  • Head Unit Compatibility: This harness is compatible with 7, 8, 9, and 10-inch Android head units. Always confirm your head unit's main 16-pin interface matches the diagram provided (Figure 5).
  • Car Model Specificity: While compatible with many Ford models (Ranger, Focus, Edge, Kuga, Everest 2015+), car wiring can vary by region. Always visually confirm your car's original connectors match those shown in Figure 6 before purchase.
  • CAN Bus Box Selection: If you are purchasing a power harness separately and do not have a CAN Bus box, it is recommended to choose the 'FDC13' option which includes the CAN Bus box for full functionality.
  • Professional Installation: If you are unsure about any step of the installation process, it is advisable to seek assistance from a professional car audio installer.

10. Support

For any questions or further assistance regarding the Pinmany FDC13 Car Radio Cable and CAN Bus Decoder, please contact your seller or the manufacturer directly. Provide your product model (FDC13) and a detailed description of your issue for efficient support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.