TELESIN I500769211

Contents

TELESIN Underwater Selfie Stick Instruction Manual

Model: I500769211

1. Introduction

Thank you for choosing the TELESIN Underwater Selfie Stick. This device is designed to enhance your underwater photography and videography experience, offering robust waterproof capabilities and convenient wireless control for your GoPro Hero action cameras. Please read this manual thoroughly before use to ensure proper operation and to maximize the lifespan of your product.

2. Safety Information

  • Always ensure the charging port cover is securely closed before submerging the selfie stick in water.
  • Do not attempt to disassemble or modify the device, as this will void the warranty and may cause damage or injury.
  • Avoid exposing the device to extreme temperatures or direct sunlight for prolonged periods.
  • After use in saltwater, always rinse the selfie stick thoroughly with fresh water and allow it to dry completely.
  • Keep out of reach of children.

3. Package Contents

  • 1 x TELESIN Underwater Selfie Stick
  • 1 x Charging Cable (not explicitly listed but implied by charging feature)
  • 1 x Anti-slip Rope (wrist strap)

Note: A waterproof housing for your action camera is not included in this set but is recommended for diving depths exceeding 10 meters.

4. Product Overview

The TELESIN Underwater Selfie Stick features a robust design for both underwater and terrestrial use. It is constructed from durable aluminum alloy and plastic, ensuring stability and longevity. The stick incorporates a hydrophobic structure at its base to efficiently drain water and prevent rust. Its extendable shaft allows for versatile shooting angles, while the integrated wireless remote control provides easy access to camera functions.

Full view of the TELESIN Underwater Selfie Stick with a GoPro camera attached.
Figure 1: TELESIN Underwater Selfie Stick

Control Panel and Indicators

The selfie stick's handle features a control panel with buttons for operation and indicator lights to show the device's status.

Selfie stick control panel with indicator lights and a user shooting underwater.
Figure 2: Control Panel and Indicator Lights
  • Power Button: Used to turn the device on/off and initiate Bluetooth pairing.
  • Mode Button (M): Switches between different camera modes (e.g., photo, video).
  • Shutter/Record Button: Captures photos or starts/stops video recording.
  • Indicator Lights: Provide interactive feedback on recording status, battery level, and Bluetooth connection.

5. Specifications

FeatureSpecification
Product NameUnderwater Remote Selfie Stick
Model NumberI500769211
Waterproof RatingIPX68
Max Waterproof Depth30 meters (98 feet)
Compatible ModelsGoPro Hero 12, 11, 10, 9, 8
MaterialAluminum Alloy + Plastic
ColorGrey and Black
Folded LengthApproximately 7 inches
Extended LengthApproximately 33 inches (85 cm)

6. Setup

6.1 Attaching Your Action Camera

  1. Move the motion camera into position on the selfie stick's mount.
  2. Securely lock the camera to the selfie stick using the provided mounting mechanism. Ensure it is firmly attached to prevent accidental detachment, especially during underwater activities.
Step 1: Attaching the action camera to the selfie stick.
Figure 3: Attaching the Camera

6.2 Bluetooth Connection

  1. Turn on the Bluetooth connection on your GoPro Hero camera. Refer to your camera's manual for specific instructions on enabling Bluetooth pairing mode.
Step 2: Turning on Bluetooth on the action camera.
Figure 4: Enabling Camera Bluetooth
  1. Press and hold the power button on the selfie stick for 3 seconds. The selfie stick will automatically search for and connect to your camera's Bluetooth signal. The indicator lights will flash interactively to confirm the connection status.
Step 3: Initiating Bluetooth search on the selfie stick.
Figure 5: Bluetooth Pairing

7. Operating Instructions

7.1 Extending the Selfie Stick

To extend the selfie stick, simply pull the shaft outwards from the handle. It can extend from approximately 7 inches (folded) to a maximum of 33 inches (85 cm) to capture a wider field of view. To retract, push the shaft back into the handle.

7.2 Capturing Photos and Videos

  • Once connected via Bluetooth, use the Mode Button (M) to select your desired camera mode (e.g., photo, video).
  • Press the Shutter/Record Button to take a photo or to start/stop video recording. The indicator lights will provide visual feedback on the recording status.

7.3 Underwater Use

The selfie stick is IPX68 waterproof, allowing for use up to 30 meters (98 feet) deep in both freshwater and seawater. Ensure all port covers are sealed before submerging. The strong Bluetooth signal maintains a stable connection for reliable operation underwater.

8. Charging

The selfie stick supports contact charging for convenience. Connect the charging cable to the designated charging port on the device. A full charge takes approximately 1.5 hours.

Charging port and indicator lights on the selfie stick.
Figure 6: Charging Port

The indicator lights will show the charging status and battery level.

9. Maintenance

  • Cleaning: After each use, especially in saltwater, rinse the selfie stick thoroughly with fresh water to remove any salt, sand, or debris.
  • Drying: Allow the device to air dry completely before storing. Ensure no water remains in the charging port or around buttons.
  • Storage: Store the selfie stick in a cool, dry place away from direct sunlight and extreme temperatures.
  • Battery Care: For optimal battery life, avoid fully discharging the battery frequently. Charge the device regularly, even if not in use for extended periods.

10. Troubleshooting

  • Device not turning on: Ensure the battery is charged. Connect to a power source and attempt to turn on after a few minutes.
  • Bluetooth not connecting:
    • Ensure Bluetooth is enabled on your GoPro camera.
    • Make sure the selfie stick is in pairing mode (hold power button for 3 seconds).
    • Move the selfie stick closer to the camera.
    • Restart both the camera and the selfie stick and try pairing again.
  • Buttons not responding: Ensure the device is powered on and successfully connected via Bluetooth. Check for any physical obstructions or debris around the buttons.
  • Water ingress: Although the device is waterproof, if you suspect water has entered the internal components, immediately power off the device and contact customer support. Do not attempt to charge or use it.

11. User Tips

Based on available product information, here are some tips for optimal use:

  • Always perform a quick check of the charging port cover before any water activity to ensure it is fully sealed.
  • Utilize the anti-slip rope (wrist strap) to prevent accidental drops, especially in dynamic environments or underwater.
  • For extended underwater sessions or in challenging conditions, consider using a separate waterproof housing for your GoPro camera, particularly if diving deeper than 10 meters, even though the stick itself is rated for 30 meters.
  • Practice using the remote control buttons on land first to become familiar with their functions before using them underwater.

12. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the seller's official website or contact their customer service department. Keep your proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.