Cada C81053

Contents

Cada AWM Sniper Rifle Building Blocks Model

Model: C81053

1. Introduction

Thank you for choosing the Cada C81053 AWM Sniper Rifle Building Blocks Model. This set allows you to construct a detailed replica of a sniper rifle using 979 pieces of high-quality ABS plastic. Designed as a STEM educational toy, it offers an engaging building experience and features a functional firing mechanism for soft darts. This manual provides essential information for assembly, operation, maintenance, and safety.

Fully assembled Cada C81053 AWM Sniper Rifle building blocks model.
The fully assembled Cada C81053 AWM Sniper Rifle building blocks model, showcasing its detailed design.
Product information image showing the included 5 soft shells and the brand new disassembler tool.
Product information image showing the included 5 soft shells and the brand new disassembler tool.

2. Safety Warnings

  • Choking Hazard: This product contains small parts and is not suitable for children under 3 years old.
  • Projectile Warning: Do NOT point or shoot at people or animals. Always use soft darts provided and ensure a clear target area.
  • Ingestion Warning: Do not eat the building blocks.
  • California Proposition 65 Warning: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

3. Setup and Assembly

This model is a building block set. Please follow the detailed step-by-step instructions provided in the separate assembly manual included with your product. Ensure all 979 pieces are accounted for before beginning assembly.

3.1 Key Components Overview

Detailed diagram highlighting key components of the sniper rifle model.
Detailed diagram highlighting key components of the sniper rifle model: Scope, Barrel, Bolt, Buttstock, Bracket, Magazine, and Trigger.

3.2 Optical Sight Assembly

The model includes an optical sight for increased accuracy. This sight features an open sight cursor and a built-in button battery. Fine-tune the front sight as needed during assembly or operation.

Close-up view of the optical sight, showing the open sight cursor, built-in button battery, and fine-tuning front sight.
Close-up view of the optical sight, showing the open sight cursor, built-in button battery, and fine-tuning front sight.

3.3 Attaching the Adjustable Strap

An adjustable strap is provided for carrying the model. To attach it, align the strap's connectors with the designated holes on the rifle body and secure them.

Instructions for attaching the adjustable strap to the rifle model by aligning the holes.
Instructions for attaching the adjustable strap to the rifle model by aligning the holes.

3.4 Using the Multi-functional Separator Tool

A multi-functional separator tool is included to assist with assembly and disassembly. It can be used as a pin puller, bush puller, tile remover, normal pin puller, and axle pusher, making it easier to connect or separate blocks.

Diagram of the multi-functional separator tool, identifying its parts.
Diagram of the multi-functional separator tool, identifying its parts: Pin puller, Bush puller, Tile remover, Normal pin puller, and Axle pusher.

4. Operating Instructions

The Cada AWM Sniper Rifle model features a functional firing mechanism for soft darts. Always ensure safe handling and follow the safety warnings.

4.1 Loading and Firing Soft Darts

  1. Remove Magazine: Detach the magazine from the rifle.
  2. Load Darts: Place the soft darts into the magazine. The product comes with 5 soft shells.
  3. Insert Magazine: Re-insert the loaded magazine into the rifle.
  4. Pull Bolt: Pull the bolt mechanism back to load a dart into the firing chamber.
  5. Aim: Use the optical sight to aim at your target. Remember the warning: Do NOT point or shoot at people or animals.
  6. Pull Trigger: Gently pull the trigger to fire the soft dart.
Step-by-step guide for operating the dart firing mechanism.
Step-by-step guide for operating the dart firing mechanism: Removing the magazine, pulling the bolt to load a dart, storing soft darts, and pulling the trigger.
Image demonstrating the functional trigger and soft dart firing, with a warning not to point or shoot at people or animals.
Image demonstrating the functional trigger and soft dart firing, with a warning not to point or shoot at people or animals.

4.2 Product Demonstration Video

Product demonstration video showcasing assembly, features, and firing mechanism of the Cada AWM Sniper Rifle building blocks model.

5. Maintenance

  • Cleaning: Wipe the model with a soft, dry cloth to remove dust. For stubborn dirt, use a slightly damp cloth and dry immediately. Avoid harsh chemicals or abrasive cleaners.
  • Storage: Store the model in a cool, dry place away from direct sunlight and extreme temperatures to prevent material degradation.
  • Handling: Handle the model with care to avoid accidental disassembly or damage to delicate parts.

6. Troubleshooting

  • Missing Pieces: If you find any missing pieces during assembly, please contact customer support for assistance.
  • Difficulty Connecting Blocks: Ensure blocks are correctly oriented and apply gentle, even pressure. The multi-functional separator tool can help if blocks are too tight or need to be removed.
  • Darts Not Firing: Check that the magazine is properly inserted, darts are loaded correctly, and the bolt is fully pulled back before attempting to fire.
  • Loose Connections: Re-examine the assembly steps for any loose connections. Disassemble and reassemble the affected section if necessary.

7. Specifications

FeatureDetail
Model NumberC81053
Number of Pieces979 PCS
MaterialABS Plastic
Block ShapeSelf-Locking Bricks (Compatible with Lego)
Dimensions (Approx.)Length: 112.8 cm, Height: 24.6 cm
Recommended Age14+ years, 18+ years
Is ElectricNo Battery
CertificationCE
OriginMainland China

8. User Tips

  • Patience is Key: Building complex models requires patience. Take your time with each step to ensure correct assembly.
  • Organize Pieces: Before starting, sort the building blocks by color or type to make the assembly process smoother.
  • Packaging: Please note that this product is typically shipped without a retail box to reduce shipping costs and environmental impact. All pieces are securely packaged.

9. Warranty and Support

For any questions, concerns, or issues regarding your Cada C81053 AWM Sniper Rifle Building Blocks Model, please contact the seller or manufacturer directly. Provide your purchase details and model number for efficient support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.