Introduction
Thank you for choosing the Aigostar 10m Outdoor Solar LED Strip. This product is designed to provide versatile and energy-efficient lighting for your outdoor spaces, powered entirely by solar energy. With its remote control, multiple lighting modes, and robust IP65 waterproof rating, it's perfect for enhancing gardens, patios, paths, and more. Please read this manual carefully before installation and use to ensure optimal performance and safety.
Safety Information
- Ensure the solar panel is placed in a location that receives direct sunlight for maximum charging efficiency.
- Do not attempt to open or modify the solar panel or LED strip, as this may damage the product and void the warranty.
- Keep the product away from open flames or extreme heat sources.
- The LED strip operates at a safe low voltage (5V) and is touch-safe.
- Children should be supervised when near the product.
- Dispose of the product and its components responsibly according to local regulations.
Package Contents
Please check that all items are present in your package:
- 1 x 10m Solar LED Strip (300 RGB LEDs)
- 1 x Solar Panel with integrated battery
- 1 x Remote Control
- 1 x Installation Kit (including ground stake and wall mounting accessories)

Setup Instructions
- Initial Charge: Before first use, ensure the solar panel is exposed to direct sunlight for at least 6-8 hours to fully charge the internal battery.
- Solar Panel Placement: Choose a location for the solar panel that receives maximum direct sunlight throughout the day. Avoid shaded areas. The installation kit provides options for:

Image: Solar Panel Installation Options - Ground stake and wall mount methods. - Ground Stake: Attach the stake to the solar panel and firmly insert it into soft ground. Adjust the angle for optimal sun exposure.
- Wall Mount: Use the provided screws and anchors to securely mount the solar panel on a wall or fence. Adjust the angle as needed.
- LED Strip Installation: Unroll the LED strip carefully. The strip is flexible and can be shaped to fit your desired decorative or lighting path. Ensure the connection cable from the LED strip reaches the solar panel.
- Connect the LED Strip: Plug the connector from the LED strip into the corresponding port on the solar panel. Ensure a secure connection.

Operating Instructions
The Aigostar Solar LED Strip features a smart light control mode and can also be operated using the included remote control. Ensure the remote control is pointed towards the solar panel for effective communication.

Smart Light Control Mode:
By default, the LED strip operates in smart light control mode:
- It charges during the day when the solar panel detects sunlight.
- It automatically turns on at night when ambient light levels drop.
To disable this function, press and hold the 'OFF' button on the remote control. To restore it, press the 'ON' button.
Remote Control Functions:
Point the remote control directly at the solar panel to control the lights.
- ON/OFF: Press the red 'ON' button to turn the lights on, and the black 'OFF' button to turn them off.
- Mode Selection: Cycle through 3 lighting modes:
- Breathing (gradual color fade)
- Color Changing (dynamic transitions)
- Steady On (static color)
- Color Selection: Choose from 7 static colors: Red, Green, Blue, Yellow, Purple, Cyan, White.
- Brightness Adjustment: Select between 2 brightness levels: 40% and 100%.
- Timer Options: Set the lights to turn off automatically after a specified duration:
- 3H: Lights will stay on for 3 hours.
- 6H: Lights will stay on for 6 hours.

Maintenance
- Solar Panel Cleaning: Regularly wipe the solar panel with a soft, damp cloth to remove dust, dirt, or debris. A clean panel ensures maximum charging efficiency.
- LED Strip Cleaning: The IP65 waterproof rating means the strip is protected against dust and water jets. For cleaning, gently wipe the silicone cover with a damp cloth. Do not use harsh chemicals or abrasive materials.
- Connection Check: Periodically inspect the connection between the LED strip and the solar panel to ensure it is secure and free from corrosion.
- Winter Care: In areas with heavy snow or prolonged periods of low sunlight, consider cleaning snow off the solar panel or temporarily storing the unit indoors to prolong battery life.

Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lights do not turn on at night. | Insufficient solar charge; Smart light control disabled; Faulty connection. | Ensure solar panel receives direct sunlight for 6-8 hours. Press 'ON' on remote to re-enable smart control. Check all cable connections. |
| Remote control is not working. | Remote battery low/dead; Obstruction; Not pointed at solar panel. | Replace remote battery. Ensure clear line of sight to solar panel. Point remote directly at the solar panel. |
| Lights stay on for a short period. | Insufficient solar charge; Timer function activated. | Ensure solar panel receives full sunlight. Check if a timer (3H/6H) is set on the remote. |
| Lights are dim. | Insufficient charge; Solar panel dirty; Brightness set to 40%. | Allow for full charge. Clean solar panel. Set brightness to 100% using the remote. |
Specifications
| Feature | Specification |
|---|---|
| Length | 10 meters |
| LED Type | 300 x 5050 RGB LEDs |
| Wattage | 100W |
| Luminous Flux | 1000lm |
| Power Source | Solar |
| Solar Panel Voltage | 5V |
| Battery Capacity | 2000 mAh |
| Charging Time | Approx. 4-6 hours (direct sunlight) |
| Runtime | Up to 14 hours (on full charge) |
| Protection Level | IP65 Waterproof |
| Body Material | ABS, Silicone Protective Cover |
| Lighting Modes | Breathing, Color Changing, Steady On |
| Colors | Red, Green, Blue, Yellow, Purple, Cyan, White |
| Brightness Levels | 40%, 100% |
| Timer Options | 3 hours, 6 hours |
| Installation Method | Assembly (Ground Stake / Wall Mount) |
| Certification | CE |

User Tips
- For best performance, ensure the solar panel is cleaned regularly to remove any dust or debris that might obstruct sunlight absorption.
- Position the solar panel facing south (in the Northern Hemisphere) or north (in the Southern Hemisphere) for maximum sun exposure throughout the day.
- If the lights are not as bright as expected, check the brightness setting on the remote control and ensure the solar panel has had sufficient charging time.
- Consider using the timer function to conserve battery life, especially during shorter winter days.
Warranty and Support
Aigostar products are manufactured to high-quality standards. For any issues or support needs, please refer to your purchase documentation or contact the seller directly. Keep your proof of purchase for warranty claims.