1. Introduction
Thank you for choosing the P62 TURBO RACING 4-Channel LCD 2.4G Remote Control. This advanced remote control system is designed for precise and reliable operation of various RC models, including cars and marine vehicles. Featuring a clear LCD display, multiple programmable functions, and a robust 2.4GHz digital proportional system, the P62 offers an enhanced control experience. This manual provides essential information for proper setup, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.
2. Safety Information
- Always operate your RC model in a safe and open area, away from people, pets, and obstacles.
- Ensure all batteries are fully charged and correctly installed before operation.
- Never operate your RC model near water unless it is specifically designed to be waterproof.
- Keep the remote control and receiver away from extreme temperatures, moisture, and direct sunlight.
- Do not attempt to modify or disassemble the remote control or receiver, as this may void the warranty and cause malfunction.
- Children should only operate RC models under direct adult supervision.
3. Package Contents
The standard package includes the following items:
- P62 4-Channel LCD 2.4G Remote Control
- RX41 4-Channel Waterproof Receiver
4. Product Overview
Familiarize yourself with the components of your P62 remote control and RX41 receiver.
4.1 P62 Remote Control Components
- LCD Display: Shows current settings and telemetry data.
- Steering Wheel: Controls the steering of your model.
- Throttle Trigger: Controls forward/reverse and speed.
- Trim Buttons (ST+, ST-, TH+, TH-): Adjust steering and throttle neutral positions.
- Channel Buttons (CH, SEL): For selecting channels and menu navigation.
- Power Switch: Turns the remote control ON/OFF.
- Battery Compartment: Holds 4x AA batteries.
4.2 RX41 Receiver
- 4 Channels: Supports up to four control functions.
- Waterproof: Designed to withstand splashes and wet conditions.
- Binding Button (SW): Used for pairing with the remote control.
- LED Indicator: Shows power and binding status.
5. Setup
5.1 Installing Batteries in the Remote Control
- Open the battery compartment cover on the bottom of the P62 remote control.
- Insert four (4) AA batteries, ensuring correct polarity (+/-).
- Close the battery compartment cover securely.
5.2 Connecting the Receiver to Your Model
- Connect the receiver to your model's Electronic Speed Controller (ESC), steering servo, and any other accessories according to your model's instructions. Ensure correct port connections (e.g., CH1 for steering, CH2 for throttle).
- Mount the receiver securely in your model, ensuring the antenna is positioned for optimal signal reception and away from metal parts.
5.3 Binding the Remote Control and Receiver
Binding establishes a secure communication link between your P62 remote control and the RX41 receiver.
- Ensure the remote control is OFF.
- Power on your RC model, which will supply power to the receiver. The receiver's LED should flash, indicating it's in binding mode.
- Press and hold the binding button (SW) on the RX41 receiver.
- While holding the binding button, turn ON the P62 remote control.
- Release the binding button on the receiver once the LED on the receiver turns solid, indicating a successful bind.
- Test the controls to ensure proper functionality before operating your model.
6. Operating Instructions
6.1 Basic Control
- Steering: Rotate the steering wheel left or right to control the direction of your model.
- Throttle: Pull the throttle trigger towards you for forward movement and push it away for reverse/brake.
6.2 LCD Display and Functions
The LCD display provides real-time information and allows for various adjustments:
- Trim Adjustments (ST/TH Trim): Use the ST+ / ST- buttons to fine-tune steering trim and TH+ / TH- buttons for throttle trim. This helps ensure your model tracks straight and stops at neutral.
- Channel Selection (CH): Use the CH button to cycle through available channels for specific functions if your model supports them.
- Model Memory: The P62 supports storing settings for up to 15 different models, allowing quick switching between your RC vehicles.
- D/R (Dual Rate): Adjusts the maximum steering or throttle throw.
- REV (Reverse): Reverses the direction of a channel (e.g., steering or throttle).
- EPA (End Point Adjustment): Sets the maximum travel for each servo.
- ABS (Anti-lock Braking System): Provides pulsed braking for improved control.
- EXP (Exponential): Adjusts the sensitivity of controls around the center point.
- SVC Gyroscope: Provides stability assistance for improved handling.
6.3 Special Features
- F/S (Fail-Safe) Function: In case of accidental disconnection or signal loss, the fail-safe function will automatically bring the controlled model to a balanced stop, preventing loss of control.
- Low Voltage Alarm: The remote control will emit an audible alarm when the battery voltage drops below 4.5V, indicating it's time to replace the AA batteries.
- Long Control Distance: Enjoy a reliable control range of up to 120 meters.
7. Maintenance
- Cleaning: Use a soft, dry cloth to clean the remote control and receiver. Avoid using solvents or harsh chemicals.
- Storage: Store the remote control and receiver in a cool, dry place away from direct sunlight and extreme temperatures. Remove batteries from the remote control if storing for extended periods to prevent leakage.
- Battery Care: Always use fresh, high-quality AA batteries for the remote control. Replace them promptly when the low voltage alarm sounds.
- Receiver Protection: Although the RX41 receiver is waterproof, avoid prolonged submersion or exposure to corrosive liquids. Ensure all connections are secure.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote control does not power on. | Dead or incorrectly installed batteries. | Replace with fresh AA batteries, ensuring correct polarity. |
| Model does not respond to controls. | Not bound, receiver not powered, or incorrect connections. | Re-bind the remote and receiver. Check all wiring connections to the receiver and ESC. Ensure model battery is charged. |
| Erratic control or short range. | Interference, loose antenna, or low remote control battery. | Operate in an open area. Check receiver antenna placement. Replace remote control batteries. |
| Low voltage alarm sounds frequently. | Remote control batteries are low. | Replace all four AA batteries immediately. |
9. Specifications
9.1 P62 Remote Control
| Feature | Specification |
|---|---|
| Model Number | P62 |
| Frequency | 2.4GHz |
| Channels | 4 |
| Control Distance | Up to 120 meters |
| Battery Type | 4x AA batteries (not included) |
| Low Voltage Alarm | Below 4.5V |
| Applicable Models | RC Cars, RC Marine Models |
| Dimensions (L x W x H) | 220.1mm x 115.2mm x 178.8mm |
| Material | Composite Material |
9.2 RX41 Receiver
| Feature | Specification |
|---|---|
| Model Number | RX41 |
| Channels | 4 |
| Input Voltage | 4.8V-10V |
| Waterproof | Yes |
| Dimensions (L x W x H) | 34.09mm x 18.11mm x 13.60mm |
10. User Tips
- For optimal range and signal stability, ensure the receiver antenna is not coiled or obstructed by carbon fiber or metal parts in your model.
- Experiment with the D/R and EXP settings to customize the control feel to your preference and driving style.
- Utilize the 15-model memory feature if you have multiple RC vehicles to avoid re-binding and re-configuring settings each time.
- Always perform a range check before operating your model at full distance, especially in new environments.
11. Warranty and Support
For warranty information, technical support, or service inquiries, please contact your original retailer or the manufacturer directly. Keep your proof of purchase for any warranty claims.