JIKONG JK-B2A8S

Contents

JIKONG JK-B2A8S Smart Active Balancer User Manual

Model: JK-B2A8S | Brand: JIKONG

1. Introduction

The JIKONG JK-B2A8S is a Smart Active Balancer designed for various battery chemistries, including Li-ion, LiFePO4, and LTO batteries. This device provides real-time, active energy transfer equalization to optimize battery performance and extend lifespan. It supports battery packs from 4S to 8S and features Bluetooth connectivity for monitoring and control via a mobile application.

JIKONG JK-B2A8S Smart Active Balancer front view
Figure 1: JIKONG JK-B2A8S Smart Active Balancer

2. Key Features

  • Real-time Active Balancing: Provides continuous energy transfer equalization for optimal cell voltage consistency.
  • Wide Battery Compatibility: Supports Li-ion, LiPo, LiFePO4, LTO, and super capacitor battery types.
  • Flexible Cell Configuration: Compatible with battery packs from 4S to 8S.
  • High Precision Voltage Collection: Single cell voltage collection range of 1V ~ 5V with an accuracy of ± 3mV.
  • Adjustable Balance Current: Features an active balance current of 2A.
  • Bluetooth Connectivity & APP Control: Monitor battery status in real-time via a mobile application (iOS/Android/HarmonyOS).
  • Advanced Diagnostics: Includes equilibrium line resistance detection to identify abnormal contact failures.
  • Battery Protection: Incorporates a low voltage shutdown function to prevent battery damage.
  • Durable Construction: Features a metal shell and high-quality components for reliable performance.
Diagram illustrating Intelligent Active Balancing Technology with a battery pack
Figure 2: Intelligent Active Balancing Technology
Exploded view of the JIKONG balancer showing internal components like PCBA, MCU, and capacitors
Figure 3: High-Quality Components and Construction

3. Specifications

AttributeValue
Brand NameJIKONG
ModelJK-B2A8S
TypeActive Balanced BMS (Balancer)
Battery Strings Supported4S-8S (Li-ion, LiFePO4, LTO)
Balance MethodActive Balance (Full State On)
Balance Current2A
Single Cell Voltage Range1V ~ 5V
Voltage Accuracy± 3mV
Bluetooth FunctionYES
APP SupportAndroid, iOS, HarmonyOS
RS485 FunctionNO
CANBUS FunctionNO
NTC (Temperature Detection)NO
Charging Current (General BMS)10A (Note: This refers to general BMS capability, not balancer current)
Function (General BMS)Overcharge Protection, Over Discharge Protection, Overcurrent Protection, Short Circuit Protection
CertificationCE, FCC
Usage ScenarioPower BMS, Energy Storage BMS, 3C Digital BMS
Dimensions (Approx.)Length: 85mm, Width: 115mm, Height: 20mm (for JK-B2A8S)
Package Weight (Approx.)0.4 kg
Table showing JIKONG Product Specifications for various models including JK-B2A8S
Figure 4: JIKONG Product Specifications Overview

4. Safety Information

Always observe the following safety precautions when installing and operating the JIKONG JK-B2A8S Smart Active Balancer:

  • Ensure all connections are correct and secure before applying power. Incorrect wiring can cause damage to the balancer, battery, or connected equipment.
  • Work in a dry environment and avoid contact with water or other liquids.
  • Do not attempt to open or modify the balancer. Refer servicing to qualified personnel.
  • Always disconnect the battery pack before performing any wiring or maintenance.
  • Verify battery voltage and polarity before connecting the balancer.
  • Keep out of reach of children.

5. Setup & Installation

Follow these steps for proper installation of your JIKONG JK-B2A8S Smart Active Balancer:

  1. Prepare the Battery Pack: Ensure your battery pack is within the supported 4S-8S configuration and is disconnected from any loads or chargers.
  2. Connect Balance Cables: Carefully connect all individual cell voltage sensing wires (balance cables) from your battery pack to the corresponding balance cable connector on the balancer. Ensure correct polarity and sequence (B0, B1, B2... up to B8).
  3. Insert Cable into Balancer: Insert the main balance cable connector firmly into the designated port on the active equalizer (balancer).
  4. Connect B-line and P-line: Connect the main negative (B-) line and the main positive (P+) line from your battery pack to the balancer, if applicable and as shown in the wiring diagram. For the JK-B2A8S, the diagram primarily shows the balance wire connections.

Important: Refer to the specific wiring diagram for your JK-B2A8S model to ensure correct connections. Incorrect wiring can lead to damage.

Wiring diagram for JIKONG JK-B2A8S active equalizer
Figure 5: Installation and Wiring Diagram for JK-B2A8S

6. Operating Instructions

The JIKONG JK-B2A8S Smart Active Balancer operates automatically to equalize cell voltages. For monitoring and advanced control, use the dedicated mobile application.

6.1 Mobile APP Connection and Monitoring

  1. Download the APP: Search for "JIKONG BMS" or similar in your device's app store (Android, iOS, HarmonyOS).
  2. Enable Bluetooth: Ensure Bluetooth is enabled on your mobile device.
  3. Connect to Balancer: Open the JIKONG APP and search for available devices. Select your JK-B2A8S balancer to connect.
  4. Monitor Battery Status: The APP provides real-time data on various battery parameters, including:
    • Voltage (Overall and individual cell voltages)
    • Current
    • Temperature (if external NTC is used with a compatible BMS, though this balancer model does not have NTC)
    • State of Charge (SOC)
    • Alarms/Warnings
    • Cycle Count
    • Cell Wire Resistance (for detecting abnormal contact)

The APP supports multiple languages and can automatically switch based on your phone's system settings.

Screenshot of the JIKONG mobile APP interface showing battery parameters
Figure 6: Mobile APP Interface for Battery Monitoring
Diagram showing mobile app and PC software options for data connection
Figure 7: Multi-screen Display and Data Connection Options

6.2 Parameter Adjustment (if applicable)

While the JK-B2A8S primarily focuses on active balancing, the APP may allow adjustment of certain balancing parameters. If you need to adjust protection values (e.g., overcharge, overdischarge, overcurrent, temperature), these are typically managed by a separate Battery Management System (BMS) that the balancer might integrate with. Always consult the documentation for your full BMS setup before making changes.

Notice: If you require PC connectivity for advanced configuration or monitoring, you will need to purchase a balancer model with RS485 or CANBUS functions, as the JK-B2A8S does not include these.

7. Maintenance

  • Regular Inspection: Periodically check all wiring connections for tightness and signs of corrosion or damage.
  • Keep Clean: Ensure the balancer unit is free from dust, dirt, and moisture. Use a soft, dry cloth for cleaning.
  • Firmware Updates: Check the JIKONG official website or APP for any available firmware updates to ensure optimal performance and access to new features.
  • Environmental Conditions: Operate the balancer within its specified temperature and humidity ranges to prevent damage.

8. Troubleshooting

ProblemPossible CauseSolution
Balancer not powering on/no activityIncorrect wiring, loose connections, battery voltage too low.Verify all balance wire connections and main power lines. Check battery voltage to ensure it's within the operating range. Re-seat connectors.
APP cannot connect via BluetoothBluetooth disabled on phone, balancer out of range, interference, APP issue.Ensure phone Bluetooth is on. Move closer to the balancer. Restart the APP and/or phone. Check if other Bluetooth devices are causing interference.
Cells not balancing effectivelyHigh cell voltage difference, faulty balance wire, balancer malfunction.Allow sufficient time for balancing, especially with large differences. Check individual balance wire resistance via the APP (if available) or manually. Contact support if issue persists.
"Abnormal contact failure" detectedLoose or corroded balance wire connection.Inspect the specific balance wire indicated by the APP. Clean and re-secure the connection.

9. User Tips

  • Initial Balance: For new battery packs or packs with significant cell voltage differences, allow the balancer ample time to perform its initial equalization. This can take several hours or even days depending on the capacity and imbalance.
  • Regular Monitoring: Utilize the JIKONG APP regularly to monitor cell voltages and overall battery health. This helps in early detection of potential issues.
  • Proper Ventilation: Ensure the balancer is installed in a location with adequate ventilation to dissipate any heat generated during operation, especially during high balancing currents.
  • Cable Management: Keep balance cables tidy and secured to prevent accidental disconnections or damage.

10. Warranty & Support

For warranty information, technical support, or service inquiries, please contact the JIKONG Official Store or your authorized dealer. Keep your purchase receipt as proof of purchase.

JIKONG Official Store contact information can typically be found on the platform where the product was purchased or on the manufacturer's official website.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.