Mestek EMF02R

Contents

Mestek EMF02R Digital Electromagnetic Radiation Meter User Manual

Model: EMF02R | Brand: Mestek

1. Introduction

The Mestek EMF02R is a versatile digital electromagnetic radiation meter designed for detecting various types of radiation, including high-frequency (RF), electric field (E-field), and magnetic field (H-field) radiation. This device is equipped with a high-definition VA reverse display color screen, providing clear digital and analog readings. It is suitable for use in a wide range of environments, from households and offices to industrial settings and signal base stations, helping users identify and mitigate potential radiation sources.

Mestek EMF02R Digital Electromagnetic Radiation Meter front view

Figure 1: Mestek EMF02R Digital Electromagnetic Radiation Meter front view

2. Product Overview

2.1 Components and Dimensions

Mestek EMF02R Digital Electromagnetic Radiation Meter with labeled parts and dimensions

Figure 2: Labeled components and dimensions of the EMF02R meter

  • Induction Probe: Detects electromagnetic fields.
  • Display Screen: VA reverse display color screen for readings.
  • Function Keys: Control various operations and modes.
  • Charging Indicator Light: Indicates charging status.
  • Type-C Charging Port: For charging the device.

The meter measures approximately 204mm in height, 63mm in width, and 32mm in thickness.

2.2 Display Screen

Close-up of the VA reverse display color screen of the Mestek EMF02R meter

Figure 3: VA reverse display color screen detail

The VA reverse display color screen offers a high-definition digital and analog dual display, ensuring clear visibility of measurement data, battery status, and other indicators.

3. Setup

3.1 Initial Charging

Before first use, ensure the device is fully charged. Connect the provided USB Type-C charging cable to the Type-C charging port on the bottom of the device and to a suitable USB power source. The charging indicator light will show the charging status. The device uses an 18650/2000mA battery.

3.2 Power On/Off

Press the Power button (symbol: ⏻) to turn the device on or off.

4. Operation

4.1 Key Functions

Key functions and featured capabilities of the Mestek EMF02R meter

Figure 4: Control buttons and their functions

SymbolDescription
⏻Power button
SELFunction conversion key (switches between E-field and H-field)
AVG/MAXAverage and maximum value conversion keys
HOLDData lock key (freezes current reading)
🔔Ring tone on/off key (buzzer switch)
RFHigh frequency signal conversion key (enters RF measurement mode)

4.2 Measurement Modes

Detailed explanation of RF, E-field, and H-field measurement modes

Figure 5: Measurement modes and their applications

  • RF (High Frequency) Mode:

    Short press the RF button to enter high-frequency signal radiation measurement mode. The screen will display "RF". This mode can measure radiation from base stations between 30MHz and 8GHz.

  • E-field (Electric Field) Mode:

    Short press the SEL key to display "E-field" on the screen. This mode measures the electric field radiation value of electrical equipment.

  • H-field (Magnetic Field) Mode:

    Short press the SEL key again (after E-field) to display "H-field" on the screen. This mode measures the electromagnetic radiation values of electrical equipment. You can press the SEL button to convert between mG (milliGauss) and uT (micro Tesla) units.

4.3 Understanding the Display

Screen display symbols and radiation area comparison table for Mestek EMF02R

Figure 6: Display symbols and radiation level interpretation

SymbolDescriptionUnitDescription
🔋Battery IndicatoruTMicro Teslas
⏻Automatic shutdownmGMilliGauss
▬Simulated displayV/mVolts per meter
AVGAverage valueuW/cm²Microwatt/square centimeter
MAXMaximum value°CCelsius
HOLDData locking°FFahrenheit degree
RFRadio frequency%Percentage (Humidity)
H-fieldMagnetic field🔔Ringtones
E-fieldElectric field

Radiation Area Comparison Table

The simulated display bar indicates radiation levels. If the bar reaches the yellow area, it suggests excessive radiation, and protective measures should be considered or distance from the source increased.

Analog DisplayGreen (Safe)Yellow (Caution)Red (Danger)
uW/cm²0.0-39.940-99.9100-9999
V/m0-3940-399400-999
mG0.0-3.94.0-39.940.0-199.9
uT0.00-0.390.40-3.994.00-19.99

5. Maintenance

5.1 General Care

Keep the device clean and dry. Avoid exposing it to extreme temperatures, humidity, or direct sunlight. Use a soft, dry cloth for cleaning. Do not use abrasive cleaners or solvents.

5.2 Battery Care

Recharge the device when the low battery warning appears on the screen. For long-term storage, ensure the battery is partially charged (around 50%) and store in a cool, dry place. Avoid fully discharging the battery for extended periods.

6. Troubleshooting

  • Device does not power on: Ensure the battery is charged. Connect to a power source using the Type-C cable and try again.
  • Inaccurate readings: Ensure the device is held steadily and away from strong interference sources.
  • Screen is blank or frozen: Try restarting the device by holding the power button. If the issue persists, contact customer support.

7. Specifications

FeatureValue
Product NameEMF02R
Brand NameMestek
DIY SuppliesElectrical
OriginMainland China (Guangdong)
CertificationCE
PowerElectronic
TypeElectromagnetic Radiation Meter
ApplicationElectromagnetic Radiation Meter
Size204*63*32mm
Weightabout 220g
Working Height2000m
Temperature Range0-50℃
Automatic Shutdownabout 15 minutes
Test Bandwidth30MHz~8GHz
Sampling Rateabout 0.4 seconds
Display ScreenVA reverse display color screen

8. User Tips

  • For accurate readings, ensure the meter is held steady and away from your body during measurements.
  • When measuring different types of radiation (RF, E-field, H-field), remember to switch to the appropriate mode using the SEL and RF buttons.
  • Pay attention to the simulated display bar; if it enters the yellow or red zone, consider increasing your distance from the radiation source or taking protective measures.

9. Warranty and Support

9.1 Warranty Information

This product comes with a 1-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims.

9.2 Customer Support

For any technical assistance, troubleshooting, or warranty inquiries, please contact Mestek Electronics Co.,LTD. They offer 7*24 after-sales service to help resolve any issues you may encounter.

Refer to the seller's contact details or the official product website for specific support contact information.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.