ANDELI MIG-250

Contents

ANDELI MIG-250 LED Multi-Process Welding Machine

User Manual

1. Product Overview

The ANDELI MIG-250 is a versatile multi-process welding machine designed for MIG (Gasless Flux), MMA (Stick), and LIFT TIG welding. It features an LED display screen with an MCU intelligent chip for easy operation and precise control. This machine is suitable for various applications, including machinery repair shops, and can weld materials such as carbon steel, galvanized pipe, and stainless steel.

ANDELI MIG-250 Welding Machine with accessories
Figure 1: ANDELI MIG-250 Welding Machine with included accessories.

2. Safety Information

Always read and understand all safety precautions before operating the welding machine. Failure to follow safety guidelines can result in serious injury or death. Wear appropriate personal protective equipment (PPE) including welding helmet, gloves, and protective clothing. Ensure proper ventilation in the work area.

  • Always disconnect power before performing any maintenance or adjustments.
  • Do not operate the machine in wet conditions.
  • Ensure the work area is free from flammable materials.
  • Use only approved accessories and consumables.

3. Setup

3.1 Component Identification

Front panel of MIG-250 with labeled controls
Figure 2: Front Panel Controls and Connections

The front panel includes:

  • Select Button: Used to cycle through welding modes (MIG, MMA, LIFT TIG) and parameter adjustment options.
  • Knob: Used to adjust welding parameters (current, voltage, wire speed).
  • Function Area: Displays selected welding mode and parameters.
  • Torch Interface: Connection point for the welding torch.
  • Positive Pole (+): Connection for the positive cable.
  • Negative Pole (-): Connection for the negative cable.
  • Two-core Plug: For specific accessory connections.
Rear panel of MIG-250 with ON/OFF switch and power cable connection
Figure 3: Rear Panel Connections

The rear panel includes:

  • ON/OFF Switch: Main power switch for the machine.
  • Power Cable: Connects the machine to a 220V power supply.

3.2 Power Connection

  1. Ensure the ON/OFF switch on the rear panel is in the 'OFF' position.
  2. Connect the power cable to a suitable 220V AC power outlet.

3.3 Welding Cable and Torch Connection

  1. Connect the welding torch to the Torch Interface on the front panel.
  2. Connect the ground clamp cable to the appropriate pole (Positive or Negative) depending on the welding process and polarity requirements.
  3. For MMA welding, connect the electrode holder cable to the remaining pole.

3.4 Flux Wire Installation (for MIG Gasless Welding)

Internal view showing flux wire spool and feed mechanism
Figure 4: Flux Wire Installation

The MIG-250 supports gasless flux core wire of 0.8mm and 1.0mm diameter. To install:

  1. Open the wire feed compartment.
  2. Place the flux wire spool onto the spindle.
  3. Thread the wire through the wire feed mechanism, ensuring it passes through the correct groove for the wire diameter (0.8mm or 1.0mm).
  4. Close the compartment.

4. Operating Instructions

4.1 Power On

Flip the ON/OFF switch on the rear panel to the 'ON' position. The LED display will illuminate.

4.2 Mode Selection and Parameter Adjustment

Video 1: Demonstration of control panel operation, including mode selection and parameter adjustment.

The MIG-250 features an intuitive LED display and a single knob for adjustments:

  1. Select Welding Mode: Press the 'Select Button' (red button on the front panel) to cycle through the available welding modes: MIG (Flux), MMA, and LIFT TIG. The selected mode will be indicated on the display.
  2. Adjust Parameters: Once a mode is selected, rotate the 'Knob' to adjust the corresponding welding parameters (e.g., current, voltage, wire speed). The display will show the current settings.

4.3 Synergy Function

Close-up of the control panel highlighting the Synergy Knob
Figure 5: Synergy Knob for Automatic Parameter Matching

The machine features a Synergy function for simplified operation. By adjusting a single knob, the machine automatically matches the current, voltage, and wire speed based on the thickness of the welding plate. This allows for easy and efficient welding.

4.4 Welding Modes Overview

Diagram showing welding applications for 1.0 MIG, 0.8 MIG, MMA, and LIFT TIG
Figure 6: Welding Applications by Mode
  • MIG (Flux): Ideal for welding iron plates (1.0mm wire) and galvanized pipes (0.8mm wire). No external gas cylinder is required, making it convenient and efficient.
  • MMA (Manual Metal Arc): Suitable for welding with 2.5 electrodes. The machine supports MMA welding for thicknesses up to 5mm.
  • Image of a person performing MMA welding
    Figure 7: MMA Welding (Thickness ≤5MM)
  • LIFT TIG: Features a Lift-Arc Ignition. To start the arc, the tungsten electrode is touched on the job and then lifted off. Welding is not controlled by the torch switch to start the arc. Suitable for stainless steel.
  • Image of a person performing LIFT TIG welding
    Figure 8: LIFT TIG Welding

5. Maintenance

Regular maintenance ensures the longevity and optimal performance of your welding machine.

  • Cleaning: Periodically clean the machine's exterior and ventilation openings to prevent dust and debris buildup. Use compressed air to clear internal components if necessary, ensuring the machine is unplugged.
  • Cable Inspection: Regularly inspect all welding cables, torch, and ground clamp for signs of wear, cuts, or damage. Replace damaged components immediately.
  • Wire Feed Mechanism: For MIG welding, inspect the wire feed rollers and liner for wear or blockages. Clean as needed to ensure smooth wire feeding.
  • Storage: Store the machine in a dry, clean environment away from excessive dust and moisture.

6. Troubleshooting

If you encounter issues with your welding machine, refer to the following common problems and solutions:

  • No Power: Check the power cable connection, the ON/OFF switch, and the circuit breaker.
  • Poor Arc Start/Stability: Ensure proper ground clamp connection, check welding parameters (current, voltage, wire speed), and inspect consumables (electrode, contact tip, tungsten).
  • Wire Feeding Issues (MIG): Verify wire spool installation, check for tangled wire, ensure correct wire diameter groove is used, and inspect the contact tip for blockages.
  • Overheating: Allow the machine to cool down. Ensure ventilation openings are clear and not obstructed. Reduce duty cycle if continuously welding at high currents.

For persistent issues, contact customer support.

7. Specifications

Table of MIG-250 specifications
Figure 9: MIG-250 Technical Specifications
MIG-250 Specifications
AttributeValue
Power Supply Voltage (V)220V
Frequency (Hz)50/60
FunctionMIG, MMA, LIFT TIG
Input Power (KVA) - MIG4.1
Input Power (KVA) - MMA5.1
Input Power (KVA) - LIFT TIG3
Input Current (A) - MIG18.7
Input Current (A) - MMA23.2
Input Current (A) - LIFT TIG13.8
U1 DC (V) - MIG16-20
U1 DC (V) - MMA20.8-24.8
U1 DC (V) - LIFT TIG10.8-14.8
Welding Current Range (A) - MIG40-120
Welding Current Range (A) - MMA20-120
Welding Current Range (A) - LIFT TIG20-120
No-Load Voltage (V)62
Duty Cycle (%)40
Power Factor0.8/0.73
Insulate ClassF
Dimension (MM)320×145×190
Net Weight (KG)4.0
Wire Melting TypeGlobular Transfer
Max. Load Power Capacity23.2KVA
Rated Output Voltage220V
Welding Current/Voltage Range220V
Mig Solid Wire Diameter (mm)0.8mm, 1.0mm
Efficiency85% Inverter Welders
Applicable IndustriesMachinery Repair Shops

8. Warranty & Support

The ANDELI MIG-250 welding machine comes with a 1-year warranty.

For technical support, warranty claims, or any questions regarding your product, please contact customer service:

Contact information for customer service
Figure 10: Customer Service Contact Information
  • WhatsApp: +86 16633953613
  • Email: jinpin13@126.com

9. User Tips

No specific user tips were available from the provided reviews or Q&A content. Always refer to the detailed instructions for each welding process and practice on scrap material before working on your main project.


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.