ANDELI MIG-250 LED

Contents

ANDELI MIG-250 LED 3-in-1 Welding Machine User Manual

Model: MIG-250 LED

1. Introduction

Thank you for choosing the ANDELI MIG-250 LED 3-in-1 Welding Machine. This versatile and portable welder is designed for Gasless MIG, Stick (MMA), and Lift TIG welding, making it suitable for a wide range of applications including plants, construction sites, and general fabrication. This manual provides essential information for the safe and efficient operation and maintenance of your welding machine.

ANDELI MIG-250 LED 3-in-1 welding machine with accessories.
Figure 1: ANDELI MIG-250 LED 3-in-1 welding machine with included accessories.

2. Safety Information

Always prioritize safety when operating welding equipment. Read and understand all safety warnings and instructions before use. Failure to do so may result in serious injury or death.

  • Wear appropriate personal protective equipment (PPE), including a welding helmet with proper shade, flame-resistant clothing, welding gloves, and safety shoes.
  • Ensure adequate ventilation to avoid inhaling welding fumes.
  • Keep a fire extinguisher nearby.
  • Do not operate the machine in wet conditions or near flammable materials.
  • Ensure the machine is properly grounded.
  • Disconnect power before performing any maintenance or adjustments.

3. Product Features

  • 3-in-1 Functionality: Supports Gasless MIG, Stick (MMA), and Lift TIG welding.
  • IGBT Inverter Technology: Utilizes advanced IGBT inverters for increased efficiency, reliability, and duty cycle.
  • LED Digital Display Screen: Graphical design interface for easier operation and clear display of settings.
  • Synergic Control: Automatically matches voltage and wire feed speed, and adjusts current based on plate thickness, simplifying operation for beginners.
  • Separate Current & Voltage Regulation: Allows for precise control over welding parameters.
  • Portable Design: Compact and lightweight (approx. 4.16 kg) for easy transport and use in various locations.
  • Split Torch Design: MIG welding torch is designed for easy repair and replacement, ensuring smoother wire feeding.
Key features of the ANDELI MIG-250 LED welder: LED screen, gasless, easy installation, portable.
Figure 2: Key features of the ANDELI MIG-250 LED welding machine.

4. Specifications

ParameterSpecification
ModelMIG-250 LED
FunctionsGasless MIG, MMA (Stick), Lift TIG
Power Supply VoltageAC220V±15%, 50/60Hz
Rated Input Capacity (Kva)MIG: 4.1 Kva / MMA: 5.1 Kva
Rated Input Current (A)MIG: 18.7A / MMA: 23.2A
Output Current (A)MIG: 40-120A / MMA: 20-120A
No-load Voltage (V)60V
Rated Duty Cycle (%)60%
Efficiency (%)85%
Power Factor (cosφ)0.73
Protection ClassIP21S
Insulation ClassF
Cooling WayFAN
Machine Dimension (mm)330 x 160 x 210
MIG Solid Wire Diameter (mm)0.8mm, 1.0mm
MMA Electrode Diameter (mm)2.5mm, 3.2mm
Electrode TypeJ422/502/503/507
Net Weight (Kgs)4.16 Kgs
Welding Thickness1-4mm
Warranty1 Year

5. Setup

Before operating the welding machine, ensure it is placed on a stable, level surface with adequate ventilation. Follow these steps for initial setup:

  1. Unpacking: Carefully remove the welding machine and all accessories from the packaging. Verify that all components listed in the packing list are present.
  2. Power Connection: Connect the power cord to a suitable AC220V±15%, 50/60Hz power outlet. Ensure the power switch on the rear of the machine is in the 'OFF' position before plugging in.
  3. Ground Clamp Connection: Connect the ground clamp cable to the appropriate terminal on the front panel of the welder. Securely attach the ground clamp to the workpiece or welding table, ensuring good electrical contact.
  4. Torch Connection:
    • For MIG Welding: Connect the MIG torch to the designated MIG connector on the front panel. Install the flux-cored wire (0.8mm or 1.0mm) into the wire feeder compartment according to the machine's internal instructions.
    • For MMA (Stick) Welding: Connect the MMA electrode holder cable to the positive (+) terminal and the ground clamp to the negative (-) terminal (or vice-versa depending on electrode polarity requirements).
    • For Lift TIG Welding: Connect the TIG torch to the negative (-) terminal and the ground clamp to the positive (+) terminal. Ensure a suitable tungsten electrode is installed in the TIG torch.
  5. Power On: Flip the power switch on the rear of the machine to the 'ON' position. The LED digital display should illuminate.
Rear view of the ANDELI MIG-250 LED welding machine showing power switch and cooling fan.
Figure 3: Rear view of the welding machine with power switch.
ANDELI MIG-250 LED welding machine and included accessories in packaging.
Figure 4: Overview of the welding machine and its components.

6. Operation

The MIG-250 LED features an intuitive control panel with an LED digital display and two main knobs for adjustment.

6.1. Control Panel Overview

Detailed diagram of the control panel for easy operation.
Figure 5: Control Panel Layout and Functions.

Control Panel Elements:

  1. Function Area: Displays icons for selected welding modes (0.8 MIG, 1.0 MIG, MMA, Lift TIG).
  2. Cutting Plate Thickness Display: Shows the recommended plate thickness in millimeters (e.g., 2.0 mm).
  3. Cutting Plate Thickness Select Button:
    • Single-click: Adjust and select plate thickness.
    • Long press (above 5 seconds): Toggle on/off Advanced mode.
  4. Select Button: Used to navigate through settings or confirm selections.
  5. Voltage Knob: Adjusts welding voltage.
  6. Current Knob: Adjusts welding current.

6.2. Selecting Welding Mode

Use the 'Select Button' (4) to cycle through the available welding modes: Gasless MIG (0.8mm wire), Gasless MIG (1.0mm wire), MMA (Stick), and Lift TIG. The selected mode will be highlighted in the Function Area (1).

6.3. Synergic Operation (MIG Mode)

The machine's synergic design simplifies MIG welding. In MIG mode, adjusting the 'Voltage Knob' (5) or 'Current Knob' (6) will automatically match the other parameters (current, voltage, wire speed) to the selected plate thickness.

Synergy function explanation for automatic current and voltage matching.
Figure 6: Synergy function for automatic parameter matching.

For fine-tuning, you can long-press the 'Cutting Plate Thickness Select Button' (3) to enter Advanced mode, allowing for independent adjustment of current and voltage.

Control panel showing separate current and voltage regulation, with synergy button for thin sheet welding.
Figure 7: Separate current and voltage regulation for advanced control.

6.4. Lift TIG Welding

The Lift TIG feature allows for arc ignition by touching the tungsten electrode to the workpiece and then lifting it off. Welding is not controlled by a torch switch in this mode.

Lift TIG welding process with explanation of arc ignition.
Figure 8: Explanation of Lift TIG arc ignition.

6.5. Welding Applications

The machine is capable of welding various materials and thicknesses:

  • MIG (0.8mm/1.0mm wire): Suitable for Iron Plate, Galvanized Pipe.
  • MMA: Use with 2.5mm or 3.2mm electrodes.
  • Lift TIG: Ideal for Stainless Steel.
Examples of welding applications for MIG, MMA, and Lift TIG modes on various materials.
Figure 9: Welding applications for different modes and materials.
Video 1: This video provides an overview of the ANDELI MIG-250 LED welding machine, showcasing its portability, digital display, and welding capabilities.

7. Maintenance

Regular maintenance ensures the longevity and optimal performance of your welding machine.

  • Cleaning: Periodically clean the machine's exterior and ventilation openings to prevent dust and debris buildup. Use compressed air to clear internal components if necessary, ensuring the machine is unplugged.
  • Cable Inspection: Regularly inspect all welding cables, torches, and ground clamps for damage, fraying, or loose connections. Replace damaged components immediately.
  • Wire Feeder (MIG): Clean the wire feeder mechanism and replace worn drive rollers or contact tips as needed to ensure smooth wire feeding.
  • Cooling Fan: Ensure the cooling fan on the rear of the machine is free from obstructions to maintain proper airflow and prevent overheating.
  • Storage: Store the welding machine in a dry, clean environment when not in use.

8. Troubleshooting

This section addresses common issues you might encounter with your welding machine.

  • No Power: Check the power cord connection, the power switch on the machine, and the circuit breaker at your power source.
  • No Arc: Ensure the ground clamp has good contact with the workpiece. Check for proper torch connection and electrode/wire installation. Verify welding parameters are set correctly for the chosen mode.
  • Poor Weld Quality: Adjust welding current, voltage, and wire feed speed (for MIG) according to the material thickness and welding process. Ensure the workpiece is clean and free of contaminants. Check for proper electrode/wire size and type.
  • Overheating: If the machine shuts down due to overheating, allow it to cool down. Ensure ventilation openings are clear and the cooling fan is functioning. Reduce the duty cycle or welding current if operating continuously at high settings.
  • Wire Feeding Issues (MIG): Check for tangled wire, worn contact tip, incorrect drive roller tension, or a clogged liner in the MIG torch.

9. User Tips

  • Start with Synergy: For beginners, utilize the synergic function in MIG mode. It automatically sets optimal parameters based on plate thickness, making it easier to achieve good welds.
  • Practice on Scrap: Before welding on your main project, practice on scrap pieces of the same material and thickness to fine-tune your settings and technique.
  • Portability Advantage: The compact and lightweight design makes this welder ideal for mobile repairs or projects in different locations. Take advantage of its portability for convenience.
  • Gasless MIG: Remember this machine supports gasless flux-cored MIG welding, eliminating the need for an external gas cylinder, which can be a significant convenience for hobbyists or outdoor work.

10. Warranty and Support

The ANDELI MIG-250 LED Welding Machine comes with a 1-year warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.

For technical support, troubleshooting assistance, or warranty inquiries, please contact customer service:

  • WhatsApp: +86 16633953613
  • Email: jinpin13@126.com
Customer service contact information including WhatsApp and Email.
Figure 10: Customer Service Contact Information.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.