1. Introduction
The ANDELI TIG-250PL is a versatile AC DC Pulse Cold Welding Machine designed for precision welding of various metals, including aluminum, stainless steel, and thinner materials. This inverter-based welding machine offers dual voltage compatibility (110V/220V) and multiple welding modes such as pulse TIG, HF TIG, cold pulse, and cold welding. Its integrated digital display and intuitive controls ensure ease of use and high-quality welding results.

Figure 1: Front view of the ANDELI TIG-250PL welding machine
2. Setup
2.1 Unpacking and Contents
Carefully unpack the welding machine and all accessories. Ensure all items listed below are present:
- TIG-250PL ACDC 110V / 220V Welding Machine
- American Standard Power Plug
- Grounding Clamp (2m)
- Aluminum Torch WP-26 (4m)
- Nozzles (20 pcs)
- Collets (20 pcs)
- Hose Clamps (2 pcs)
- Pyrex Cup Kit (49 pcs)
- Tungsten Electrodes (10 pcs)
- Foot Switch (1 pc)
2.2 Power Connection
The TIG-250PL supports dual voltage operation (110V/220V). Connect the machine to an appropriate power source. If converting between 220V and 110V, use the provided power conversion line.


Figure 2: 110V Power Plug and Power Conversion Line
2.3 Gas Connection
Connect the gas tube to the Gas Tube Connector on the rear panel of the machine. For cold welding, pure argon gas is required to achieve optimal results and prevent discoloration.

Figure 3: Rear Panel Connections (ON/OFF Switch, Gas Tube Connector, Power Cable)
2.4 Front Panel Connections
Connect the welding torch, grounding clamp, and foot switch to their respective ports on the front panel as shown in Figure 4.

Figure 4: Front Panel Connections (Negative Pole, Remote Control, Gas-power Connector, Positive Pole, Two-core Connector)
3. Operating Instructions
3.1 Control Panel Overview
The TIG-250PL features a clear digital display and an intuitive control panel for selecting functions and adjusting parameters. Refer to Figure 5 for an overview of the control panel.

Figure 5: Control Panel (Screen, Function buttons, Adjustment Knob)
3.2 Welding Modes and Applications
The TIG-250PL offers various welding modes to suit different materials and applications:
- AC Cold Spot Welding: Ideal for thin aluminum welding, minimizing deformation and discoloration.
- AC Argon Arc Pulse: Suitable for quick welding of aluminum plates.
- DC Cold Spot Welding: Used for sheet metal welding, producing clean welds with no discoloration or need for sanding.
- DC Cold Welding Interval: Enables rapid, continuous spot welding on sheet metal.
- DC TIG Spot Welding: Designed for welding thicker plates.
- DC Argon Arc Pulse: Provides fast welding for thick plates.


Figure 6: Examples of Cold Spot Welding on Aluminum and Stainless Steel
3.3 General Operation Steps
- Power On: Flip the ON/OFF switch on the rear panel.
- Select Mode: Use the AC/DC button to choose between alternating current and direct current.
- Choose Trigger Mode: Select 2T (two-stroke) or 4T (four-stroke) for torch trigger operation.
- Select Welding Function: Press the TIG, Cold, or Pulse buttons to activate the desired welding mode.
- Adjust Parameters: Use the adjustment knob and corresponding function buttons to set parameters such as Pre-Flow, Start Current, Rise Time, Base Current, Frequency, Pulse Width, Time, Crater Current, Post-Flow, and AC Clean PW. The digital display will show the current settings.
- Save Settings (Optional): Use the 'Save' and 'M' (Memory) buttons to store and recall frequently used welding parameters.
- Begin Welding: Initiate welding using the torch trigger or foot switch.
Video 1: ANDELI TIG-250PL Product Demonstration and Welding Modes
4. Maintenance
Regular maintenance ensures the longevity and optimal performance of your welding machine.
- Cleaning: Periodically clean the exterior of the machine and the control panel with a dry, soft cloth. Ensure ventilation openings are free from dust and debris.
- Connection Checks: Regularly inspect all electrical and gas connections for tightness and signs of wear or damage.
- Consumables: Check the condition of the welding torch, nozzles, collets, and tungsten electrodes. Replace worn or damaged consumables promptly to maintain weld quality.
- Ventilation: Ensure the machine is operated in a well-ventilated area and that the air cooling system (AIR) is not obstructed.
5. Troubleshooting
This section provides solutions to common issues you might encounter.
| Problem | Possible Cause | Solution |
|---|---|---|
| Machine does not power on | No power supply; ON/OFF switch off; Faulty power cable | Check power outlet; Ensure ON/OFF switch is in 'ON' position; Inspect power cable for damage. |
| Poor welding performance (e.g., unstable arc, poor penetration) | Incorrect parameter settings; Insufficient gas flow; Worn or contaminated electrode/nozzle | Adjust welding current, frequency, pulse settings; Check gas cylinder and flow rate; Replace or clean electrode/nozzle. |
| No gas flow | Gas cylinder empty; Gas valve closed; Hose kinked or damaged | Check gas cylinder level; Open gas valve; Inspect gas hose for obstructions. |
| Error code displayed | Internal fault or specific operational issue | Note the error code and consult the full user manual (if available) or contact support. |
6. Specifications
Detailed technical specifications for the ANDELI TIG-250PL welding machine:
| Parameter | TIG (AC) | TIG (DC) | PULSE (AC) | PULSE (DC) | COLD (AC) | COLD (DC) |
|---|---|---|---|---|---|---|
| Power Supply Voltage | 220V±10% (also supports 110V with converter) | |||||
| Frequency | 50Hz | |||||
| No-Load Voltage | 64V | |||||
| Rated Input Power | 8.1KW | |||||
| Effective Input Current | 37A | |||||
| Welding Current Range | 10-200A | 10-200A | 10-200A | 10-200A | BY SET | BY SET |
| Power Factor | 0.76 | |||||
| Efficiency | 60% | |||||
| Load Voltage | 10.4-18V | |||||
| Pre-Flow Time | 0.1-1S | |||||
| Post-Flow Time | 1-10S | |||||
| Rated Duty Cycle @40°C (TIG) | 60% | |||||
| Duty Cycle (25%) | 200A/18V | |||||
| Duty Cycle (60%) | 129A/15.2V | |||||
| Duty Cycle (100%) | 100A/4V | |||||
| Arc-starting Current | 10-200A | |||||
| Slow Rise Time | 0-5S | |||||
| Pulse Frequency | / | / | 0.5-100Hz | 0.5-100Hz | / | / |
| Pulse Width Range (Duty Ratio) | / | / | 5-100% | 5-100% | / | / |
| AC Clean Width (AC Balance) | 20-50% | |||||
| AC Frequency | 40-100Hz | |||||
| Base Current | 10-200A | |||||
| Current Decay Time | 0-5S | |||||
| Crater Current | 10-200A | |||||
| Welding Thickness | 0.8-5mm | 0.4-1mm | ||||
| Protection Class | IP21S | |||||
| Insulation Class | H | |||||
| Cooling | AIR | |||||
General Specifications:
- Material / Metal Processed: Carbon Steel, Stainless Steel, Aluminium alloy
- Output Polarity: AC/DC TIG
- Weight (KG): 12.6KG
- Dimensions (L×W×H): 500mm × 238mm × 390mm
- Feature: Integrated Digital Display
- Key Selling Points: High Safety Level

Figure 7: TIG-250PL Machine Dimensions
7. Warranty & Support
7.1 Warranty Information
The ANDELI TIG-250PL welding machine comes with a 1-Year Warranty from the date of purchase. Please retain your proof of purchase for warranty claims.
7.2 Customer Support
For any questions, technical assistance, or support, please contact our customer service:
- WhatsApp: +86 16633953613
- Email: jinpin13@126.com

Figure 8: Customer Service Contact Details
8. User Tips
- For optimal cold welding results, always ensure pure argon gas is used. This helps in achieving silver-white welds and minimizing discoloration on aluminum and stainless steel.
- The machine's portable design with a convenient handle makes it easy to move between different workstations or job sites.
- Take advantage of the dual voltage capability (110V/220V) by using the provided power conversion line to adapt to various power environments, enhancing flexibility.