ANDELI MIG 250

Contents

ANDELI MIG 250 Multi-Process Welding Machine User Manual

Model: MIG 250 | Brand: ANDELI

1. Introduction

The ANDELI MIG 250 is a versatile and portable multi-process welding machine designed for various welding tasks. It supports MIG (Gasless Flux Welding), Lift TIG, and MMA (Stick Welding) modes, making it suitable for both hobbyists and professionals. Featuring an intuitive LED display and synergy control, this inverter welder offers ease of use and precise welding performance.

2. Key Features

  • Multi-functional 3-in-1 Welding: Supports MIG (Flux Welding), Lift TIG, and MMA welding modes.
  • LED Display Screen: Larger display with a graphical interactive interface for easier operation and monitoring of welding parameters.
  • MCU Intelligent Chip: Enhances control and precision.
  • Synergy Control: Automatically matches current and voltage settings when adjusting the knob, simplifying setup.
  • Portable Design: Lightweight at approximately 4.0 KG, making it easy to transport.
  • Easy Installation: Designed for straightforward setup.
  • Gasless Flux Welding: Eliminates the need for an external gas cylinder for MIG welding.
Image showing the multi-functional capabilities of the ANDELI MIG 250, including MIG, Lift TIG, and MMA welding.
Figure 2.1: Multi-functional Welding Modes (MIG, Lift TIG, MMA)
Image highlighting key features: Without Cylinder, LED Screen, Easy Installation, Small Portable.
Figure 2.2: Key Features of the MIG 250

3. Technical Specifications

AttributeValue
Brand NameANDELI
ModelMIG 250
OriginMainland China, Zhejiang
CertificationCE
Material / Metal ProcessedSTAINLESS STEEL
Rated Input Voltage110V/220V
Wire Melting TypeShort Circuit Transfer
Max. Load Power Capacity5.9KW
Rated Output Current120 A
Rated Output Voltage17.9 V
Welding Current/Voltage Range20-120
Rated Duty Cycle @40°C (MIG)60%
Wire Feeding Speed12 m/min
Weight4.0 KG
FeatureINVERTER, Portable
Degree of ProtectionIP21S
Degree of InsulationF
Battery IncludedNo
High-concerned chemicalNone
Technical specifications table for MIG, MMA, and TIG welding modes at 100V and 200V input.
Figure 3.1: Detailed Technical Specifications

4. Package Contents & Machine Overview

The following items are typically included with your ANDELI MIG 250 welding machine:

  • Ground Clamp (2M)
  • MIG Torch (3M)
  • MMA Holder (3M)
  • Flux-cored Wire
  • Nozzle (x5)
  • Nozzle Shield (x2)
  • Welding Rod (x5)
Image showing the ANDELI MIG 250 welding machine and its included accessories: ground clamp, MIG torch, MMA holder, flux-cored wire, nozzles, and welding rods.
Figure 4.1: Welding Machine and Included Accessories
Front panel of the ANDELI MIG 250 with labels for Select Button, Knob, Function Area, Torch Interface, Positive Pole, Negative Pole, and Two-core Plug.
Figure 4.2: Front Panel Overview

5. Setup Instructions

  1. Power Connection: Connect the welding machine to a suitable 110V or 220V power supply. Ensure the power source matches the machine's requirements.
  2. Ground Clamp Connection: Attach the ground clamp cable to the negative (-) terminal on the front panel. Securely clamp the other end to your workpiece to ensure a good electrical connection.
  3. MIG Torch/MMA Holder Connection:
    • For MIG Welding: Connect the MIG torch to the 'Torch Interface' port and the positive (+) terminal.
    • For MMA Welding: Connect the MMA holder to the positive (+) terminal.
    • For Lift TIG Welding: Connect the TIG torch (not included) to the 'Torch Interface' port and the negative (-) terminal.
  4. Wire Installation (MIG): Install the flux-cored wire into the wire feeder mechanism according to the instructions inside the wire compartment. Ensure the wire size matches the selected setting on the machine.
  5. Electrode Installation (MMA): Insert the appropriate welding rod into the MMA holder.

6. Operating Instructions

6.1 Control Panel Overview

The ANDELI MIG 250 features an intuitive LED display and control knob for easy parameter adjustment.

Close-up of the LED display showing welding parameters and mode selection icons.
Figure 6.1: LED Display Screen

6.2 Mode Selection and Parameter Adjustment

  1. Power On: Turn on the welding machine using the main power switch.
  2. Select Welding Mode: Use the 'Select Button' (red button on the right side of the display) to cycle through the available welding modes: MIG (0.8mm wire), MIG (1.0mm wire), MMA, and Lift TIG. The selected mode will be indicated on the LED display.
  3. Adjust Parameters with Synergy Knob: The large 'Knob' below the select button is the synergy control. Rotate the knob to adjust the primary welding parameter (e.g., current). The machine will automatically adjust other related parameters (voltage, wire speed) to maintain optimal welding conditions.
  4. Fine-tuning: For precise control, you can fine-tune the settings based on the thickness of the welding plate and specific material requirements.
Image illustrating the synergy knob and its function to automatically match current, voltage, and wire speed based on adjustment.
Figure 6.2: Synergy Knob for Automatic Parameter Matching

6.3 Control Panel Demonstration Video

Video 6.1: Demonstration of the control panel and mode selection.

6.4 Welding Applications and Effects

The MIG 250 is capable of producing quality welds on various materials:

  • MIG (Flux): Suitable for Iron Plate (1mm S.S Plate, 1mm C.S Plate, 3mm C.S Plate) and Galvanized Pipe.
  • TIG: Ideal for 3mm S.S Plate.
  • MMA: Effective with 2.5 Electrode.
Examples of welding effects for MIG (Flux), TIG, and MMA on different materials and thicknesses.
Figure 6.3: Examples of Welding Effects

7. Maintenance

Regular maintenance ensures the longevity and optimal performance of your welding machine. Always disconnect the power supply before performing any maintenance.

  • Cleaning: Periodically clean the machine's exterior and ventilation openings to prevent dust and debris buildup, which can hinder cooling.
  • Cable Inspection: Check all welding cables, connections, and the power cord for any signs of damage, wear, or loose connections. Replace damaged parts immediately.
  • Torch and Holder Maintenance: Clean the MIG torch nozzle, contact tip, and diffuser regularly. For MMA, ensure the electrode holder jaws are clean and provide a firm grip.
  • Storage: Store the machine in a dry, clean environment, away from excessive dust and moisture.

8. Troubleshooting

This section covers common issues you might encounter and their potential solutions.

ProblemPossible CauseSolution
Machine does not power onNo power supply; Faulty power cord/plug; Internal fuse blownCheck power outlet and connections; Inspect power cord; Contact support if fuse is suspected
No welding arcPoor ground connection; Incorrect welding parameters; Damaged torch/holder; Overheat protection activatedEnsure good ground contact; Adjust current/voltage; Inspect and replace damaged parts; Allow machine to cool down
Poor weld qualityIncorrect parameters; Improper technique; Contaminated workpiece; Wrong wire/electrode sizeAdjust settings; Practice welding technique; Clean workpiece; Use correct consumables
Wire feeding issues (MIG)Tangled wire; Clogged contact tip; Incorrect tension; Worn linerUntangle wire; Clean/replace contact tip; Adjust wire tension; Replace liner

If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact customer support.

9. User Tips

No specific user tips were available from buyer reviews or Q&A content for this product at this time. General tips for welding include:

  • Always wear appropriate personal protective equipment (PPE), including a welding helmet, gloves, and protective clothing.
  • Ensure good ventilation in your welding area.
  • Practice on scrap metal to get a feel for the machine and settings before working on your main project.
  • Keep your work area clean and free of flammable materials.

10. Warranty and Support

The ANDELI MIG 250 welding machine comes with a 1-Year Warranty from the date of purchase.

For technical support, warranty claims, or any other inquiries, please contact ANDELI customer service:

  • WhatsApp: +86 16633953613
  • Email: jinpin13@126.com
Image displaying contact information for customer service via WhatsApp and Email, including a QR code.
Figure 10.1: Customer Service Contact Information

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.