1. Introduction
Thank you for choosing the ANDELI Auto Darkening Welding Helmet, Model ZEUS. This helmet is designed to provide superior protection and enhanced visibility for various welding, cutting, and grinding applications. Featuring a large 180° panoramic view, true color lens technology, and four highly sensitive arc sensors, it ensures optimal safety and comfort. Please read this manual thoroughly before use to ensure proper operation and maintenance.

2. Product Features
- True Color Lens: Provides 1/1/1/2 optical clarity for a clear and natural view of the workpiece.
- 180° Panoramic View: Offers an expansive viewing area for improved situational awareness.
- 4 Arc Sensors: Ensures rapid and reliable auto-darkening response.
- Full Protection: Shields against harmful ultraviolet (UV), infrared (IR), and strong light radiation.
- Adjustable Headband: Soft, comfortable headband with fore and aft movement adjustment for a better fit.
- Multiple Modes: Dedicated modes for Weld, Cut, and Grind operations.
- Solar Powered: Equipped with a solar cell and two replaceable lithium batteries (CR2032).


3. Setup and Adjustment
- Headband Adjustment:
The helmet features a soft, adjustable headband for a comfortable and secure fit. Adjust the slack adjustment knob at the back of the headband to fit your head circumference. Use the fore and aft movement adjustment to position the helmet correctly on your head, ensuring the viewing area is aligned with your eyes. - Battery Installation/Check:
The helmet uses a solar cell and two replaceable CR2032 lithium batteries. Ensure batteries are correctly installed and charged. A low battery reminder is integrated into the system.


4. Operating Instructions
- Mode Selection:
Use the mode toggle switch on the side of the helmet to select between GRIND, CUT, and WELD modes.- **GRIND MODE (DIN 4):** When "Grind" mode is set, the lens will not respond to any arc. This mode is only for Grinding. Set back to "Weld" or "Cut" as soon as finished Grinding to avoid accidental flash.
- CUT MODE (DIN 5-9): When the mode toggle switch is on "Cut", the "Shade" dial will have a range of "5-9".
- WELD MODE (DIN 9-13): When the mode toggle switch is on "Weld", the "Shade" dial will have a range of "9-13".
- Shade Adjustment:
Rotate the "Shade" dial to select the appropriate shade level for your welding or cutting process. Refer to industry standards for recommended shade levels based on amperage and material. - Sensitivity Adjustment:
The sensitivity knob allows stepless adjustment of how quickly the lens darkens in response to an arc. Adjust to prevent accidental darkening from ambient light or to ensure quick response to the welding arc. - Delay Adjustment:
The delay knob controls the time the lens remains darkened after the arc stops. Adjust the delay time (0.3S-0.6S-0.9S) to prevent eye fatigue from residual bright light after welding.



Product Showcase Video
5. Maintenance
- Cleaning: Regularly clean the helmet shell and lens with a soft, damp cloth. Avoid abrasive cleaners or solvents that could damage the lens or helmet material.
- Lens Protection: Replace outer and inner protective lenses if they become scratched or damaged to maintain optical clarity and protection.
- Battery Replacement: If the low battery indicator activates, replace the two CR2032 lithium batteries. Ensure correct polarity during installation.
- Storage: Store the helmet in a dry, clean environment away from direct sunlight and extreme temperatures.
6. Troubleshooting
- Helmet not darkening:
- Check battery level; replace if low.
- Ensure arc sensors are clean and unobstructed.
- Verify the mode switch is not in "Grind" mode.
- Perform an ADF Test (refer to specifications for ADF Test feature).
- Poor visibility:
- Clean the lens and protective covers.
- Replace scratched or damaged protective covers.
- Adjust sensitivity settings.
- Helmet uncomfortable:
- Adjust the headband's circumference and fore/aft position.
- Ensure the soft silicone cushion is properly seated.
7. Specifications
| Feature | Specification |
|---|---|
| Model | ZEUS |
| Filter Size | 119 x 137mm (4.69" x 5.39") |
| View Area | 100 x 95mm (3.94" x 3.74") |
| Side View Area | 105 x 35mm (4.13" x 1.38") |
| Arc Sensor | 4 |
| True Color | Yes |
| Optical Class | 1/1/1/2 |
| Light States | DIN4 |
| Dark States | DIN5-9 / DIN9-13 |
| Dimming Adjustment | External |
| Sensitivity Adjustment | Stepless Shift |
| Response Time (Bright-Dark) | 0.1-0.3mS |
| Delay Time | 0.3S-0.6S-0.9S |
| UV/IR Protection | DIN 16 |
| Mask Material | PP |
| Battery Capacity | 210mAh |
| Low Battery Reminder | Yes |
| Replaceable Battery | Yes |
| Operating Temperature | -5°C to 55°C |
| Storing Temperature | -5°C to 75°C |
| Grinding Function | Yes |
| Cut Function | Yes |
| ADF Test | Yes |
| Battery Type | Solar Cell + 2 Replaceable Lithium Batteries |

8. Warranty and Support
This ANDELI welding helmet comes with a 1-year warranty from the date of purchase. For any technical assistance, warranty claims, or general inquiries, please contact customer support:
- WhatsApp: +86 16633953613
- Email: jinpin13@126.com

9. User Tips
- Always perform a quick function check before starting any welding or grinding task to ensure the auto-darkening feature is working correctly.
- Keep the solar panel and arc sensors clean to ensure optimal performance and battery charging.
- Experiment with sensitivity and delay settings in a safe environment to find what works best for your specific application and comfort.
- Utilize the true color lens feature to improve visibility and reduce eye strain during prolonged use.