E-ACE B60P

Contents

E-ACE B60P 4K Car DVR User Manual

Model: B60P | Brand: E-ACE

1. Introduction

Thank you for choosing the E-ACE B60P 4K Car DVR. This device is designed to provide high-quality video recording for your vehicle, enhancing driving safety and providing reliable evidence in case of incidents. Featuring 4K Ultra HD recording, a Sony IMX678PL sensor, built-in GPS, Wi-Fi connectivity, and advanced parking monitoring, this dashcam is a comprehensive solution for your in-car recording needs. Please read this manual thoroughly before use to ensure proper installation and operation.

E-ACE B60P 4K Car DVR with GPS and WiFi features

Figure 1: E-ACE B60P 4K Car DVR with GPS and WiFi features

2. Package Contents

Please check the package contents upon unboxing:

  • 1 x Packaging box
  • 1 x 4K Dashcam with built-in GPS
  • 1 x Original Car charger
  • 1 x User manual
  • 1 x Gift (Card Reader)
  • 1 x 2.5K Night Vision Rearview Camera With 6 Meters Cable (Optional, check your specific package)
  • 1 x Hardwire Kit For 24H Parking Monitoring (Optional, check your specific package)
Contents of the E-ACE B60P Dashcam package

Figure 2: Package contents including dashcam, car charger, installation tools, manual, and card reader.

3. Specifications

FeatureSpecification
Installation TypePortable Dashcam
Camera SensorSONY Starvis 2 IMX678 (Front 12MP + Rear 2MP)
Front Camera Lens6 Glass, 170° Angle, F1.8 Aperture
Rear Camera Lens4 Glass, 140° Angle, F1.8 Aperture
Front Video Resolution3840x2160P@30FPS (4K)
Rear Video Resolution2560x1440P@30FPS (2.5K)
Photo Resolution12M (1800Mega Pixels)
Video CodeH.264
Video FormatMOV, TS, MP4
Display Size3.2 inches OLED
BatteryBuilt-In Supercapacitor and Coin Cell (small, for time/settings only)
OSD LanguageBelarusian, Chinese (Simplified), Danish, Dutch, English, Filipino, Finnish, Irish, Persian, Polish, Russian, Thai, Vietnamese, Welsh, Yiddish
Special FeaturesG-Sensor, Loop-Cycle Recording, Parking Monitor, Built-in GPS, Anti Surge Voltage Impact, Waterproof, Anti Fog, Anti Vibration, Real Time Surveillance, Automatic White Balance, Wide Dynamic Range, WiFi Function, NightShot Function, Audio Recorded
Max External Memory512GB (Micro SD Card, Class 10 required)
Chipset ManufacturerNOVATEK
Frames Per Second30
InterfaceUSB 2.0, AV-In, Micro SD/TF
Dimensions (approx.)8.5cm (L) x 3.2cm (W) x 6.5cm (H)
Product dimensions and button layout

Figure 3: Product dimensions and button layout

4. Product Overview

The E-ACE B60P Car DVR features a compact design with intuitive controls and essential ports for functionality.

4.1 Device Layout

Detailed view of the dashcam showing ports and buttons

Figure 4: Detailed view of the dashcam showing ports and buttons

4.2 Button Functions

  • Power Button:
    • Function 1 (Power On/Off): Long press for 3 seconds to power on/off. When powering off, the device automatically saves video files and user settings.
    • Function 2 (Switching Display): Short press to cycle through screen displays.
  • OK Button:
    • Function 1 (Video Recording): Turn on/off video recording.
    • Function 2 (Confirm): In menu options, press to confirm and save settings.
  • Up Button:
    • Function 1 (Page Up): Navigate up in menu settings and playback mode.
    • Function 2 (Recording On/Off): Short press to toggle recording function.
  • Down Button:
    • Function 1 (Page Down): Navigate down in menu settings and playback mode.
    • Function 2 (Screen Display Switching): Short press to switch between front, back, or front+back screen displays.
    • Function 3 (Camera Function): Long press to take a photo.
  • Menu Button (M button):
    • Function 1 (Menu Access): Short press to enter the menu page for function settings.
    • Function 2 (Playback Access): Long press to enter the playback interface for recorded videos and photos.

5. Installation Guide

5.1 Preparation

  • Turn off the car engine.
  • Insert a high-speed TF card (Class 10 or above, minimum 32GB, maximum 512GB) into the card slot of the recorder.

5.2 Dashcam Mounting

  1. Fix the recorder securely on the car windshield, ensuring a clear view.
  2. Adjust the lens position to ensure it is level with the ground for optimal recording angle.

5.3 Power Supply Methods

There are two primary methods to power the dashcam:

  1. Cigarette Lighter Power Supply:
    • Plug the 12V-24V power adapter (car charger) into the vehicle's 12V cigarette lighter port.
    • Connect the other end of the car charger to the device's USB port.
    • The device will start once the car engine is launched.
  2. Hardwire Kit Power Supply (Recommended for 24H Parking Monitoring):
    • This method requires a separate Hardwire Kit (optional package).
    • Connect the RED wire of the Hardwire Kit to a fuse slot that provides constant power.
    • Connect the YELLOW wire of the Hardwire Kit to a fuse slot that provides power only when the key is in the ACC position.
    • Connect the BLACK wire to a grounding screw or bolt in the vehicle.
    • This method avoids occupying the cigarette lighter interface and enables advanced parking monitoring features.
    Wiring diagram for 24-hour parking monitoring with Hardwire Kit

    Figure 5: Hardwire Kit wiring diagram for 24-hour parking monitoring

5.4 Rear Camera Installation (Optional)

If your package includes a rear camera:

  1. Install the rear camera at the rear of the vehicle, paying attention to its orientation.
  2. Route the wiring along the roof of the vehicle to the front dashcam.
  3. Connect the rear camera plug to the AV-IN interface on the dashcam.
  4. For Reversing Assistance: Connect the rear camera's red cable wire to your car's reverse lamp power's positive pole (+). When you engage reverse gear, the dashcam will automatically switch to the rear camera view with parking lines. If this function is not desired, do not connect the red wire.
Front and rear camera view angles

Figure 6: Front and rear camera view angles

Dashcam installation in a car interior

Figure 7: Dashcam installation in a car interior

Rear camera cable length options

Figure 8: Rear camera cable length options (6m, 10m, 15m)

Rear view camera wiring diagram for reversing light connection

Figure 9: Rear view camera wiring diagram for reversing light connection

6. Operation

6.1 Automatic Recording

Once the car engine starts, the recorder automatically powers on and begins recording. The charging indicator lights up, and the recording indicator flashes. When the car engine is turned off, the recorder automatically saves the recorded content and shuts down. Recorded images are saved in segments on the TF card. When the TF card is full, older recordings will be overwritten by new ones (Loop Recording). The recording time period can be set in the menu (1, 3, or 5 minutes).

6.2 Collision Sensing (G-Sensor)

This unit has a built-in G-sensor. In the event of a vehicle collision, the recorder will automatically lock the video footage at the time of the accident, saving it as a special, protected file that will not be overwritten. A lock icon will appear in the upper left corner of the display. The sensitivity of the G-sensor can be adjusted in the settings menu.

6.3 Date and Time Setting

In standby mode, short press the [Menu key] to enter the system settings. Use the [Up key]/[Down key] to navigate to the date and time option, then press [Confirm key]. Adjust the date and time using the up/down keys and switch between year, month, day, and time cursors with the mode key. Ensure correct time settings for accurate evidence recording. The time can also be automatically synchronized when connected to your mobile phone's Wi-Fi.

6.4 One-Button Mute Function

While recording, short press the [Up Button] to mute the microphone. A disabled microphone icon will appear, indicating that audio recording is off. Short press the [Up Button] again to restore audio recording. Settings are automatically saved.

6.5 Playback of Recorded Files

Press and hold the [Mode M Key] for 2-3 seconds to switch to playback mode. Use the [Up Key]/[Down Key] to browse files. Short press the [Confirm Key] to play a selected file. To exit playback mode, short press the [Mode Key].

6.6 Parking Monitoring Function

This function requires the ACC three-core Hardwire Kit (optional package). Once connected to the ACC power supply, navigate to the menu interface, find 'Parking Monitoring', and turn it on. Options include Off, Low, Medium, and High sensitivity. When the car is off and parked, if it detects slight vibrations (G-sensor must also be enabled), the recorder will automatically start emergency recording to capture important events.

6.7 Time-Lapse Recording Function

This function also requires the ACC three-core Hardwire Kit (optional package). It allows for extended recording times by capturing fewer frames per second. Options include Off, 12 hours, 24 hours, and 72 hours. For example, 1 frame per second can record 30 minutes of video in one minute, significantly saving memory card space and protecting your vehicle for over 24 hours. The time-lapse interval (1, 2, or 5 seconds per frame) can be selected in the menu.

Time-lapse video recording comparison and duration

Figure 10: Time-lapse video recording comparison and duration

6.8 GPS Function

The dashcam has a built-in GPS function. After successful GPS positioning, the GPS icon on the video interface will turn green. You can access 'Satellite information' in the menu to view longitude and latitude data. Note that GPS positioning requires an open environment, and weak signal areas may cause temporary signal loss.

Dashcam display showing GPS speed, WiFi info, time, and date

Figure 11: Dashcam display showing GPS speed, WiFi info, time, and date

6.9 Wi-Fi and App Control

The dashcam can connect to your smartphone via Wi-Fi using the 'Viidure' app (available for Android and iPhone).

  1. App Download: Scan the QR code in the manual (or search 'Viidure' in your app store) to download and install the app.
  2. Connecting to Wi-Fi: Power on the dashcam. On your phone, go to Wi-Fi settings and connect to the dashcam's Wi-Fi network (e.g., 'CVR-********'). The default password is '12345678'.
  3. Using the App: Open the 'Viidure' app. You can access the camera view, play recorded videos, and manage settings. You can download 4K videos directly to your phone and share them.

Video 1: Product demonstration and app connectivity

App control interface for the dashcam

Figure 12: App control interface for the dashcam

7. Maintenance

  • Use only the original factory standard adapter charger.
  • Do not attempt to dismantle the machine yourself, as this may void the warranty.
  • Regularly check the TF card for errors and format it periodically to maintain optimal recording performance.
  • Keep the camera lenses clean to ensure clear video quality.

8. Troubleshooting

8.1 APP Connection Issues (Black Screen/Crash)

Q: After connecting to the recorder's WiFi, a black screen or flash back happens after accessing the APP, or I cannot access the APP.

A:

  1. Android Phones: If your Android phone alerts "This WLAN network has no Internet access. Connect anyway," you must choose "Connect anyway" or a similar prompt. If you ignore it or choose not to use it, the phone will not be able to access the APP, or the screen may go black/crash. Go to your phone settings, forget the WiFi password, re-enter it, and choose "Connect anyway" when prompted.
  2. Permission Issues: If the problem persists, the APP's permissions might be limited by your phone. Uninstall and re-download the APP, ensuring all necessary permissions are granted. For iPhone users, specifically check if APP permissions are turned down.

8.2 Memory Card Issues

Q: The recorder does not read the memory card, or video recording is intermittent.

A: Ensure you are using a genuine, high-speed Class 10 TF card from a reputable brand (e.g., SanDisk, Toshiba, Kingston). Ultra HD recorders require high speed and stability. Replacing a low-quality/low-speed card with a suitable one should resolve the issue.

8.3 Device Malfunction (Flash Screen/Abnormal Switch)

Q: The recorder has a flash screen or exhibits abnormal switching.

A: Check that the power connector is plugged in properly. Verify that the voltage and current of the power supply are sufficient. This can occur if the voltage is unstable or the current is too low. Ultra HD recorders typically require a 5V/3A power supply.

9. User Tips

  • For 24-hour parking monitoring, ensure you select a package that includes the Hardwire Kit, as it is essential for this feature.
  • Always use a high-quality, high-speed (Class 10 or higher) Micro SD card to prevent recording errors and ensure smooth 4K video capture.
  • If experiencing issues with the mobile app, double-check your phone's Wi-Fi settings to ensure it's connected to the dashcam's network and that all app permissions are granted.

10. Warranty and Support

The E-ACE B60P Car DVR comes with a 365-day warranty. For technical support or warranty claims, please contact E-ACE customer service:

  • Website: www.e-ace.cn
  • Email: fireking@e-ace.cn
  • Phone: +86 0755-8464 4084
  • Tel(WhatsApp): +86-18127083357
  • Address: Floor 2nd, No.1 Yuanxia street, Pingshan District, Shenzhen City, Guangdong Province, 518000, China

The product is certified with CE, FCC, and RoHS standards.

User manual PDF icon

For a detailed PDF version of the user manual, please refer to the official website or contact support.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.