1. Introduction
This manual provides essential information for the safe and efficient operation of your Anern Hybrid Solar Inverter. This multi-function inverter/charger combines the capabilities of an inverter, solar charger, and battery charger to deliver uninterruptible power in a portable size. Its comprehensive LCD display allows for user-configurable and easy-to-access button operation, enabling adjustments to battery charging current, AC/solar charger priority, and acceptable input voltage based on various applications.
Please read this manual thoroughly before installation and use, and keep it for future reference.
2. Safety Information
Always observe the following safety precautions to reduce the risk of electric shock, fire, or injury to persons.
- Ensure all wiring is performed by qualified personnel.
- Do not disassemble the inverter. Refer servicing to qualified service personnel.
- Keep the inverter away from flammable materials and moisture.
- Ensure proper ventilation around the inverter to prevent overheating.
- Before performing any maintenance or cleaning, disconnect all power sources to the inverter.
3. Product Features
- Pure sine wave solar inverter for high-quality AC power.
- Output power factor of 1.0.
- Built-in MPPT solar charger (80A for ECO series, 40A for ES series).
- High PV input voltage range (30-400VDC for ECO series, 20-150VDC for ES series).
- Built-in anti-dust kit for enhanced durability in harsh environments.
- Smart battery charge design to optimize battery life.
- Compatible with various battery types including GEL, FLD, Li-on, and AGM.
- WIFI available for monitoring and control via iOS and Android devices.
- Solar energy is prioritized to directly power the load.
- Max Efficiency up to 98%.
- IP21 ingress protection.
4. Specifications
4.1 AN-SCI-ES Series (1000W/1500W)
| Category | Parameter | AN-SCI-ES-1000 | AN-SCI-ES-1500 |
|---|---|---|---|
| Rated Power | Power / VA | 1000W / 1000VA | 1500W / 1500VA |
| Output Type | SINGLE | SINGLE | |
| AC Input | Voltage | 230VAC | |
| Selectable Voltage Range | 170-280VAC (Personal Computers) / 90-280VAC (Home Appliances) | ||
| Frequency Range | 50Hz/60Hz (Auto sensing) | ||
| AC Output | AC Voltage Regulation | 230VAC ± 5% | |
| Surge Power | 2000VA | 3000VA | |
| Efficiency (Peak) PV to INV | 98% | ||
| Efficiency (Peak) Battery to INV | 94% | ||
| Transfer Time | 10 ms (Personal Computers); 20 ms (Home Appliances) | ||
| Waveform | Pure Sine Wave | ||
| Battery & AC Charger | Battery Voltage | 12VDC | 24VDC |
| Floating Charge Voltage | 13.5VDC | 27VDC | |
| Overcharge Protection | 16VDC | 32VDC | |
| Maximum AC Charge Current | 40A | ||
| Solar Charger | Maximum PV Array Power | 600W | 1200W |
| MPPT Range @ Operating Voltage | 20-150VDC | 30-150VDC | |
| Maximum PV Array Open Circuit Voltage | 150VDC | ||
| Maximum Solar Charging Current | 40A | ||
| Max (AC+Solar) Charging Current | 80A | ||
| Physical | Dimension (D*W*H) | 286*240*91mm | |
| Net Weight | 3 kg | 3.5 kg | |
| Gross Weight | 3.5 kg | 4 kg | |
| Operating Environment | Humidity | 5% to 95% Relative Humidity (Non-condensing) | |
| Operating Temperature | –10°C - 50°C | ||
| Storage Temperature | –15°C - 60°C | ||
4.2 AN-SCI-ECO Series (2000W/3000W)
| Category | Parameter | AN-SCI-ECO-2000 | AN-SCI-ECO-3200 |
|---|---|---|---|
| Rated Power | Power / VA | 2000VA / 1600W | 3200VA / 3000W |
| AC Input | Voltage | 230VAC | |
| Selectable Voltage Range | 170-280 VAC (Personal Computers) / 90-280 VAC (Home Appliances) | ||
| Frequency Range | 50 Hz/60 Hz (Auto sensing) | ||
| AC Output | AC Voltage Regulation (Batt. Mode) | 230VAC ± 5% | |
| Surge Power | 4000VA | 6400VA | |
| Efficiency (Peak) PV to INV | 98% | ||
| Efficiency (Peak) Battery to INV | 94% | ||
| Transfer Time | 10 ms (Personal Computers); 20 ms (Home Appliances) | ||
| Waveform | Pure Sine Wave | ||
| Battery & AC Charger | Battery Voltage | 12VDC | 24VDC |
| Floating Charge Voltage | 13.5VDC | 27VDC | |
| Overcharge Protection | 16VDC | 33VDC | |
| Maximum AC Charge Current | 60A | ||
| Solar Charger | Maximum PV Array Power | 2000W | 3000W |
| MPPT Range @ Operating Voltage | 30-400VDC | ||
| Maximum PV Array Open Circuit Voltage | 400VDC | ||
| Maximum Charging Current | 80A | ||
| Physical | Dimension (D*W*H) | 360*270*100mm | 390*270*100mm |
| Net Weight | 4.4 kg | 5.4 kg | |
| Interface | WIFI | ||
| Operating Environment | Humidity | 5% to 95% Relative Humidity (Non-condensing) | |
| Operating Temperature | –10°C - 50°C | ||
| Storage Temperature | –15°C - 60°C | ||
5. Installation and Setup
5.1 Component Identification
Familiarize yourself with the inverter's components before installation.
5.2 System Wiring Diagram
The following diagram illustrates a typical wiring setup for the hybrid solar inverter. Ensure all connections are secure and follow local electrical codes.
5.3 Battery Compatibility
The inverter is compatible with various battery types. Ensure your battery type is correctly selected in the inverter settings.
6. Operation
6.1 Powering On/Off
- To power on, ensure all connections are secure, then switch the Power On/Off switch to the 'On' position.
- To power off, disconnect all loads, then switch the Power On/Off switch to the 'Off' position.
6.2 LCD Display and Buttons
The LCD display provides real-time information about the inverter's status, including input/output voltage, battery status, and load levels. Use the function buttons (Home, Up, Down, Enter) to navigate through menus and configure settings such as battery charging current, AC/solar charger priority, and acceptable input voltage range.
6.3 Video Overview
Watch this video for a visual guide on the inverter's physical aspects and connections.
7. Maintenance
- Regular Cleaning: Keep the inverter's vents and surfaces clean from dust and debris. The built-in anti-dust kit helps, but periodic cleaning ensures optimal performance.
- Connection Checks: Periodically inspect all electrical connections (AC input/output, PV input, battery input) to ensure they are tight and free from corrosion.
- Environmental Conditions: Ensure the inverter operates within the specified humidity (5% to 95% non-condensing) and temperature (–10°C to 50°C) ranges. Avoid direct sunlight or excessive heat.
- Battery Health: Monitor your battery's health and charge levels. The smart battery charge design helps optimize battery life, but regular checks are recommended.
8. Troubleshooting
This section provides basic troubleshooting steps for common issues. For more complex problems, please contact customer support.
- Inverter Not Turning On: Check the power on/off switch, input breaker, and all power connections. Ensure the battery voltage is within the acceptable range.
- No AC Output: Verify AC input and output connections. Check for any fault indicators on the LCD display. Ensure the inverter is not in a fault state.
- No Solar Charging: Check PV input connections and ensure solar panels are receiving adequate sunlight. Verify PV array open circuit voltage and operating voltage are within specifications.
- Battery Not Charging: Check battery connections and ensure the battery type is correctly configured. Verify AC input and solar input are present and within limits.
- Fault Indicator On: Refer to the LCD display for specific fault codes or messages. Consult the full user manual (if available) for detailed explanations of fault codes.
9. User Tips
- Optimal Performance: For best results, ensure your solar panel array and battery bank are correctly sized for your inverter model and energy consumption needs.
- Monitoring: Utilize the available WIFI connectivity to monitor your inverter's performance and battery status via the dedicated app (iOS and Android). This allows for remote oversight and early detection of potential issues.
- Ventilation: Always ensure adequate airflow around the inverter to prevent overheating, especially during peak operation.
10. Warranty and Support
For warranty information and technical support, please refer to the documentation provided with your purchase or contact the seller directly. Warranty terms may vary by region. For example, customers in Ukraine should inquire about specific warranty provisions applicable to their location.
