1. Product Overview
The JIKONG JK-B2A24S20PHCR Smart BMS (Battery Management System) is an intelligent protection board designed for large-capacity series lithium battery packs. It integrates essential functions such as voltage acquisition, high-current active balancing, overcharge, over-discharge, overcurrent, and over-temperature protection, along with advanced features like a coulomb meter, Bluetooth communication, and GPS remote capabilities.
This BMS is suitable for Li-ion, LiFePO4, and LTO battery types, supporting configurations from 8S to 24S. It utilizes energy transfer active balancing technology with independent intellectual property rights, capable of achieving a continuous balance current of 1A/2A. This high-current active equalization ensures battery consistency, extends battery range, and delays battery aging.
The system includes a mobile APP compatible with Android and iOS operating systems, allowing users to monitor battery status, modify working parameters, and control charge/discharge switches via Bluetooth. Its compact size, ease of operation, and comprehensive functionality make it ideal for various applications, including small sightseeing vehicles, mobility scooters, shared cars, high-power energy storage systems, base station backup power supplies, and solar power stations.

2. Key Features
The JIKONG JK-B2A24S20PHCR Smart BMS offers a rich set of features to meet diverse daily needs and ensure optimal battery performance and safety:
- LED Bluetooth Status Indicator: Provides visual feedback on Bluetooth connection status.
- APP Bluetooth Remote Operation: Control and monitor the BMS wirelessly via a mobile application.
- Battery Capacity Calculation: Accurate estimation of battery state of charge.
- High Precision Voltage Acquisition (±3mV): Ensures precise cell voltage monitoring.
- High Precision Current Acquisition: Accurate measurement of charge and discharge currents.
- Support Information Screen Display: Compatible with external display screens for real-time data.
- Accurate Time Logging: Records operational data over time.
- Optional Communication Interfaces: Supports RS485 and CAN for integration with other systems.
- Optional Alarm Function: Alerts users to potential safety risks like over-temperature, overcharge, or over-discharge.
- Optional Parallel Function: Enables use in parallel battery pack configurations.
- Optional Heating Function: Prevents performance degradation in low-temperature environments.
- Support GPS Communication: For battery location tracking.
- Optional ACC Detection Function: Used for enabling discharge.
- Comprehensive Protection: Includes charge overcurrent, charge overvoltage, charge over-temperature, low-temperature during charge, discharge overcurrent, discharge undervoltage, discharge over-temperature, and short circuit protection.



3. Specifications
The following tables detail the technical specifications for the JIKONG JK-B2A24S20PHCR Smart BMS. Please note that data tolerance range is ±2mm for dimensions.
3.1. General Parameters
| Attribute | Value |
|---|---|
| Brand Name | JIKONG |
| Type | LIFEPO4 Battery BMS |
| Handware or Smart | SMART BMS |
| Balance Function | Active Balanced BMS |
| Charge and Discharge Port | Common Port BMS |
| Usage Scenario | Power BMS, Energy Storage BMS, 3C Digital BMS |
| Function | Overcharge Protection, Over Discharge Protection, Overcurrent Protection, Short Circuit Protection |
| High-concerned chemical | None |
| Certification | None |
| Origin | Mainland China |
3.2. Electrical Parameters (200A Protection Board)
| Parameter | Value | Unit |
|---|---|---|
| Supply Voltage | 20-100 | V |
| Operating Power Consumption | <800 | mW |
| Operating Temperature | -30 to 70 | °C |
| Maximum Number of Collection Strings | 24 | Strings |
| Maximum Balancing Current | 2 | A |
| Maximum Charging Current | 200 | A |
| Maximum Discharge Current | 200 | A |
| Maximum Instantaneous Current | 400 | A |
| Maximum Internal Loop Resistance | 0.275 | mΩ |
3.3. Physical Dimensions
| Parameter | Value | Unit |
|---|---|---|
| Protective Plate Size | 162 × 102 × 20.4 | mm |
| Finished Weight | 560 | g |


4. Setup and Installation
The JK-BxAxxS-15P/20P series protection board is designed for 7-24 series lithium battery packs. The wiring method varies depending on the number of cells in your battery pack. Always ensure all connections are secure before powering on the BMS.
4.1. Packing List
Before installation, verify that all components are present:
- BMS Unit (x1)
- Switch (x1, long 50cm)
- NTC Temperature Sensor (x1, long 40cm)
- Sampling Line B (x1, long 70cm)
- Sampling Line A (x1, long 70cm)

4.2. Wiring Instructions
Follow these steps for proper wiring:
- Connect all the balance cables to the BMS.
- Insert the main power cables (B-line and P-line) into the BMS.
- Connect the B-line and the P-line to the battery pack.
Refer to the diagrams below for specific wiring configurations based on your battery string count.


4.3. Interface Definition
The BMS features various interfaces for communication, sensors, and control. Refer to the detailed interface definitions in the PDF manual (Section 5.2, pages 24-26) for pin assignments and functions, including:
- P1 (XH-15AW): Balance and Acquisition Interface (B-, B1-B23, B24)
- P2 (XH-11AW): Balance and Acquisition Interface (B15-B23)
- P3 (XH-4AW): Temperature Interface (T1A, T1B, T2A, T2B)
- P4 (A1254WF-4A): Communication Interface (CAN_L, CAN_H, RS485_A, RS485_B)
- P5 (1.25T-4PWT): UART Interface (GND, RX, TX, VGPS)
- P6 (A1254WF-6A): Display Interface (K-, K+, GND, B)
- P7 (A1254WF-3A): Parallel Interface (P-status, P-EN, GND)
- P8 (A1254WF-2A): Alarm Interface (GND, VCC)
- P9 (A1254WF-5A): ACC Interface (C Detect-, C Detect+, NC, ACC-, ACC+)
- Heating Wire: HT- (Heater element negative electrode)
- Bluetooth Connection Indicator: LED that is steady on when connected, blinking when disconnected.
- P- and B- Terminals: Connect to external load/charger negative terminal and negative battery terminal respectively.
5. Operation
5.1. Device Activation
Before powering on the protection board, double-check that the balance cables are correctly connected and that the P- and B- lines are properly attached. Ensure the protection board is securely fixed to the battery pack. Incorrect connections can lead to abnormal operation or damage.
The protection board does not have a power-on control switch. It is designed for charging activation mode, meaning the charger voltage should be 2V higher than the battery voltage. After assembling the battery, connect the charger to activate the board.
In addition to charging activation, the BMS supports key activation and display activation. If you have an optional display screen and button, simply insert the cable into the display interface and press the button to activate.
5.2. Mobile APP and PC Software
The JIKONG Smart BMS can be monitored and configured via a mobile APP (Android/iOS) and PC software. These tools provide a comprehensive view of battery status and allow for parameter adjustments.


5.3. APP Installation
To install the mobile APP, scan the QR code below. An Android version 7 minimum is required for the Android APP.

5.4. Parameter Setting
The APP allows users to adjust various parameters to customize the BMS operation according to their specific battery type and application needs. This includes setting equalization trigger voltage differences, protection thresholds, and communication protocols. For detailed instructions on parameter settings, please refer to the "Instructions for Setting Protection Board Parameters" section in the full PDF manual.
5.5. Active Equalization
The BMS employs active equalization to transfer energy from high-voltage cells to low-voltage cells, maintaining battery consistency. Users can set the balance trigger pressure difference (mV) in the APP. When the voltage difference between any two battery strings exceeds the set value, equalization automatically activates and continues until the difference is within range. The default balance current is 1A/2A, adjustable based on battery capacity. If not needed, the balancing function can be turned off in the APP.


5.6. Heating Function
The optional heating function uses a resistance heater or heating film to warm the battery in low-temperature conditions, preventing performance issues. The designed heating current is 10A. Users can switch this function on/off via the APP based on ambient temperature. It is recommended to install a temperature control switch (e.g., 45°C to 65°C normally closed type) in series with the heating circuit as a secondary safety measure.
5.7. Communication Functions
The BMS supports optional CAN and RS485 communication. Users can select CAN or RS485 for multiplexed ports on the APP's BMS control page. Address and communication protocol can be set according to specific requirements. Refer to the Jikong Protection Board communication protocol document for details.

6. Protection Functions
The JIKONG Smart BMS is equipped with a comprehensive suite of protection features to ensure the safety and longevity of your battery pack:
- Charge Overvoltage Protection and Recovery: Standard feature. Users can set single overcharge protection voltage and recovery voltage via the APP. If any cell exceeds the set voltage during charging, the BMS stops charging. Charging resumes when all cell voltages fall below the recovery voltage.
- Discharge Undervoltage Protection and Recovery: Standard feature. Users can set battery undervoltage protection voltage, recovery voltage, and automatic shutdown voltage via the APP. If any cell falls below the protection voltage during discharge, the BMS stops discharging. Discharge resumes when all cell voltages rise above the recovery voltage. If any cell falls below the automatic shutdown voltage, the BMS will automatically shut down.
- Charge Overcurrent Protection and Recovery: Standard feature. Users can set continuous charging current, overcurrent delay, and recovery time via the APP. If the charging current exceeds the set value for the specified delay, charging stops. It resumes after the recovery time.
- Discharge Overcurrent Protection and Recovery: Standard feature. Users can set continuous discharge current, overcurrent delay, and recovery time via the APP. If the discharge current exceeds the set value for the specified delay, discharging stops. It resumes after the recovery time. (Note: Maximum continuous discharge current should not exceed 150A/200A).
- Overtemperature Protection and Recovery: Standard feature for both charge and discharge. Users can set over-temperature protection and recovery values via the APP. If the BMS detects temperatures above the set limit, the corresponding operation (charge/discharge) is halted until temperatures return to safe levels.
- Low Temperature Protection and Recovery: Standard feature for charging. Users can set low-temperature protection and recovery values via the APP. If the BMS detects temperatures below the set limit, charging is halted until temperatures rise above the recovery level. For extremely cold environments, using the optional heating function is recommended.
- Short Circuit Protection and Recovery: Standard feature. The BMS automatically detects and protects against short circuits. Users can adjust the short circuit protection delay and recovery time via the APP if needed, especially during initial connection of chargers or loads with high inrush currents.
- Emergency Switch: Standard feature. In case of critical issues like over-temperature, over-discharge, overcharge, or cell drop, activating the emergency switch via the APP allows 30 minutes of continued charge/discharge operation, providing an emergency use period.
- Intelligent Sleep: Standard feature. The BMS can enter an intelligent sleep mode (after 26 consecutive hours of charge/discharge current less than 1A) to reduce self-consumption. It can be reactivated by pressing a button or connecting a charger.
7. Maintenance
The JIKONG Smart BMS is designed for durability and reliability. Its fully enclosed aluminum alloy shell provides effective dustproof and waterproof protection, reducing the risk of damage to internal electronic components from external environmental factors. High-strength insulating material filling further absorbs vibration and external pressure.

To ensure optimal performance and longevity:
- Keep the BMS clean and free from excessive dust or debris.
- Avoid exposing the unit to extreme temperatures or humidity beyond its specified operating range.
- Regularly check all wiring connections for tightness and signs of wear.
- If the BMS is exposed to water or excessive moisture, ensure it is thoroughly dried before continued use.
- Periodically check the APP for any alarm notifications or unusual readings.
8. User Tips
- Initial Setup: Always double-check all balance wire connections and main power leads (B- and P-) before applying power to the BMS. Incorrect wiring can cause damage.
- APP Monitoring: Utilize the mobile APP to regularly monitor your battery's health, cell voltages, and temperature. This helps in proactive maintenance and identifying potential issues early.
- Parameter Customization: Take advantage of the APP's parameter settings to fine-tune protection thresholds and balancing currents to match your specific battery chemistry and application requirements.
- Low Temperature Operation: If operating in cold climates, consider enabling the optional heating function to maintain battery performance and prevent charging issues.
- Firmware Updates: Check the manufacturer's website or APP for any available firmware updates to ensure your BMS has the latest features and bug fixes.
9. Troubleshooting
If you encounter issues with your JIKONG Smart BMS, consider the following general troubleshooting steps:
- No Power/Activation Issue: Ensure all connections are secure. Remember that the BMS activates upon connecting a charger (charger voltage 2V higher than battery voltage) or by pressing the optional activation button/display.
- Abnormal Readings in APP: Verify that all balance wires are correctly connected to the battery cells and the BMS. Check for any loose connections.
- Protection Triggered: If a protection (e.g., overvoltage, overcurrent) is triggered, the APP will usually indicate the cause. Address the underlying issue (e.g., reduce charge current, check cell balance) before attempting to reset.
- Communication Problems: If the APP cannot connect via Bluetooth, ensure Bluetooth is enabled on your device and the BMS is within range. For RS485/CAN, check wiring and protocol settings.
- Heating Function Not Working: Verify the heating element connection and ensure the function is enabled in the APP. Check for any temperature control switch in the circuit.
- Persistent Issues: If problems persist after basic troubleshooting, consult the detailed PDF manual for specific error codes or advanced diagnostics.
10. Warranty and Support
For detailed warranty information, technical support, or service inquiries, please refer to the official JIKONG documentation or contact the manufacturer directly. The full user manual in PDF format, which includes comprehensive details on parameter settings and advanced functions, can be accessed via the link provided in the product description or by scanning the QR code for the mobile APP.
PDF Manual Reference: A comprehensive user manual (PDF) is available for download at https://manuals.plus/m/47f3730963d6e2f9121fd9628156dca66d8f8b25d656c52ee275c9e61b2707bd. This document contains in-depth information on product specifications, interface definitions, and detailed parameter settings.