ULTIMEA Poseidon D80

Contents

ULTIMEA Poseidon D80 7.1 Surround Soundbar User Manual

Model No.: U2620

Experience immersive 7.1 channel surround sound with Dolby Atmos, a wireless subwoofer, and smart app control.

1. Safety Instructions

Please read this user manual carefully and save it for future reference. Do not make unauthorized alterations to the product, doing so may compromise safety, regulatory compliance, system performance, and may void the warranty.

  • Avoid dropping.
  • Do not disassemble.
  • Do not submerge in water.
  • Avoid extreme temperatures.
  • Do not use the device outdoors during thunderstorms.
  • Use original or certified cables.
  • Do not place dangerous items on top of this device (e.g., liquid filled objects, lit candles).
  • Clean with a dry, soft lint-free cloth. Do not use any corrosive cleaner or oil.
  • To avoid hearing damage, do not listen for extended periods at high volume.
  • Do not expose the batteries to extreme heat sources such as direct sunlight or open flames.
  • The ideal operating temperature for this product and its accessories is between 41°F/5°C and 95°F/35°C.
  • The adapter should be installed near the device and should be easily accessible.
  • Do not use this product in environments of extreme heat or cold. Never expose this device to strong sunshine or wet environments.

2. Product Overview & Accessories

2.1. Package Contents

The ULTIMEA Poseidon D80 system includes the following components:

  • 1x Subwoofer
  • 1x Soundbar
  • 4x Surround Speakers
  • 1x Power Adaptor
  • 1x Subwoofer Power Cable
  • 1x Stereo 3.5mm to RCA Audio Cable
  • 2x Front Left/Right Surround Cables (3m each)
  • 2x Rear Left/Right Surround Cables (6m each)
  • 1x HDMI Cable
  • 1x Digital Optical Cable
  • 1x Remote Control
  • 1x Wall Mounted Kit
  • 1x Wall Bracket
  • 1x Mounting Screws for Speakers
  • 1x User Manual (PDF reference: User manual (PDF))

2.2. System Components

The Poseidon D80 system consists of a soundbar, a wireless subwoofer, and four wired surround speakers, all controllable via a dedicated app.

ULTIMEA Poseidon D80 7.1 Surround Sound System with App Control and Dolby Atmos
Overview of the ULTIMEA Poseidon D80 7.1 Surround Sound System, highlighting app control and Dolby Atmos integration.
7.1 Surround Sound System diagram with 460W Peak Power, 6.5 inch Subwoofer, and App Control
Diagram illustrating the 7.1 Surround Sound System, featuring 460W Peak Power, a 6.5-inch Subwoofer, and App Control. Recommended for rooms up to 538 sq ft / 50 sq m.

3. Setup & Installation

3.1. Soundbar Controls

The soundbar features a control panel with the following buttons:

  • Power Button (“①”): Press to power on/off.
  • Source Button (“②”): Press to switch between eARC, HDMI IN, Optical, Bluetooth, AUX, and USB inputs.
  • Bluetooth Button (“③”): Press to switch to BT channel and enter pairing mode. Hold for 3 seconds to disconnect the current device and connect to a new device manually (BT ID: Poseidon D80).
  • Volume Down (“-”): Decrease volume.
  • Volume Up (“+”): Increase volume.

3.2. Remote Control Functions

The remote control provides comprehensive control over the soundbar and its settings:

Remote Control Layout for ULTIMEA Poseidon D80 Soundbar
Detailed layout of the ULTIMEA Poseidon D80 remote control with all function buttons.
  • Power (①): Power on/off.
  • eARC (②): Switch to HDMI eARC channel.
  • HD IN (③): Switch to HDMI IN channel.
  • OPT (④): Switch to OPTICAL channel.
  • AUX (⑤): Switch to AUX channel.
  • BT (⑥): Switch to Bluetooth channel.
  • USB (⑦): Switch to USB channel.
  • SUB PAIR (⑧): Hold for 3s to pair subwoofer.
  • USB REPEAT (⑨): Toggle single loop/list loop playback in USB mode.
  • Volume Up/Down (⑩, ⑪): Adjust volume.
  • Previous/Next (⑫, ⑬): Skip tracks in BT/USB mode.
  • Play/Pause (⑭): Play/pause in BT/USB mode.
  • MUTE (⑮): Mute/unmute sound.
  • LED DIMMER (⑯): Adjust display brightness (5 levels), hold for 3s to turn off LED display.
  • BASSMX (⑰): Adjust bass level (-6 to +6).
  • MIDRANGE (⑱): Adjust alto level (-6 to +6).
  • TREBLE (⑲): Adjust treble level (-6 to +6).
  • EQ Modes (⑳-⑸): Select Movie, Music, Voice, Sport, Game, Night modes.
  • SURROUND (⑹): Adjust surround sound level (-6 to +6).
  • PROMPT TONE (⑺): Adjust prompt tone level (0 to 3).

3.3. Connecting to TV via HDMI eARC / ARC

For optimal audio quality, especially with Dolby Atmos, use the HDMI eARC/ARC connection.

  1. Connect one end of the HDMI cable to the eARC/ARC port on your TV.
  2. Connect the other end to the eARC port of the soundbar.
  3. Press the “eARC” button on the remote control to select “eARC” input.

Note:

  • Ensure your TV HDMI supports eARC for Dolby Atmos audio signal transmission.
  • For Dolby Atmos content, set your TV's audio output to “Pass Through” (e.g., TV Settings > Home > Settings > Sound > Digital Audio Output > Pass Through).
  • For DTS content, set your TV's audio output to “PCM”.
  • Enable “CEC” function on your TV. When eARC/ARC is connected, your TV remote can control the soundbar (power on/off, volume).
HDMI eARC/ARC connection diagram for Soundbar to TV
Diagram showing HDMI eARC/ARC connection from Soundbar to TV.

3.4. Connecting to Other Devices via HDMI IN

To connect external devices like DVD players or game consoles:

  1. Connect an HDMI cable from the HDMI OUT port of your external device to the HDMI IN port on the soundbar.
  2. Connect another HDMI cable from the HDMI OUT (eARC) port on the soundbar to the eARC/ARC port on your TV.
  3. Press the “HD IN” button on the soundbar or remote control to select the HDMI IN channel.
HDMI IN connection diagram for external devices to Soundbar and TV
Diagram showing how to connect external devices (e.g., TV, Projector, Blu-ray players, TV Boxes, Gaming Consoles) to the soundbar via HDMI IN.

3.5. Connecting to TV via Optical / AUX

Alternative connections for TVs without HDMI eARC/ARC.

Optical Connection:

  1. Connect both ends of the optical cable to the OPTICAL OUT port of your TV and the OPTICAL IN port of the soundbar.
  2. Ensure the optical plug is inserted correctly. Do not force it.

Note:

  • If audio is playing from internal TV speakers, mute or minimize TV volume.
  • If there is no sound in Optical Mode, set TV audio output to PCM.

AUX Connection:

  1. Connect the 3.5mm to RCA audio cable from your TV’s RCA AUDIO OUT port to the AUX IN port on the soundbar.
  2. Ensure cable colors match the TV ports.

Note: Unplug the AUX cable from TV and soundbar when switching modes.

3.6. Connecting to Bluetooth®

  1. Press the “BT” button on the soundbar or remote control to enter Bluetooth pairing mode.
  2. Open your phone’s Bluetooth settings, find and select “Poseidon D80” to connect.

Note: If already connected, hold the “BT” button for 3 seconds to disconnect and manually connect a new device.

3.7. Connecting Subwoofer and Surround Speakers

The subwoofer and surround speakers are crucial for the 7.1 surround sound experience.

  1. Use the Front Surround Cables (FL & FR) to connect the soundbar and front surround speakers. Match corresponding color interfaces.
  2. Use the Rear Surround Cables (SL & SR) to connect the subwoofer and rear surround speakers. Match corresponding color interfaces.

Note: When facing the front of the soundbar, the two right surround satellite speakers have red interfaces, and the two left surround satellite speakers have white interfaces. Position accordingly for optimal audio.

7.1 Channel Dolby Atmos Soundbar speaker placement diagram
Diagram illustrating the placement of the 7.1 Channel Dolby Atmos Soundbar components: SL (Rear Left), SR (Rear Right), FL (Front Left), FR (Front Right) Surround Speakers, Soundbar, and 6.5" Wireless Subwoofer.
Two Front Wired Surround Speakers
Image showing two front wired surround speakers, designed to enrich the width and depth of the sound field.
Two Rear Wired Surround Speakers
Image showing two rear wired surround speakers, designed to take your surround sound to the next level.
6.5 inch Big Wireless Subwoofer with BASSMX technology
Image of the 6.5-inch Big Wireless Subwoofer, featuring BASSMX technology for thumping bass.

3.8. Pairing Subwoofer

The subwoofer is pre-paired at the factory. If there is no sound from the subwoofer, you need to re-pair it:

  1. Press and hold the “SUB PAIR” button on the remote control for 3 seconds; the display will show “SUB” flashing.
  2. Press and hold the ON/OFF button on the subwoofer for 5 seconds; the white LED will flash fast.
  3. The white LED will be solid when successfully paired.

3.9. Placement Recommendation

For a better listening experience, lay out the entire system as shown in the diagram below, ensuring full 360° surround sound.

3.10. Wall Mount Installation

The soundbar and surround speakers can be wall-mounted. The wall mount bracket for surround speakers is identical to that of the soundbar, so the vertical hole spacing and installation method are the same.

4. Operating the Sound System

4.1. Smart App Control

The ULTIMEA Smart App allows you to customize your audio experience and keep your soundbar updated.

ULTIMEA Smart App interface showing EQ settings, modes, and firmware upgrade
The ULTIMEA Smart App provides comprehensive control, including 10-band equalizer settings, 121 preset EQ matrices, 6 EQ modes, and firmware upgrade (OTA supported).
ULTIMEA Smart App showing 10-band EQ, 121 preset EQ matrices, 6 EQ modes
The Smart App allows for 10-band equalizer settings, 121 preset EQ matrices, and 6 tailored EQ modes (Movie, Music, Voice, Sport, Game, Night).

4.2. Audio Customization

The ULTIMEA app offers extensive audio customization options:

  • 121 Expert EQ Presets: Tailor your sound to genres like Bass, Pop, Classic, and Rock.
  • 10-Band EQ Modes: Fine-tune specific frequency ranges.
  • 6 Custom Modes: Select from Movie, Music, Voice, Sport, Game, and Night for optimized listening experiences.
121 Preset EQ Matrices for various music genres
Visual representation of 121 Preset EQ Matrices, allowing customization for Bass, Rock, Pop, and Classical styles.
10 Bands Equalizer Settings interface
Interface showing the 10 Bands Equalizer Settings for precise audio adjustment.

4.3. Immersive Sound Experience

The Poseidon D80 leverages advanced technologies for a truly immersive sound:

  • Dolby Atmos: Adapts dynamically to create a 360° sound environment with precise 3D positioning of audio elements.
  • SurroundX System: Ensures precise sound projection to the front, back, and sides, improving spatiality and sound immersion.
  • 360° Auditory Spatial Localization: Algorithms accurately position elements throughout the room.
  • Custom Waveguides: Project sound from wall to wall for an enveloping experience.
Video demonstrating the ULTIMEA Poseidon D80's 7.1 surround sound capabilities, Dolby Atmos, SurroundX technology, and smart app control features, including EQ customization and one-click Bluetooth connection.

5. Maintenance

To ensure the longevity and optimal performance of your ULTIMEA Poseidon D80, follow these simple maintenance guidelines:

  • Cleaning: Use a dry, soft, lint-free cloth to clean the surfaces of the soundbar, subwoofer, and speakers. Avoid using abrasive cleaners, solvents, or oil-based products, as these can damage the finish.
  • Ventilation: Ensure that the soundbar and subwoofer have adequate ventilation. Do not block any ventilation openings. Avoid placing the units in enclosed spaces like bookshelves without proper airflow.
  • Cable Management: Periodically check all cable connections to ensure they are secure and free from damage. Avoid kinking or sharply bending cables.
  • Environmental Conditions: Operate the device within the recommended temperature range of 41°F/5°C to 95°F/35°C. Avoid exposure to extreme heat, cold, direct sunlight, or wet environments.

6. Troubleshooting

If you encounter issues with your Poseidon D80, refer to the following common troubleshooting steps:

  • No Sound from Subwoofer: If the subwoofer is not producing sound, it may need to be re-paired. Follow the “Pairing Subwoofer” instructions in Section 3.8.
  • No Sound in Optical Mode: Ensure your TV’s audio output is set to “PCM” when using the optical connection. Check all cable connections.
  • TV Remote Not Controlling Soundbar (HDMI eARC/ARC): Verify that the “CEC” function is enabled on your TV. Also, ensure the HDMI cable is connected to the eARC/ARC ports on both the TV and soundbar.
  • Speakers Not Connecting: Ensure all wired surround speakers are correctly connected to their respective ports on the soundbar and subwoofer, matching the color interfaces as described in Section 3.7.
  • General Connectivity Issues: Try restarting both the soundbar and the connected device. Check all cables for secure connections.

7. Specifications

Detailed technical specifications for the ULTIMEA Poseidon D80:

FeatureSpecification
Model NumberU2620
Power SupplyAC 100-240V, ~50/60Hz
Soundbar Drivers2.25" x 3 (Soundbar) + 2.25" x 4 (Surround Speaker) + 6.5" (Subwoofer)
Frequency Response35Hz-18kHz
Standby Power<0.5W
Operating Temperature-10°C - 45°C / 14°F - 113°F
Dimensions and Weight
Soundbar (W x H x D)400 x 70 x 90 mm (15.7" x 2.8" x 3.5")
Subwoofer (W x H x D)185 x 288 x 260 mm (7.3" x 11.3" x 10.2")
Surround Speaker (W x H x D)135 x 70 x 90 mm (5.3" x 2.8" x 3.5")
Packaging (W x H x D)476 x 338 x 346 mm (18.7" x 13.3" x 13.6")
Net Weight7.9kg / 17.4lb
Gross Weight10.4kg / 22.9lb
Speaker Maximum Output Power460W
Dolby AtmosYes
Speaker Channels7.1
Remote Control TypeIR Signal
Listening Modes (EQ)Movie, Music, Voice, Sport, Game, Night
Max Sound Pressure Level>98dB
Signal-to-Noise Ratio≥73dB
Distortion<1%
Static Noise38dB
Bluetooth VersionBT5.3
Power SourceAC
Power Supply18V 3A

8. User Tips

  • Speaker Connection: Always ensure all surround speakers are correctly wired and paired according to the instructions to achieve the intended 7.1 channel experience. Pay close attention to matching color interfaces for optimal setup.
  • DTS Decoding: The Poseidon D80 does not support DTS decoding. If you are playing content with DTS audio, ensure your TV's audio output is set to PCM.
  • Smart App for Customization: Utilize the ULTIMEA Smart App for advanced audio customization. It offers 10-band EQ settings, 121 preset EQ matrices, and 6 tailored EQ modes to match your listening preferences. The app also provides regular OTA updates for the latest features.
  • Optimal Placement: For the best surround sound experience, follow the recommended speaker placement guidelines to ensure full 360° audio immersion.

9. Warranty & Support

For any support needs, please contact ULTIMEA customer service:

  • Email: support@ultimea.com
  • US Phone: +1 888-598-8875 (Mon-Fri 9am-5pm PST)
  • EU Phone: +49 89-628-25828 (Mon-Fri 9am-5pm CET)

This device complies with FCC Part 15 rules and ISED Canada’s licence-exempt RSS standards. Operation is subject to specific conditions to prevent harmful interference and ensure acceptance of received interference.

For full Declaration of Conformity and trademark information, please refer to the original user manual PDF.

© 2024 ULTIMEA. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.